Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix F2 or F34 error codes and inaccurate oven temperatures with this temperature sensor assembly. Moderate DIY repair, 30-60 minutes install time.
Easy peasy. We did the repair on a 9-year-old GE wall oven. Read more
The Fan Blower is an OEM part for GE ranges and wall ovens. This part helps to circulate air within the oven cavity. The fan blower ensures that heat is evenly distributed during cooking, contributing to consistent cooking results, and prevents the electronic components from overheating, which could lead to malfunctions or reduced lifespan of the appliance.
Causes of damage to the Fan Blower can include accumulation of debris and grease, which can obstruct the fan and strain the motor, and mechanical wear over time that affects the fan's efficiency.
Symptoms of a bad Fan Blower in a range include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I had to take the top panels off and two back panels off. Took off about thirty screws. It was very dirty and dusty inside so I took the lower panels off as well to clean and vacuum it. The hardest part was getting the double oven out of the cabinet. Overall it was very doable. Read more
Oven door window pack assembly includes glass pane and frame for viewing food while cooking. Replace if cracked, shattered, or broken from heat damage.
Ordered part using phone support to confirm correct part. Came fast. Used video on YouTube (not exactly the same but close enough) to help. Need Torx #15, 20 but no other special tools. Straight forward job. Be careful handling the broken glass! Read more
The Probe Thermistor is an OEM replacement part for GE wall ovens and ranges. Located inside the oven cavity, this temperature-sensitive probe precisely monitors interior heat to safeguard against overcooking. Causes of a faulty thermistor involve exposure to excessive cooking temperatures, moisture infiltration from spills or steam, or basic failure due to old age. Symptoms of an inadequate probe thermistor include:
This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I looked diligently for this probe for many months and to no avail. So desperate to find it , I Goggled and found this provider for the probe. I was amazed at the timing of the receipt of the item. I received an email within hours that it had been shipped the same day and arrived at my home within less than 48 hours! The price was great and the item was easy to locate on the site.. Thank you for your attention and customer service. I will use these folks again! Read more
The Cooling Fan Sensor Board is an OEM component for GE ovens and ranges. It is an electronic module connected to the main control board that monitors internal temperatures. An onboard thermistor sensor in the board regulates the convection fan relay and fan motor speed based on heating demands during the bake and broil functions.
Causes of a failed Cooling Fan Sensor Board can include moisture damage from spills or steam, faulty soldering connections, or manufacturing defects over time. Electronic components are also susceptible to normal wear from frequent heating cycles.
Symptoms of a bad board fan sensor include:
It is also compatible with Hotpoint, RCA, and KitchenAid wall ovens and range models using the same electronic control system.
The first attempt was to replace the sensor board on the lower cooling fan motor. That didn’t fix the problem. Next, I replaced the lower cooling fan. The oven is working correctly for now. Time will tell. The repair is fairly simple. 1. Pulled oven out of wall onto a platform that I built to be the same height as the bottom of the oven. 2. Took off the bottom back cover as well as the middle cover. I also had to take off a couple of pieces on the left side where the fan is. 3.... Read more
Halogen bulb illuminates your oven cavity so you can monitor cooking without opening the door. Replace when dim or burnt out. Verify fit with your model.
In my case everything is simple. The important thing was my order was received and my notifications kept me abreast until the delivery. Would not hesitate do deal with this company again in the future. Great professional service. Read more
Burner won't light or has weak spark? This top burner igniter creates the spark to ignite gas. Easy DIY repair—remove burner cap and 2 screws to replace.
Accessed your online video on the probable problem and repair, ordered the replacement igniter then replaced it easily. Read more
Fix an oven door that won't open or close properly. This latch assembly includes the oven light switch and secures your oven door during operation.
Replaced part that plastic switch was a part of. Read more
Fixes oven not heating after self-clean cycle. This thermal safety switch cuts power when temperatures get too high. Simple diagnosis with continuity test.
Replace TCO Read more
Chrome-coated oven rack for wall ovens and electric ranges. Replace worn, damaged, or missing racks to restore cooking capacity and oven functionality.
I ordered them and they arrived. Read more
Seals oven door edges to prevent heat loss and maintain cooking temperature. Replace if worn, melted, compressed, or causing uneven heating. Confirm fit with your model number before ordering.
I ordered a replacement and pulled off the old one and put on the new one. Read more
Fix uneven baking or slow convection cooking. This convection fan motor circulates hot air for consistent heat. Moderate DIY repair restores performance.
Covers fastener holes in your oven's inner door liner for a clean finish. Replace when missing, loose, or damaged to keep grease out. Confirm fit with your model.
Oven not reading meat temperature accurately? This meat probe and harness assembly monitors internal food temperature during cooking cycles.
Seals the convection fan assembly to prevent air leaks and maintain even heat distribution. Replace if you notice uneven cooking or temperature fluctuations.
Lubricant cleaner for range and oven control shafts, burner valves, and rack paddles. Dissolves residue and restores smooth operation when parts feel stiff.