Fcrg3250 Parts

This glide restores smooth, aligned movement for a refrigerator or freezer drawer so the drawer opens and closes without sticking. Use it to replace a worn or broken glide and reduce scraping, binding, or uneven travel. What it does:

• Guides and supports the drawer so it tracks straight and slides smoothly.
• Replaces worn or damaged glides that cause drawers to stick, bind, or scrape.
• Helps prevent the drawer from coming off the track or shifting out of alignment.
• Reduces noise and uneven movement during opening and closing.

• Disconnect power (unplug the appliance) before servicing to avoid electrical hazards.
• Remove the drawer and any obstructing shelves per the OEM instructions to access the glide.
• Keep or replace original mounting screws; ensure the glide is oriented and seated correctly before tightening.
• Replace those parts to ensure a secure fit.

This insulation panel fits inside the refrigerator cabinet to help maintain consistent temperatures and reduce heat transfer. It preserves cooling efficiency and helps minimize frost and condensation when the appliance is operating properly. What it does:

• Provides thermal barrier between the cabinet and outer shell to help maintain internal temperature
• Helps reduce frost buildup and interior condensation when sealing and cooling systems are functioning
• Can improve energy efficiency by minimizing unwanted heat gain
• Dampens vibration and can reduce operating noise from the compressor area

• Disconnect power to the appliance before starting any repair to avoid electric shock
• Handle insulation carefully—avoid compressing or tearing the material to retain thermal performance
• Remove interior panels or shelving as needed to access the installation area; keep track of fasteners
• If the original insulation is damaged or contaminated, replace it and check nearby seals and gaskets for proper fit

This spring-loaded hinge supports and controls the oven door's movement so it opens smoothly and closes firmly, helping the door seal properly and retain heat. Replacing a worn hinge restores proper door alignment and closing force.

• Provides the pivot and spring tension for controlled door opening/closing
• Helps the door sit flush against the gasket to maintain a proper heat seal
• Common symptoms: door won't fully close, sags or drops, won't hold at a mid-open position, heat escaping from the front
• Typical causes of failure: metal fatigue, spring wear, or hinge deformation from heavy use

• Disconnect power; for gas models, also shut off gas. Allow the oven to cool completely.
• Support the door and engage hinge locks or remove the door.
• Springs are under tension—use gloves and eye protection; do not disassemble the hinge.
• Align with the receivers/slots and test for smooth operation and full closure; consider replacing both for even tension.

This wiring harness connects the appliance's electrical components to restore reliable power and signal routing. It replaces a damaged or worn harness to help resolve power loss and intermittent electrical issues. What it does:

• Transfers power and control signals between components so controls and motors can operate
• Replaces frayed, burned, or broken wiring that can cause intermittent operation
• Helps stop failures that lead to no-start or loss of specific functions
• Restores secure connector fit to reduce arcing or poor connections

• Always disconnect power before servicing the appliance
• Match connectors and wire routing to the original harness; avoid stretching or pinching wires
• Secure fasteners and strain reliefs; verify all connections are fully seated
• If you find heat or burn damage at terminals, inspect adjacent components for root cause

This electrical receptacle is the small connector that secures a wiring plug to an appliance component, restoring a reliable electrical connection and preventing intermittent operation or arcing. What it does:

• Provides a secure plug-in connection between a wire harness and a component
• Restores power to a component when the original connector is cracked, melted, or corroded
• Helps prevent loose connections that can cause intermittent operation or sparks
• Fits the OEM-style wiring configuration for a direct replacement

• Disconnect power to the appliance before starting any repair
• Remove the damaged connector and match the replacement to the harness before installing
• Use basic hand tools; avoid forcing terminals to prevent damage

Color: Black.

This ignitor orifice assembly replaces the gas burner orifice and ignitor mounting used to safely direct gas to the oven burner so the igniter can light. Restores reliable ignition for gas ovens and ranges. What it does:

• Directs gas flow to the oven burner through the correct orifice size for proper ignition
• Positions and secures the ignitor so the spark/heat source can light the burner
• Helps resolve symptoms like a burner that won't ignite, delayed ignition, or weak burner flame
• Works as a service replacement for damaged, clogged, or corroded orifice/ignitor fittings

• One ignitor orifice assembly

• Turn off gas supply and power before starting any repair; follow appliance shutoff procedures
• Handle the ignitor carefully—it's fragile and can be damaged by rough handling or static
• Use appropriate wrenches and avoid overtightening the orifice fittings to prevent damage

This ignitor/orifice assembly sits at the surface burner and provides both the ignition spark and metered gas flow for clean, reliable light-off. Replace it to restore quick starts and consistent flame quality. What it does:

• Provides the ignition spark at the burner via the electrode
• Meters gas through the fixed orifice to set proper flame size
• Wear, cracks, or blockage here can cause clicking with no flame or a burner that won't light without a match
• A damaged or restricted orifice may lead to small, uneven, or yellow flames

• Disconnect electrical power and shut off the gas supply before servicing
• Allow the cooktop to cool; handle the ceramic electrode carefully to avoid damage
• Transfer any burner-specific hardware as needed and secure the spark lead connection
• After reassembly, restore gas and check all joints for leaks with a soapy-water solution; verify proper spark and flame

Replacement evaporator drain tube that channels defrost and condensation water from the evaporator to the drain pan to help prevent water pooling and leaks inside the refrigerator. What it does:

• Directs defrost and condensation water away from the evaporator to the drain pan
• Prevents water collecting in the fresh-food section or under crispers
• A cracked or clogged tube can cause leaks or ice buildup in the freezer
• Restoring proper drain flow reduces the risk of floor leaks and odor from standing water

• Disconnect power to the appliance before starting any repair
• Access may require removing interior rear/freezer panels; follow OEM service instructions
• Inspect and clear any clogs before installing; ensure tube seats securely at both ends

This cast-iron cooktop grate replaces a worn or damaged burner support so pots and pans sit securely while you cook. It restores a stable surface for cookware and keeps burners properly positioned. What it does:

• Supports cookware above the burner for safe, stable cooking
• Keeps burner caps aligned for consistent flame contact
• Replaces cracked, warped, or heavily chipped grates that cause wobbling
• Helps prevent direct contact between cookware and the cooktop surface

• One replacement cooktop grate

• Allow the range to cool completely before removing or installing the grate
• Most installations are lift-out replacements—no tools required; align over the burner and set in place
• Handle with care; cast-iron grates are heavy and can chip enamel if dropped
• Follow your appliance manual and shut off gas/power to the range

This is a replacement mounting screw used to secure panels and components in compatible Frigidaire appliances. It restores proper fit and helps prevent rattles, loose panels, and parts that shift during operation. What it does:

• Fastens trim, panels, brackets, or controls to the appliance frame
• Restores secure attachment to reduce vibration, noise, and movement
• Replaces stripped, missing, or corroded screws that prevent proper assembly
• Works wherever the OEM screw with this part number is specified

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not overtighten to avoid stripping threads or damaging parts
• Keep removed hardware organized and compare parts to the old screw for correct fit

This control console panel covers and protects the appliance's user controls and display while restoring a clean, finished appearance. It provides a new surface for button and touchpad operation and replaces cracked, faded, or damaged panels. What it does

• Protects the underlying control board, buttons, and display from spills and physical damage
• Provides the mounting surface for buttons, touchpads, and indicator windows
• Restores worn, cracked, or cosmetically damaged front surfaces for easier operation
• Resolves issues caused by broken or warped panel surfaces that impede button action

• One replacement control console panel

• Disconnect power before starting any repair to avoid electric shock
• Remove trim, screws, and any adhesive carefully to free the old panel without damaging adjacent parts
• Handle edges and clips gently—replacement panels and trim pieces can be fragile
• Reconnect any ribbon cables or connectors securely; test function before reassembling all trim

This control panel is the front console piece that houses the user controls and protects the range's electronic interface, restoring a clean, functional control surface for safe operation. What it does

• Provides the visible front surface and mounting for control buttons and display elements.
• Restores a cracked, scratched, or warped console surface that interferes with button access.
• Helps stop dirt and moisture from reaching internal switches and circuit boards when intact.
• Can improve the look and usability of the appliance when the original panel is damaged.

• Turn off power to the appliance at the breaker or unplug before starting any work.
• Handle edges and any glass or plastic trim carefully to avoid cuts or damage.
• Remove trim and screws as required to access the console; keep fasteners for reassembly.
• If the panel attaches to electronic components, avoid touching circuitry and reconnect wiring exactly as removed.