Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement silverware basket for dishwashers. Holds flatware during wash cycles. Order if your basket is cracked, broken, has holes, or is missing.
Replaced racks, Read more
The Rack Assembly is an OEM component for Frigidaire dishwashers. As the foundation component, the rack assembly provides a sturdy platform to hold dishes in place throughout cleaning cycles. It works seamlessly with adjustable shelf configurations.
Replaced upper rack (it comes with wheel assembly). The only tricky part was removing spray bar from old rack. Read more
Replacement spring and cable assembly for dishwasher doors. Balances door opening and closing. Needed when cable breaks, spring snaps, or door drops.
The door cables attach to springs that help the user open/close the dishwasher door. I attached the new door cables to the springs then attached springs to the intended mounting locations on the door. However, the new cables were shorter than the originals. This created enough tension in the springs to cause the door to close by itself. I was forced to change the springs' mounting locations. Fortunately, I was able to attach the springs to cut-outs in the door that reduced spring tension. ... Read more
Soap dispenser door won't open or latch is broken? This detergent dispenser assembly fixes dispensing failures. DIY repair takes 10-15 minutes.
This was a pretty easy fix. Removed the screws around the perimeter of the inside cover of the door and pressed the outer door cover upward to release it from slots retaining it. There are four wires to remove (2 for the detergent door release and 2 for the rinse agent release). Removed the 6 screws retaining the dispenser assembly and inserted the new one. Reassembly is simply in reverse order. Problem solved for less than the cost of a service technician's call! Read more
The Side Mount Kit is an OEM replacement part for Frigidaire dishwashers. It contains mounting brackets, screws, and other hardware required to securely install the dishwasher against cabinetry in a side-by-side configuration. Proper attachment is nece
Installed this part Read more
The Rack Assembly is an OEM part for Frigidaire dishwashers. This assembly provides a stable and organized space for placing dishes, glasses, and utensils during the dishwashing cycle.
Causes of a bad rack assembly can include rust or cor
Replacement wheel assembly for dishwasher racks. Snaps onto lower or upper rack to restore smooth gliding. Needed when wheels are broken, cracked, or missing.
Dishwasher not filling with water or leaking? The water inlet valve controls water flow into the tub. Common DIY repair—moderately easy to replace.
I would open door after initial fill and noticed little or no water. I also could not hear water flowing from control valve. I replaced the water control valve and issue resolved Read more
Replace your dishwasher door gasket to stop leaks and restore a tight seal. Fits between the door and tub to prevent water leakage. Confirm fit by model.
The gasket is fairly straightforward: it's just a press-fit right in to the channel. What you need to know is that you need to stretch the gasket material lengthwise prior to installation; if you don't it will be too short. The problem is that the bottom seal is not included with this gasket kit. The bottom seal begins to loosen at the corners and then begins to allow water past the door. The only way the bottom seal is sold is as part of the inner door assembly, which is costly. I removed... Read more
This seal kit restores a tight, insulated barrier around a window air conditioner. Replacing worn or missing seals helps block gaps and drafts, reduce noise and vibration, and maintain efficient cooling performance.
This spray arm assembly distributes high-pressure wash water inside the dishwasher and spins to cover the racks. Replacing a cracked or clogged arm restores proper spray coverage for cleaner dishes and consistent wash performance. What it does:
Fix a dishwasher that won't drain or leaves standing water. This drain pump assembly removes water at cycle end. Moderate DIY repair, 30-45 minutes.
Ordered a new pump and installed, took about 15 min. Reinstalled the dishwasher and tested still not draining. Disassembled and checked for pump power and found no problem. Removed drain hose from pump housing and found a blockage cleaned out blockage and hooked up the shop vac to drain hose under sink and made sure it was clean. Reassemble and reinstall with old pump, works great! Guess I now have a spare pump in stock. Read more
Fix a dishwasher that won't start when the door is closed. This door latch assembly engages the closure mechanism so your unit recognizes the door is secure.
Surfed the web, got advice, ordered the part, shut-off the electric power, disassembled back panel of door, removed wires for old switch and installed onto new electric door latch. Reassembled door panel - it is a little tricky, need some patience to get it all together, but it does go easily. Read more
Creates a water seal in the drain path to prevent backflow and odors. Replace if cracked, clogged with detergent buildup, or deformed to restore drainage.
Replaced trap Read more
The Mounting Bracket is an OEM part for Frigidaire dishwashers. It is a metal component that secures the dishwasher to the surrounding cabinetry. The mounting bracket provides structural support and stability during operation.
Causes of a bad m
Fixes dishes not drying or coming out cold after the cycle. This heating element restores proper water heating and drying. Moderate DIY repair.