Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Charcoal filter removes smoke, fumes, and odors from microwave ventilation. Replace every 6-12 months for optimal performance. Confirm fit by model.
Time to change charcoal filter. Read more
Holds the light bulb securely in your microwave for proper interior illumination. Replace if bulb won't stay in place, socket is burned or cracked.
I recently tackled a repair on my GE microwave (model JVM1440BD003, manufactured in 2003) to replace the light bulb sockets for the under-microwave lights. Since one socket was failing, I decided to replace both at the same time to avoid future issues. I used two WB08X10016 light sockets, which are the correct OEM parts for this model. The process started off smoothly thanks to a helpful installation video on the website. It made the job look straightforward: remove five screws to drop the... Read more
The Lower Lever Switch is an OEM replacement part for GE microwaves. This component activates the door interlock switch when the microwave door is closed. It ensures that the microwave only operates when the door is securely closed, preventing any operational hazards. Symptoms of a bad Lower Lever Switch include:
Common causes for a malfunctioning Lower Lever Switch can be attributed to mechanical wear from frequent use, damage incurred during cleaning or use, or internal issues affecting the switch’s activation mechanism. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered new switches (replaced all three- upper and lower door switches and switch monitor- just to make everything new). Received them within 48 hours! You tube video enabled replacement job to be completed by handyman neighbor in 20 minutes (would have been shorter repair time but for my kibitzing). Appliance Parts Pros gets an A+! Will do business with APP on any future appliance repairs! Read more
Replaces a cracked, bent, or missing microwave exhaust damper flap. Installs on top of the unit to direct airflow and prevent drafts when not venting.
Microwave won't heat but runs? A faulty diode cable assembly prevents power conversion. DIYers report 10-minute fixes after diagnosing the issue.
Replaced the high voltage diode. You will need a special Torx screwdriver to remove the tamper resistant screws holding the cover. Once the cover is removed there should be a packet inside containing a schematic and detailed troubleshooting instructions. I used extreme caution to discharge the capacitor. The rest was simple. One screw and a push connector to remove and reinstall the diode. I fired it up and it was good as new. Thanks to AppliancepartsPros for the good guidance and extremely... Read more
Covers the upper front exhaust opening with louvered slots. Replace if cracked, loose, or missing to maintain proper ventilation and appearance.
Replacement glass turntable tray for microwaves. Rotates during cooking to heat food evenly. Order a new tray if yours is cracked, chipped, or broken.
And continued to crack more with each use. Ordered a new on. Quick chat online with a rep to make sure I had correct part, ordered and it got here 2 days later. Fantastic!! Read more
Rotating glass tray for even microwave cooking. Replace if cracked, chipped, or wobbling due to worn hub. Confirm fit with your exact model number.
New one Read more
Circular ring assembly that supports and rotates the glass turntable in your microwave. Replace if cracked, broken, or wheels are worn and damaged.
Outer door handle assembly for microwaves. Installs on the exterior door panel for opening and closing access. Replace if broken, cracked, or damaged.
Ordered a new handle and replaced the old handle. Read more
Microwave turntable not turning? The turntable motor rotates the glass tray for even heating. Simple DIY repair with basic tools in under an hour.
Unplug your microwave. Took the screws off of the bottom of the unit with it still on the cabinet. The whole bottom panel swung down to expose the turntable motor. I took the power cable loose (just pull it off). It was one screw to take the motor out. Word to the wise: DON'T try to take the plastic coupler off before the motor. Their is a tab that holds it in while the motor is in place. If you pry it up you will break it, trust me. ;) Turn the motor out of its housing and it come right out.... Read more
Fix a microwave that won't heat or hums but doesn't start. This capacitor stores energy for the high-voltage circuit. Moderate DIY repair, 30-60 minutes.
Wife let me know the microwave was making grinding noise while I was in garage fixing her car starter, never a dull moment. Further questioning she also said it wan't heating the food. Due to being an odd sized built in $$ unit I had to have repaired. I was getting quotes in the $4-500 range for just the magnetron. I was pretty confident the magnetron was the issue and also ordered a new capacitor and diode since I was going to be in there and a lot of money ahead repairing myself. About... Read more
The Installation Hardware kit is an OEM part for GE Built-In and Over-the-Range microwaves. It contains all mounting screws and brackets needed for installation into upper kitchen cabinetry.
Symptoms of faulty or inadequate hardware include:
Causes can be stripped screw holes, worn brackets, or omitted/lost original hardware disrupting a snug fit. Replacing with this hardware ensures safe support of weighty microwaves above cooktops.
Compatible with GE Profile, Hotpoint, and some Kenmore units, it facilitates installation or re-installation without frustration.
The Door Key is an OEM part for GE microwaves. It is responsible for securely holding the microwave door closed during operation. A sturdy and reliable latching mechanism is important for safety and to prevent leaks of electromagnetic radiation.
Causes of a bad latch can include worn or damaged parts due to normal wear and tear over time. The mechanism undergoes a lot of opening and closing stress with repeated use. Impacts from improper handling can also damage latch components.
Symptoms of a bad latch include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I ordered a new part and was able to install it easily. Read more
Fixes microwaves with no power or that stop mid-cycle. This thermostat switch monitors temperature and protects against overheating. Simple repair.
This is a 25 year old built-in over-the-range appliance. Only previous problem was 1 failed door switch (of 3 total), replaced 2 years ago. First checked all 3 door switches with continuity tester, all ok. Had advice to check thermostat switches, which were all supposedly NC (normally closed), used same tester. Found one thermo that was open, ordered and installed replacement, but oven still dead. Used heat gun to warm the open thermo (while not installed) and using tester again, found that... Read more
Microwave not heating? The magnetron generates the microwaves that heat food. Common repair for units that run but don't warm. DIY-friendly repair.
Replace magnetron. Took longer to remove and disassemble m/w than to replace part. Above range installation. M/w was heavy- be careful. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.