Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
This top panel replaces the outer cover above the cooktop control area to restore the appliance's finished appearance and protect internal components from spills and heat. It fits into the appliance's front top assembly for a secure finish. What it does:
Ground
White cover panel that installs on top of your dryer cabinet. Replace if cracked, rusted, loose, or missing to restore a clean appearance.
I watched a YouTube video how to remove the top of my dryer cover. It just required removing a few screws. Read more
Replacement screw for securing dryer components like drum supports, panels, and housings. Needed when screws are lost, stripped, or damaged during repair.
Started by replacing the belt - which was easy to do following the APP video on YouTube. Quickly learned that wasn't the problem. Took the dryer apart again and found that the issue was the glides were completely worn down on the bearing. Looked to replace just those, but saw the bearing was too worn to hold them, so got a new one as well (and a new screw as I dropped one and didn't want to take even more of the dryer apart!). Installing new glides (you need 4 of these with a new bearing) and... Read more
The Knob Clip is an OEM part for GE washing machines and dryers. This small but crucial component is designed to secure the control knob to the appliance's control panel.
Over time, knob clips can wear out or break due to frequent use or accidental damage. When this happens, the control knob may become loose, fall off easily, or fail to engage the control panel properly, making it difficult to set the appliance to the desired cycle or function.
Symptoms of a bad Knob Clip include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I actually called a repair service in our area. The serviceman asked questions and detected that I didn't need a timer unit but thought it was just a knob that was required. He offered to come out but the expense would be considerable. I am SO relieved that it was indeed the knob, and the dryer was fixed. In this time in our lives, every penny counts. I must applaud the serviceman for his honesty and dedication to his trade. He directed me to this website, but also added if there were any... Read more
The Drum Slide is an OEM replacement part for GE clothes dryers. It supports the front of the dryer drum, allowing it to rotate smoothly and quietly. Made of durable materials, this component reduces friction as the drum spins, ensuring that the appliance operates with minimal noise and wear. Causes for a malfunctioning Drum Slide can include wear and tear from the constant rotation of the drum, accumulation of lint or debris causing friction, or damage due to overloading the dryer may also disrupt slide movement quality over time. Symptoms of a faulty drum slide include:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
After removing the top panel of the dryer, I removed 2 screws down inside (with unusual square head) to free the front panel then disconnected the wiring connecting the front panel to the dryer by gently pushing at the clips with a flathead screwdriver; this allowed me to fully remove the front panel. There is a large round lip on the front panel which holds the drum in place, and it was easy to see that the felt around this lip had degraded and turned completely orange and was the source of... Read more
The Handle Door is an OEM part for GE dryers. This door handle allows for easy opening and closing of the dryer door, providing a secure grip to access the drum.
Common causes for door handle failure include regular wear from frequent use, forceful handling, and material fatigue over time.
Symptoms of a failing Handle Door include:
Ordered new part Read more
It was fast and simple. Pulled off the old one and snapped the new one in place. Took only a couple of minutes. Read more
Researched part numbers, ordered and replace with ease. Read more
The Drum Support Bearing is an OEM part for GE dryers. This part allows the smooth rotation of the dryer drum. This small yet crucial component plays a pivotal role in the dryer's operation, supporting the back of the drum as it turns, and ensuring that clothes are dried evenly and efficiently.
Over time, the drum support bearing may wear out or become damaged due to the constant friction and heat generated during the dryer's operation.
Symptoms of a bad Drum Support Bearing include:
Replaced all wear parts (belt, idler pulley, drum support, glides). Read more
This felt seal sits at the bottom of your dryer drum opening to prevent hot air from escaping and lint from accumulating. It creates a tight seal between the drum and the dryer cabinet. Replace it if you notice excessive lint buildup around the dryer or reduced drying efficiency.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.