Fffu20f2vw Parts

The Fan Mount is an OEM part for Frigidaire refrigerators. It is responsible for holding the evaporator fan in place within the refrigerator's freezer compartment.

A bad fan mount can be caused by regular wear and tear, physical damage, or improper installation. Signs of a faulty fan mount include excessive noise coming from the freezer, reduced cooling performance, or the fan not spinning properly.

Symptoms of a bad fan mount can include:

• Unusual noises coming from the freezer
• Insufficient cooling or uneven temperature
• The evaporator fan not spinning
• Excessive frost or ice buildup in the freezer

Replace your damaged or worn-out fan mount with this genuine OEM part to ensure proper airflow in your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Replace your freezer's control board access cover if controls are exposed to moisture or dust. Shields electronics from damage for reliable operation.

Freezer not cooling or running constantly? This evaporator coil assembly circulates refrigerant to absorb heat and restore proper cold temperatures.

The Freezer Seal is an OEM component specifically designed for Frigidaire refrigerators. This durable rubber seal forms a tight weatherstripping around the perimeter of the refrigerator's freezer door, preventing cold air from escaping. 

Causes of a bad freezer seal include drying out and cracking over many years of use or damage caused by over-tightening the door hinges. 

Symptoms of a bad freezer seal include: 

• Frost or ice buildup around the freezer door seal
• Warm air entering the freezer compartment 
• Higher energy bills due to decreased insulation
• Moisture accumulating in the floor drain 

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This condenser coil assembly removes heat from the refrigerant so the refrigerator can cool properly. It's a direct-fit replacement that restores the cooling loop's ability to shed heat and run more efficiently. What it does

• Exchanges heat from the refrigerant to the surrounding air so the cooling cycle can continue
• Helps the compressor run within normal temperature range
• Commonly replaced when the refrigerator is warm inside or the unit runs continuously
• Needed if the condenser is bent, clogged with debris, or leaking

• One condenser

• Disconnect power to the appliance before starting any repair
• Handle with care — coil fins and tubing can be sharp and easily damaged
• Reinstalling may require removal of back or lower access panels; keep fasteners organized
• Sealed-system work (cutting or brazing refrigerant lines) requires certified HVAC service — do not attempt if refrigerant lines must be opened

This factory screw secures interior or door components in your refrigerator so they stay tight and aligned. Replace missing, stripped, or corroded hardware to eliminate looseness and prevent parts from shifting or rattling during use.

• Fastens brackets, trim, rails, bins, or handles to the cabinet or door
• Restores a secure fit when the original screw is lost, damaged, or rusted
• Helps correct looseness, vibration, and rattling from unsecured parts
• Common symptoms: loose or wobbling handle/trim, misaligned parts, missing hardware

• Disconnect power to the appliance before servicing; turn off water if working near dispenser/ice areas
• Match to the original hardware and install in the same location; reuse any washers/spacers
• Start threads by hand to prevent cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to avoid stripping threads or cracking plastic

Fix a freezer that won't respond to controls or run proper cycles with this main electronic control board. Restores normal operation and user interface.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Replacement mounting screw secures panels, brackets, and trim inside refrigerators and freezers. Restores factory assembly when original fasteners are missing.

This is a replacement drum bearing that supports the dryer drum and helps it turn smoothly for reliable tumbling and even drying. It restores proper drum rotation and reduces noise caused by worn bearing surfaces. What it does:

• Supports the rear/front of the dryer drum so it spins with minimal friction
• Reduces squealing, scraping, or grinding noises from the drum area
• Prevents excessive drum wobble and uneven wear on the drum seal
• Helps restore smooth, consistent drum rotation for better drying performance

• One bearing

• Disconnect power before beginning any repair; follow all safety precautions
• Access typically requires removing the dryer top/back or front panel to reach the drum bearing
• Inspect drum rollers, glides, and seals while the dryer is opened; replace if visibly worn

This hinge attaches the refrigerator door to the cabinet so the door opens, closes and stays aligned for a proper seal. It restores secure door movement and helps prevent rubbing, sagging or uneven gaps. What it does:

• Provides a pivot point for the refrigerator door to open and close smoothly
• Keeps the door aligned to maintain an even seal and temperature control
• Prevents door sagging or misalignment that can cause rubbing or poor closure
• Replaces a worn, bent or damaged hinge to restore reliable operation

• One hinge

• Disconnect power and empty the door before starting; support the door while removing the hinge
• Basic hand tools required; follow manufacturer torque guidance if available
• Inspect mating hardware and seals; replace any damaged fasteners or gaskets

Restores your refrigerator's identification label. Replaces worn, faded, or missing name plates to keep model and serial information visible and complete.

Short hex washer head screw for chest freezers, upright freezers, and compact refrigerators. Replaces lost, stripped, or damaged screws to secure panels.