Eid6105 Parts

The Rack Assembly is an OEM replacement part for Frigidaire dishwashers. It provides a sturdy and organized space for placing dishes, glasses, and utensils during the cleaning cycle. The rack is designed to slide smoothly in and out, ensuring easy loading and unloading of items.

Over time, rack assemblies can become damaged due to wear, exposure to harsh detergents, or repeated impact from heavy or improperly placed items. A malfunctioning rack can affect the dishwasher's capacity and the effectiveness of the cleaning process.

Symptoms of a bad rack assembly include:

• Broken or missing tines, making it difficult to secure dishes
• Difficulty sliding the rack in or out smoothly
• Rust or corrosion on the rack's surface
• Reduced capacity or items not staying in place during cycles

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Rack Assembly is an OEM part for Frigidaire dishwashers. It holds silverware securely in place during the cleaning and drying cycles. This basket measures approximately 16.88" X 8" and has two lids. Please Note: This assembly no longer comes as 3 separate pieces and is now 1 piece.

Causes of a bad basket assembly can include regular wear and tear, damage from overloading or mishandling, and degradation from prolonged exposure to water and detergents. Clips, holders, or the basket frame may break or wear out over time, affecting its functionality.

Symptoms of a failed rack assembly are:

• Silverware shifting positions or falling during cycles
• Difficulty loading or removing dishes
• Rust or flaking of the protective coating
• Noise or rattling from a loose or damaged rack

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Upper Rack Assembly is an OEM part for Frigidaire dishwashers. It is designed to hold dishes, glasses, and other items in the upper section of the dishwasher, allowing for efficient and organized cleaning.

Causes of a bad Upper Rack Assembly can include wear and tear over time, damage from heavy or improperly placed items, or issues with the rollers and tracks that allow the rack to slide in and out smoothly.

Symptoms of a bad Upper Rack Assembly include:

• Difficulty sliding the rack in or out
• The rack falling off its tracks
• Rust or corrosion on the rack
• Broken or missing tines that hold dishes in place

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This MultiFence is a multi-position rack fence that mounts to the rack to support and organize dishes, lids, and bakeware. It helps keep items upright and in place so cycles run smoothly and cleaning performance stays consistent. What it does:

• Attaches to the rack and flips/locks to secure items of different sizes
• Helps prevent plates, lids, and trays from tipping or sliding during operation
• Replaces a fence that is cracked, warped, missing, or won't stay in position
• Common symptoms include dishes falling over, rattling during cycles, or poor results from shifted loads

• One MultiFence rack fence

• Disconnect power to the appliance; turn off water supply if servicing a dishwasher
• Pull the rack out; release the retaining tabs or clips to remove the old fence
• Align and snap the new fence onto the rack wires; ensure it pivots and locks properly
• Reinstall the rack and verify smooth operation

The Upper Rack Assembly is an OEM part for Frigidaire dishwashers. This rack provides a secure place for dishes, glasses, and other small items to be cleaned during the wash cycle. 

Causes of a bad upper rack assembly can include regular wear and tear, rust or corrosion from prolonged exposure to water, and damage from heavy or improperly placed items.  

Symptoms of a bad upper rack assembly include:

• Difficulty sliding the rack in and out
• Broken or missing tines
• Visible rust or corrosion
• Dishes not staying securely in place

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Tine Row is an OEM part for Frigidaire dishwashers. It is designed for the left side tine row of your Frigidaire dishwasher. It is designed to hold and support dishes, glasses, and other items securely in the dishwasher rack. The tine row ensures that dishes are properly spaced and positioned for optimal cleaning and drying during the wash cycle.

Over time, tine rows can become damaged or worn out due to repeated use, heavy loads, or mishandling. Bending or breaking of the tines can occur, affecting the overall performance of the dishwasher and potentially causing damage to dishes.

Symptoms of a bad Tine Row include:

• Bent or broken tines
• Difficulty in securely holding dishes
• Rust or corrosion on the tines
• Dishes not being cleaned properly due to improper spacing

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Bracket is an OEM replacement part for Frigidaire dishwashers. This component provides structural support for securing parts within the dishwasher, ensuring proper alignment and stable operation during cycles. Its precise fit is essential for the smooth functioning of your appliance.

Over time, the bracket may wear out or become damaged due to repeated use, corrosion, or accidental impact. A malfunctioning bracket can lead to misaligned components or instability during operation, potentially affecting the dishwasher's performance.

Symptoms of a bad bracket include:

• Loose or misaligned parts within the dishwasher
• Excessive noise or vibrations during operation
• Difficulty in properly installing or adjusting components
• Visible cracks or corrosion on the bracket

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Spring and Cable Assembly is an OEM replacement part for Frigidaire dishwashers. It contains both a spring and cable that coordinate moving parts to provide a balanced opening and closing of the dishwasher door.

Causes of a bad assembly can include failure of internal spring components due to fatigue from extensive use over time. Cables may also experience wear from constant flexing during door movement.

Symptoms of a bad Spring & Cable Assembly include:

• A sagging or unstable door that does not stay securely closed
• Difficulty smoothly opening and closing the door
• Improper latching that allows door to pop back open
• Excessive noise and vibration occurring during wash cycles

This OEM part fits Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Side Mount Kit is an OEM replacement part for Frigidaire dishwashers. It contains mounting brackets, screws, and other hardware required to securely install the dishwasher against cabinetry in a side-by-side configuration. Proper attachment is necessary for stability and safety during operation. 

Symptoms of damaged or missing mounting hardware include:

• Excessive movement or rocking of the dishwasher body
• Potential detachment from cabinets  
• Screws pulling loose from repeated vibrations
• Improper door alignment causing difficulty closing fully

Causes related to normal wear over extended use periods. Damage may occur if weight is applied during improper lifting or installation attempts.  

Compatible models include Electrolux, Gibson, and select Kenmore units.

The Dispenser Assembly is an OEM part for Frigidaire dishwashers. It is responsible for dispensing detergent and rinse aid during the dishwashing cycle, ensuring that the correct amounts are released at the appropriate times for optimal cleaning and drying performance.

Causes of a bad dispenser assembly can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process. These issues can prevent the detergent or rinse aid from being properly released.

Symptoms of a bad dispenser assembly include:

• Improper dispensing of detergent or rinse aid
• Insufficient cleaning or rinsing results
• Leaks or drips from the dispenser area
• The dispenser door not opening or closing correctly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Gasket is an OEM part for Frigidaire dishwashers. This gasket, also known as a door seal, is designed to form a watertight seal around the dishwasher door, preventing leaks during the wash and rinse cycles.

Causes of a bad gasket can include wear and tear from regular use, exposure to high temperatures and detergent chemicals, and damage from sharp objects or improper loading of dishes. Over time, the gasket material can degrade, losing its elasticity and sealing effectiveness.

Symptoms of a bad gasket include:

• Water leaking from the bottom or sides of the dishwasher door
• Visible cracks, tears, or deformation in the gasket
• The dishwasher door not closing properly or sealing tightly
• Moisture or mold buildup around the door seal area

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Wheel Assembly is an OEM part for Frigidaire dishwashers. It includes 1 wheel necessary for attaching to the dishwasher rack, facilitating smooth and easy movement of the rack in and out of the dishwasher. This part is essential for the proper functioning of the dishwasher's loading and unloading process, ensuring convenience and efficiency.

Causes of a bad Wheel Assembly can include wear from regular use, damage from impact while loading or unloading dishes, or corrosion from exposure to water and detergent.

Symptoms of a bad Wheel Assembly include:

• Difficulty sliding the dishwasher rack
• Rack coming off its tracks
• Noisy operation when moving the rack

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Water Valve is an OEM part for Frigidaire dishwashers. This valve controls the flow of water into the dishwasher, ensuring the correct amount of water enters the tub during the wash cycle.

Causes of a bad water valve can include mineral buildup from hard water, electrical failures, or wear and tear from regular use that affects the valve's ability to open and close properly.

Symptoms of a bad water valve include:

• The dishwasher not filling with water
• Leaking water around the valve area
• Inconsistent or insufficient water levels during cycles
• Unusual noises when the valve is in operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This dishwasher rack tine row bracket secures the fold-down tine row to the rack so it pivots and locks correctly. Replacing a cracked or missing bracket helps restore stable plate support and smooth loading.

• Secures the fold-down tine row to the dishrack
• Allows the tine row to pivot between upright and flat positions
• Helps keep dishes from tipping during cycles
• Common symptoms: tines won't stay up, row flops loosely, bracket is cracked/missing

• Disconnect power to the dishwasher before servicing
• Pull out the rack and locate the affected fold-down tine row
• Release the old bracket and snap the new bracket onto the rack wires
• Verify the tine row pivots and latches smoothly before returning the rack

This replacement gasket creates a tight seal between mating components to prevent air and moisture leaks. It helps restore proper airflow and efficiency and can reduce vibration and noise when the original gasket is worn or damaged.

• Forms a seal between parts to prevent air bypass and moisture intrusion
• Helps maintain proper airflow and overall performance
• Cushions components to reduce vibration and rattling
• Replace if the gasket is torn, brittle, compressed, or missing
• Common symptoms include drafts/air leaks, condensation at the seam, unusual noise, or reduced cooling/dehumidifying performance

• Disconnect power to the appliance before servicing
• Remove covers or panels to access the sealed joint; note the gasket's routing/orientation
• Clean and dry mating surfaces; remove old adhesive/foam debris
• Install the new gasket without stretching; press evenly, reassemble, and check for a uniform seal

This replacement pump moves water/condensate through your appliance so it can drain or recirculate as designed. Replacing a weak or failed pump restores proper water removal and helps prevent leaks, overflows, or nuisance shutoffs.

• Moves collected water from the sump/collection area to a drain hose or internal passage
• Maintains correct water level to prevent overflow conditions
• Common failure signs: water won't pump out, leaks near the base, or loud buzzing/grinding from the pump
• May trigger "bucket full," drain, or pump-related error indicators, depending on the model

• Disconnect power before servicing; allow unit to cool, and expect residual water in the lines or pan
• Note hose routing and wiring connections; transfer any clamps, grommets, or fittings from the old pump if reused
• Ensure hoses are fully seated and not kinked; tighten connections and check for leaks after reassembly
• Test operation after installation and water is expelled properly