Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice compartment door won't stay shut? This icebox door latch secures the ice maker door closed. Easy DIY repair, typically takes 5-10 minutes.
Flat screwdriver. Pry cover latch off. It has two snaps. I was able to get it off without breaking it. Replace latch icebox door. Snap cover latch back on. Five minutes being very careful. Read more
The Freezer Evaporator Fan Motor and Felt Seal is an OEM part for GE refrigerators. This component is essential for circulating cold air throughout the freezer compartment, ensuring even cooling and preventing frost buildup. The felt seal helps to reduce vibrations and noise from the motor, enhancing the overall performance and quiet operation of the freezer.
Causes of a bad fan motor can include electrical issues, wear and tear from regular use, or physical damage. A malfunctioning fan motor can lead to inadequate cooling and temperature inconsistencies in the freezer.
Symptoms of a bad freezer evaporator fan motor and felt seal include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced freezer evaporator fan. The AppliancePartsPros.com video. Very helpful. The fan located in the freezer compartment you must remove the bottom drawer front and the drawers. The fan is located at back wall of the freezer compartment. Be carful removing fan cover. I broke the tab on the bottom and had to glue it. From there I unplugged the fan and remove the fan from the tabs on the right side first then slide it out. Install the new fan in reverse. The fan at the bottom of the... Read more
Refrigerator not cooling properly? A worn fan gasket disrupts airflow and temperature control. This assembly seals the circulation fan compartment.
Not so easy! The fan is similar to a computer cooling fan but has a rounded housing that slips over a round condenser coil. It slides into a shoe bracket at the bottom. It should slide out towards the back of the refrig by approx 1/2 inch then pull up and out. But the fan shroud wraps around the condenser coil causing you not to be able to slide. You must first take a screw out that supports the condenser coil at the opposite end of the condenser "not easy to get to" then push the coil away... Read more
Detachable ice storage bin with hinged door for refrigerator ice dispensers. Replace if cracked, broken, or missing to restore ice containment and access.
Ordered 2 door shelves from Appliance Parts Pros for my GE Profile refrigerator and was pleasantly surprised to receive the parts in two days. Parts were well packaged and fit perfectly. Was very helpful to be able to view my models parts diagram on-line to assure I was buying the right part. Read more
Fix a stuck or hard-to-open freezer drawer with this lower drawer gear. Replaces broken teeth causing drawer issues. Easy DIY repair, no tools needed.
I watched the video online Read more
Fixes weak water dispenser flow and no ice production. Controls water supply to your refrigerator's dispenser and ice maker. DIY-friendly repair.
Replaced water inlet valve Read more
Replacement dairy door bin for refrigerators. Attaches to the door to store butter, cheese, and yogurt. Order if your bin is cracked, broken, or missing.
We found out the part numbers (freezer door shelf/brackets and dairy bin) from the GE website (for Profile model even though we have the basic model). Parts cam 2 days later. No tools were needed to install both items. Read more
The Connector Gear Pinion is an OEM part for GE refrigerators. It is integral to the smooth operation of the freezer drawer, connecting the rail system and allowing the drawer to open and close effortlessly.
Causes of a bad connector gear pinion can include general wear and tear over time, excessive force applied during operation, or debris causing obstructions within the mechanism.
Symptoms of a bad Connector Gear Pinion include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Installed new connector gear pinion Read more
The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.
Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.
Symptoms of a compromised screw placement include:
This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you . Read more
Fixes slow water dispensing or small ice cubes in your refrigerator. The filter manifold connects your water filter to the dispenser and ice maker.
You need to pull the refrigerator out and disconnect the two water lines. Quick connect is very easy and not even one drop of water leaked. Make note of which water line connects where. The hose with the red mark connected to the input from the wall. The line with the blue mark connected to the line going back into the refrigerator. Open the refrigerator and remove the rear Phillips head screw from the filter holder. With a flathead screwdriver carefully pry the white manifold bracket so it... Read more
Lower drawer gear for bottom-mount refrigerators. Installs on the left side of the freezer drawer assembly. Replace if cracked, broken, or damaged.
Replaced the fan with the part ordered. Required the removal of a shelf and the lower drawer to remove access plate. Read more
Folding center strip that seals the gap between French doors. Replace if worn, damaged, or causing air leaks and condensation. Verify fit by model number.
Quickest repair ever!! Read more
Water filter bypass plug allows your refrigerator to operate without a filter by creating direct water flow. Replace if damaged or worn. Confirm fit with your model.
Ordered a bypass and installed it. Read more
Secures the crossbar in your refrigerator's interior for stable shelving support. Replace if pin is broken, missing, or worn to restore proper fit.
Fix a refrigerator that clicks but won't cool by replacing the compressor start device. This relay and overload assembly helps start the compressor reliably.
Replaced TSD combo. Read more
Fix refrigerator lights that won't turn on when you open the door. This light door switch activates interior lighting. DIY repair in under 30 minutes.
I tested the conductivity across the door switch and found the switch had failed. Read more