Need Help?
Call or text
Factory replacement screw for securing panels, brackets, and trim inside your refrigerator. Needed when original screws are missing, stripped, or corroded.
Bought replacement part, exact fit. 2 screws out, 2 screws in EASY PEEZY. Hardest part was finding my 3/8 socket and waiting for the part which came way faster then expected. This is 2nd time APP saved me. Last time was for a 37 dollar relay that my appliance guy told me was my compressor. He told me to buy a new fridge because he wasn't going to replace the compressor. That was 3 years ago, :) Read more
Aluminum strap secures the defrost heater against the evaporator coil. Replace if broken, cracked, or missing to maintain proper heater contact.
Removed the freezer shelves and back panel, evaporator coils were frozen with ice. Defrosted coil and removed defrost heater connectors, measured no continuity in the heater and ordered a replacement. Also discovered the aluminum retention strap was broken and the heater had slipped down in it's position, ordered and replacement strap. Re-installed new heater and strap per the video instructions, repair complete. Most difficult steps were drilling out the drain pan rivet and re-threading... Read more
Covers the service opening on your refrigerator. Replace if cracked, broken, or missing to protect internal components and maintain a clean appearance.
I ordered the parts needed from you and they arrived quicker than promised. your chat person was extremely helpful in finding the correct parts needed. Great service Read more
Covers the factory test opening on your refrigerator cabinet or liner. Replace if missing, cracked, or damaged to restore a finished look and seal.
Color: White
Using the make and model of the refrigerator, I did some research on the internet to find a detailed diagram of the door. I then found AppliancePartsPros.com. Since the diagram was somewhat difficult to see clearly, the representative I spoke with on the phone went the extra mile to be sure I ordered the correct parts. Read more
Exterior door handle for refrigerators and freezers. Mounts to front of appliance door for ergonomic grip. Replace if cracked, broken, or loose.
Put it on and tightened it quick and easy. Read more
Seals internal refrigerator components to prevent air leaks and moisture intrusion. Replace when worn to maintain proper airflow and temperature control.
Replace a cracked, broken, or missing refrigerator shelf to restore storage capacity. Provides a flat, sturdy surface for organizing food and containers.
Channels water from the valve to the dispenser and ice maker. Replace if cracked, kinked, or clogged to restore flow and prevent leaks at the cabinet.
The Wiring Harness is an OEM part for Frigidaire refrigerators. As the complex network distributes power throughout the cabinet, this harness is crucial for seamless communication between electrical parts. Its bundled cables provide synchronized functioning of all refrigerator operations.
Symptoms of a faulty wiring harness can include:
Causes involve normal insulation breakdown from years of vibration, heat cycling, and flexing stress. Rodent damage or pinched/cut wires may also disrupt circuits.
Replace it with this genuine Frigidaire harness to restore a consolidated and durable part, avoiding further diagnostics and piecemeal replacements down the line. Compatible with some Electrolux, Gibson, and Kenmore models.
I removed the cardboard cover on the back of the fridge with a 1/4 inch nut driver. I disconnected all of the wire harness connections. There were a total of 6 or 7. I removed the bolts on the compressor so I could access the ground wires behind the compressor. I removed the ground wires behind the compressor as well as the ones in front of the compressor. I installed the new power harnesss. The connections were easy to do since you can only hook them up one way and they are color coded. I... Read more
Specs: 1.40`` long
Supports and aligns the refrigerator door at the bottom pivot point. Replace if bent, cracked, or worn to restore proper door alignment and movement.
Emptied the door, removed the top door hinge plate, removed the door, then removed the damaged lower hinge plate and bushing, and then replaced them with the new parts. Everything went back together just fine, and now the door closes properly, and stays closed! Thanks!! Read more
If your crushed ice comes out in large chunks or clumps, this fixed blade may be worn or broken. Works with the auger to deliver consistent crushed ice.
Spacer that fits between refrigerator door hinge components to maintain proper clearance and alignment. Replace if worn, cracked, or missing.
Fix no water from dispenser or slow ice production with this refrigerator water inlet tube. Routes water from valve to dispenser and ice maker assembly.
Positions the condenser fan and motor in the rear machine compartment. Replace if cracked, warped, or damaged to restore proper airflow direction.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.