Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a dispenser that won't shut off or won't respond when you press the lever. This control module reads paddle inputs and coordinates ice/water flow.
Ordered replacement part and changed it out myself. Was pretty simple except for the fact that I could not get the trim ring around the dispenser unit entirely off the door. I was able to start at the top and pull it out enough to change part, but was afraid to pull too hard on it for full removal thinking it could break. Unscrew part from door, disconnect wire harness to part, remove, re-connect new part and re-install. Read more
Dispenser cover broken or cracked? This protective trim snaps into place over dispenser components. Simple DIY repair—tabs pop off with gentle prying.
Replaced the Module-Dispenser. Read more
Specs: Hex head ,1/4-20 x 5/8
My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more
Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.
This is a support bar that reinforces and stabilizes a drawer or door shelf inside the refrigerator. It helps keep the drawer properly aligned on its tracks and prevents sagging under the weight of stored items. Replace this part if the drawer tilts, slides unevenly, or if the original support bar is cracked or broken.
Perfect Read more
Routes water from inlet valve to dispenser and ice maker. Replace if tube is cracked, leaking, kinked, or damaged to restore proper water routing.
The online video to change the water tube from the solenoid to filter was very helpful. It made the project straightforward. I had to replace the water tank tube as well. It was more challenging because there was no video for my model refrigerator (Frigidaire French Door) but a side-by-side unit video provided enough hints. The hardest part was getting the tube into the tank housing. The original water tank was smaller than the replacement. It required some serious persuasion to squeeze... Read more
Aluminum strap secures the defrost heater against the evaporator coil. Replace if broken, cracked, or missing to maintain proper heater contact.
Removed the freezer shelves and back panel, evaporator coils were frozen with ice. Defrosted coil and removed defrost heater connectors, measured no continuity in the heater and ordered a replacement. Also discovered the aluminum retention strap was broken and the heater had slipped down in it's position, ordered and replacement strap. Re-installed new heater and strap per the video instructions, repair complete. Most difficult steps were drilling out the drain pan rivet and re-threading... Read more
A light socket that holds the bulb in your refrigerator's freezer compartment. This electrical component provides power to illuminate the freezer interior when the door opens. Replace it when the freezer light won't turn on, flickers, or the bulb won't stay securely in place.
Interior light won't turn on when door opens? This push-button door switch restores automatic lighting. Moderate DIY repair with basic tools.
Positions the condenser fan and motor in the rear machine compartment. Replace if cracked, warped, or damaged to restore proper airflow direction.
This is a stainless steel door handle designed to mount on the exterior of the refrigerator or freezer door, providing a grip for opening and closing. It attaches with mounting studs or screws that thread into the door. Replace this handle if it is loose, cracked, discolored, or if the mounting points have broken, making the door difficult to open.
As easy as 1, 2, 3. Too simple to fix. Just screw in the screws. Read more
Color: White
Using the make and model of the refrigerator, I did some research on the internet to find a detailed diagram of the door. I then found AppliancePartsPros.com. Since the diagram was somewhat difficult to see clearly, the representative I spoke with on the phone went the extra mile to be sure I ordered the correct parts. Read more
Channels defrost water from the evaporator to the rear drain pan. Replace this tube if it's cracked, clogged, missing, or has become brittle over time.
Simply pushed the parts in place. Read more
Replacement screw secures door handles, brackets, panels, and trim to refrigerator mounting points. Install when hardware is missing, stripped, or loose.
Had to buy a new handle. Very easy to install. The part was delivered in one day. Read more
This small permanent magnet is used in supported refrigerator assemblies to actuate a mating reed switch or metal keeper. It helps the appliance recognize a closed position or hold a light cover/door closed for proper operation. What it does:
Refrigerator not cooling or showing error codes? This main control board coordinates the compressor, fans, and defrost cycle. Moderate DIY difficulty.
Replaced the main circuit board Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.