Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Burner won't light or flame is weak? This gas valve controls flow to your range surface burner for reliable ignition and heat control. Moderate DIY.
Replaced the old valve with a new one from AppliancePartsPros.com. I watched one of the YouTube videos to get an idea of what the process would entail. I gathered the tools I would require, plus a work light. The repair/replacement went pretty good. One thing the video I watched didn't cover was adjusting the valve for a propane system. I compared my old valve to the new one and saw that I would have to screw down the oven gas outlet until it "bottomed out". Read more
Replace this ignitor orifice assembly if the electrode is cracked, broken, or worn. Installs on gas range surface burners to restore spark ignition.
Installed a new ignitor/orifice assembly. Read more
Leveling leg assembly installs at the front corners of your range. Replace if broken, rusted, missing, or no longer adjusts to level your appliance.
Bought new leveling leg. Took longer to lay the appliance on the side and pick back up, than to install leg. Read more
Replacement oven door handle for gas ranges. Installs on the front of the oven door for opening and closing. Replace if cracked, broken, or worn from use.
It was a very simple fix - removed two screws (one from each end of the handle). I then held the new handle in place and replaced the two screws. Read more
Replaces a cracked, corroded, or damaged burner on your gas range or cooktop. Installs on top to restore the heat source for your cooking zone.
Replaced burner with new. Did the trick. Works like new. Read more
This decorative cap covers the end of the vent grille that allows hot air to escape from the oven door area. Located at the top front of the range door, replacement is needed when the cap is damaged, missing, or discolored from heat exposure.
I had to order the glass, frame, and cap that the handle attaches to. I just had to put in about 6 screws, it was very simple. Read more
Replace your range oven door gasket to prevent heat escape and maintain proper temperature. Snaps into place with embedded clips. Confirm fit by model.
Easy just pull clip and put back Read more
This surface burner ignitor/orifice assembly directs gas through a calibrated orifice and provides the spark to ignite it. Replacing a worn or damaged assembly restores consistent lighting and an even flame on the affected rangetop burner.
I replaced the Ignitor/Orifice Tube assembly. Read more
Burner orifice regulates gas flow to your range burners. Replace if clogged with debris, corroded, or damaged to restore proper combustion and heat output.
Found the parts I needed ordered them from your site Received them and installed in a few minuets and was done Read more
Burner won't light or takes multiple attempts? This gas range igniter provides reliable spark to ignite your burner. DIY-friendly fix restores consistent starts.
Replaced all ignitors. Read more
Frames your range's ventilation opening. Replace if cracked, discolored, or missing. Installs around vent area for a finished appearance.
Had to order new plastic panel, scared to run the clean cycle again. Read more
Replacement burner head for gas ranges and cooktops. Mounts over the orifice to distribute flame evenly. Needed when original is cracked or damaged.
Anti-tip bracket kit secures your range to the floor or wall, preventing tipping when the oven door is opened or heavy cookware is placed on extended racks.
Installed the new bracket as per instructions with template enclosed and it was perfect. Read more
Replacement surface burner head for gas ranges and cooktops. Distributes gas through precision ports for even flame. Needed when original is clogged, damaged, or corroded.
Conversion kit said put propane orifice .109 in to correct the problem but I had to use the .102 orifice. Read more
Burner cap sits atop the gas burner base to distribute flame evenly. Replace if cracked, warped, discolored, or missing to restore proper heat distribution.
Found web site. Called the 800 number. Placed the order. 2 days later, they were at my door. Read more
Burner won't spark or click when you turn the knob? This igniter wiring harness restores the electrical connection between switch and igniter. 30-minute DIY fix.
My husband and myself didn't agree on which part was the exact problem. He felt it was the valve. I felt it was the ignitor/ orifice. And we both agreed the Harness-Ignitor needed to be replaced. So we ordered all 3, and I'm not sure if in fact all three were needed or not, but now with those parts replaced, the range is working like brand new!! Thanks to all the videos and diagrams on the website we were able to fix it ourselves easily. And the price was cheaper then other websites, also it... Read more