Cdw9380nss Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Genuine Ge part

Dishwasher Heating Element

4.9 (8)

By: Ge

Part Number: WD05X10010

This part fixes the following symptoms

Not drying dishes properly

Do-It-Yourself Stories from Customers like You Flashing selection light: i think it fixed the problem by changing out the heating element Michael A. • Henderson , NV • April 19, 2015

Found a service manual that is close enough to my GE dishwasher. Service Manual for GE Dishwasher-EDW4000 was found on the following webpage. http://www.applianceaid.com/pdf/serv-man-EDW4000.pdf Gives enough information to test out the dishwasher. Read it, check out Factory Test Mode. GE should have given this out as a normal User Manual. The usual user manual lack anything to help troubleshoot a problem. Read more

Genuine Ge part

Lower Spray Arm Bearing

4.9 (15)

By: Ge

Part Number: WD01X10107

This is a genuine OEM replacement lower spray arm bearing sourced directly from the manufacturer for use in dishwashers. The lower spray arm spins to distribute water to the dishes during the wash cycle. Thus spray arm bearing supports the spray arm and lessens the friction, which allows it to spin more easily. If the dishes are not clean after the wash and rinse cycle, or the arm is making loud noises, the spin arm bearing may need to be replaced. This bearing is a small metal part that may wear over time. If the bearing is distorted or damaged, the arm will not sit level, and spinning may be very loud, or it may not spin. The spray arm bearing should be replaced. Turn off the breaker or disconnect the power to the dishwasher. Open the dishwasher and pull the bottom rack out. Turn the lower spray arm counterclockwise to remove it. Use a telescoping magnet to pull the bearing up from the hole in the middle. Install the new bearing and reinstall the spray arm. Put the dishrack back inside and reconnect the power.This lower spray arm bearing is a gray metal part that is sold individually. It is designed for use in dishwashers designed by General Electric and Hotpoint.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Leaking water onto the floor John G. • Canmer , KY • May 28, 2015

The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more

Genuine Ge part

Button Plug

5.0 (1)

By: Ge

Part Number: WD01X10223

Do-It-Yourself Stories from Customers like You Top rack rail broken John S. • Fort Lauderdale , FL • June 18, 2016

Replaced all of the broken parts with the new parts from Appliance Parts Pros. Read more

Genuine Ge part

Drain Pump Hanger

By: Ge

Part Number: WD01X10282

Genuine Ge part

Insulation Tub Blanket

By: Ge

Part Number: WD01X10448

Genuine Ge part

Scr 8-18 B Por 1/4 Ss

By: Ge

Part Number: WD02X10130

Genuine Ge part

Door Spring

By: Ge

Part Number: WD03X10022

The front door of a dishwasher is operated in part by the use of door springs. There are typically two door springs on most models. The door spring helps the user open and shut the door efficiently. If the door springs are worn out or broken, a replacement part is required.A visual inspection will determine if a door spring is missing, damaged, or worn out. If the dishwasher door no longer opens and closes smoothly, it's an indication that a repair is required. Replacing a dishwasher door spring is a straightforward process. Locate the existing springs and remove them. Line up the new door springs and hook the ends into place. Wear gloves for protection. Disconnect the dishwasher before starting the replacement.This door spring is an authentic OEM replacement part. It is sold individually. The component is made of durable, high-quality metal materials. The replacement door spring comes sourced directly from the manufacturer. The door spring is fitting for several different models of dishwashers. The part can be installed in General Electric, Hotpoint, and RCA devices.

Genuine Ge part

Door Spring

5.0 (1)

By: Ge

Part Number: WD03X10023

This is a heavy duty door spring used when the dishwasher has a custom wood door panel installed.

Do-It-Yourself Stories from Customers like You GE dishwasher door spring or spring cable was broken Gary C. • Westlake , OH • July 31, 2018

Disconnected dishwasher and moved it out from under the counter. Found that the left side door spring cable was not connected to the spring. The plastic end of the cable was broken off. It was a simple fix with the new part, however, why would any manufacture us a plastic part on an important part of a steel cable? Read more

Genuine Ge part

Water Inlet Gasket

5.0 (1)

By: Ge

Part Number: WD08X10044

Do-It-Yourself Stories from Customers like You Leaking water on the left side facing unit Gary S. • Lutherville , MD • April 05, 2020

Remove the unit. Unscrewed filler cup. Put on new part. FIXED PROBLEM. Read more

Genuine Ge part

Gasket Fill Hole

By: Ge

Part Number: WD08X10060

Genuine Ge part

Hinge Bearing Arm

By: Ge

Part Number: WD12X10025

Genuine Ge part

Spray Arm Water Supply Tube

4.7 (6)

By: Ge

Part Number: WD12X10057

Do-It-Yourself Stories from Customers like You Leaking water onto the floor John G. • Canmer , KY • May 28, 2015

Genuine Ge part

Spray Arm Nozzle

By: Ge

Part Number: WD12X10134

Genuine Ge part

Flood Switch Base

5.0 (1)

By: Ge

Part Number: WD12X10183

Do-It-Yourself Stories from Customers like You Leaking dishwasher. Jacob W. • Newberg , OR • April 07, 2020

I found the schematics on your site and took my best guess at the individual components that I should replace, related to the flood switch. I guessed correctly. Read more