Dskp333ec1ww Parts

This replacement motor strap secures the dryer's drive motor to its mounting bracket so the motor and blower stay aligned and stable, helping reduce vibration and noise for smoother operation. What it does:

• Holds the drive motor firmly to the base/bracket
• Maintains proper alignment of the motor and blower wheel to prevent rubbing
• Helps reduce vibration, rattling, and related noise
• Typical signs of failure: increased vibration, rattling, scraping from the blower area, or a motor that feels loose inside the cabinet

• Includes 1 motor strap

• Disconnect power; for gas dryers, also shut off gas supply
• Access the motor assembly; note the strap's routing/orientation before removal
• Support the motor while releasing the strap to avoid stressing wiring and mounts
• After securing the strap, rotate the drum/blower by hand to verify free movement before reassembly

Size: 8-32 t. Includes 12 screws.

This pulley keeps the dryer drive belt properly guided and tensioned so the drum rotates smoothly. Replacing a worn pulley restores reliable belt tracking and helps eliminate belt noise and slipping. What it does

• Guides and tensions the dryer drive belt so the drum spins evenly.
• Prevents belt rubbing and reduces squealing or grinding noises.
• Helps stop belt slipping that can cause the drum to stop turning or tumble intermittently.
• Supports smooth, quiet drum rotation for consistent drying performance.

• Disconnect power (unplug or switch off breaker) before starting any repair.
• Access may require removing the dryer front panel or lower access panel; follow the appliance's service instructions.
• Inspect the drive belt and replace if cracked or stretched when installing the pulley.
• Reassemble panels and test the dryer on a short cycle to ensure proper belt tracking and quiet operation.

This door gasket seals the fridge/freezer door to maintain proper temperature and efficiency. Replaces a worn or torn seal to help reduce frost buildup and prevent cool air loss. What it does:

• Creates an airtight seal around the door perimeter to keep cold air in and warm air out.
• Helps prevent frost and ice buildup inside the compartment.
• Reduces compressor run time and helps maintain consistent internal temperatures.
• Common symptoms: visible gaps, torn or compressed seal, noticeable temperature fluctuations, or excess frost.

• Disconnect power before starting and work with clean, dry hands.
• Remove the old gasket by loosening retaining screws or pulling from the channel as applicable; inspect the channel for debris.
• Align the new gasket evenly and press into the door channel, working around the perimeter to ensure full contact.
• If needed, soften the gasket with warm water or a low-heat source per OEM guidance to help seat corners; avoid open flames.

This is a single replacement screw used to secure appliance panels and components. It provides a direct one-for-one replacement to restore proper fastening and help eliminate rattles or loose panels. What it does

• Secures trim, access panels, or internal components to prevent movement and vibration.
• Replaces stripped, missing, or corroded screws that cause loose or rattling parts.
• Restores proper alignment so doors, drawers, or panels close and sit correctly.
• Helps maintain safe, stable operation by keeping components fastened.

• Handle with care and use the correct screwdriver to avoid stripping the head.
• Tighten to a snug fit; do not over-torque which can strip threads or crack plastic.
• If the original screw was damaged or the mating thread is stripped, inspect the hole and replace with the correct OEM screw or insert as needed.
• Disconnect power or follow appliance-specific safety steps before accessing internal parts.

This screw is a factory replacement fastener used to secure appliance panels and components. It restores lost or loose hardware so parts sit correctly and operate without rattling or movement. What it does

• Secures panels, brackets, and small components to the appliance frame
• Restores proper alignment and helps eliminate rattling or vibration
• Replaces missing or stripped fasteners that prevent parts from staying fixed
• Matches OEM fit for reliable fastening where the original screw was used

• One replacement screw

• Use the correct-size screwdriver or driver bit to avoid stripping the head
• Power off and unplug the appliance before accessing internal components
• Tighten snugly but avoid overtightening to prevent thread damage
• Keep removed hardware organized so you can install replacements in the original locations

This ground strap assembly provides a secure electrical path from the appliance chassis to the grounding point, helping maintain proper grounding and reduce shock and interference risks. Designed to replace a worn or damaged grounding connection. What it does:

• Connects the appliance cabinet to the designated grounding point to complete the electrical ground path
• Restores a solid metal-to-metal grounding connection when original strap is corroded, broken, or loose
• Helps prevent arcing, intermittent electrical faults, and improper grounding-related behavior
• Supports safe operation of controls and reduces the risk of electrical shock from energized components

• One ground strap assembly (quantity: 1)

• Disconnect power (unplug or shut off breaker) before inspecting or replacing grounding components
• Use basic hand tools to remove and reinstall mounting screws; ensure ring terminals sit flat under screw heads
• Tighten fasteners to firm contact without over-torquing; verify strap is free of paint, corrosion, or debris at contact points

7" diameter

This ceramic terminal insulator protects and supports a range or oven heating-element electrical connection, helping prevent shorts and arcing at high temperatures. It's a simple replacement to restore a secure, insulated terminal connection. What it does

• Insulates and isolates a heating-element or terminal connection from the metal chassis to prevent electrical shorts.
• Helps maintain a stable connection under high-heat conditions so the element can heat properly.
• Common symptom replacement: visible cracking, chipping, burn marks, arcing, or intermittent heating.
• Also used when terminals are loose or the original insulator is missing or degraded.

• One ceramic terminal insulator

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Inspect surrounding terminals and wiring; replace damaged connectors or hardware as needed.
• Handle carefully—ceramic can chip or break if dropped or over-tightened.

This drum slide bearing supports the front edge of the dryer drum with a low-friction surface so it turns smoothly. Replacing worn slides can reduce squeaks or scraping and help prevent damage to the drum and front bearing.

• Provides a low-friction contact point for the front of the drum to rotate smoothly
• Reduces rubbing and wear between the drum rim and front bearing assembly
• Worn slides can cause squealing/scraping noises, rough drum rotation, or marks/snags on clothing near the drum opening
• Common maintenance item; uneven or excessive wear may affect tumbling performance

• Disconnect power; for gas dryers, also shut off gas supply
• Access by removing top and front panel per service instructions; support the drum during service
• Replace slides in matching positions/orientation; replacing all slides together helps ensure even support
• Spin the drum by hand before reassembly to ensure smooth, quiet rotation

This is a replacement knob and clip kit for the control shaft. It restores a secure, easy-to-turn control when the original knob is cracked, loose, or missing, helping you select cycles reliably.

• Turns the control shaft and secures it to the timer or selector
• Helps when the knob is cracked, stripped, wobbly, or falls off
• Can resolve issues selecting or starting cycles due to a loose/missing knob
• Direct-fit replacement designed for compatible models

• Disconnect power before service
• Pull the old knob straight off; remove any remaining clip from the shaft
• Align the new knob and press onto the shaft; install the clip as directed
• Do not force if resistance is high—verify shaft and clip alignment