Fgid24466qf Parts

The Rear O-Ring is an OEM part for Frigidaire dishwashers. This small but crucial component ensures a watertight seal within the dishwasher's internal systems, preventing leaks by sealing connections between various parts, such as the pump or valve assemblies. The front O-ring is part number AP2109102

Causes of a bad rear O-ring can include regular wear and tear, drying out or cracking due to age, and damage from chemical exposure or improper installation. A compromised O-ring can lead to water leaks and reduced efficiency of the dishwasher.

Symptoms of a bad rear O-ring include:

• Water leaking from the dishwasher
• Puddles forming underneath the appliance
• Reduced washing performance due to water pressure loss
• Noticeable wear, cracks, or deformation on the O-ring

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Pressure Sensor is an OEM part for Frigidaire dishwashers. It monitors the water pressure within the dishwasher to ensure optimal performance during the wash cycle.

Causes of a bad pressure sensor can include electrical faults, buildup of debris or mineral deposits, or general wear and tear from regular use.

Symptoms of a bad pressure sensor include:

• Poor cleaning performance
• Dishwasher not filling with water properly
• Error codes related to water pressure
• Dishwasher stopping mid-cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Thermostat is an OEM part for Frigidaire dishwashers. It plays a critical role in regulating the temperature of the dishwasher during the wash and rinse cycles, ensuring optimal cleaning and drying performance.

Causes of a bad thermostat can include electrical malfunctions, wear and tear over time, or damage due to power surges or water exposure. A faulty thermostat can disrupt the normal operation of the dishwasher, leading to inefficient washing and potential damage to dishes.

Symptoms of a bad thermostat include:

• Dishes not drying properly
• Dishwasher not heating water correctly
• Error codes related to temperature issues
• Dishwasher stopping mid-cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Circulation Motor is an original and genuine OEM replacement part for Frigidaire dishwashers. It circulates water throughout the wash and rinse cycles to clean all dishes.

Causes of a bad circulation motor include normal wear and tear over time, the mineral buildup that causes mechanical issues, or damage from overfilling the dishwasher with an unbalanced load.

Symptoms of a bad circulation motor are:

• Dishes only partially cleaned with dirt and food soils still stuck on
• Incomplete water coverage inside the dishwasher tub
• Puddles of standing water after a cycle
• Abnormally long cycle times

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Westinghouse, and some Kenmore dishwasher models.

The Roller Assembly is an OEM part for Frigidaire dishwashers. This part ensures that the dishwasher racks glide smoothly in and out, providing easy access to dishes and utensils during loading and unloading.  

Causes of a bad roller assembly can include regular wear and tear from frequent use, damage from overloading the racks, or exposure to harsh dishwasher detergents and high temperatures.

Symptoms of a bad roller assembly include:

• Difficulty sliding the racks in and out
• The rack falling off the track
• Unusual noises when moving the racks
• Visible wear, cracks, or missing rollers

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This dishwasher rack tine row bracket secures the fold-down tine row to the rack so it pivots and locks correctly. Replacing a cracked or missing bracket helps restore stable plate support and smooth loading.

• Secures the fold-down tine row to the dishrack
• Allows the tine row to pivot between upright and flat positions
• Helps keep dishes from tipping during cycles
• Common symptoms: tines won't stay up, row flops loosely, bracket is cracked/missing

• Disconnect power to the dishwasher before servicing
• Pull out the rack and locate the affected fold-down tine row
• Release the old bracket and snap the new bracket onto the rack wires
• Verify the tine row pivots and latches smoothly before returning the rack

The Water Valve is an OEM part for Frigidaire dishwashers. It is responsible for controlling the flow of water into the dishwasher, ensuring the correct amount of water is used during each cycle.

Causes of a bad valve can include mineral buildup, wear and tear over time, or damage from high water pressure or freezing temperatures.  

Symptoms of a bad valve include:

• Dishwasher not filling with water
• Water leaking from the valve area
• Irregular water levels during cycles
• Delayed or incomplete wash cycles

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Lower Spray Arm is an OEM component specifically designed for Bosch dishwashers. It spreads cleaning water and detergent beneath dishes on lower racks and shelves. 

Uniform coverage is provided through the spinning spray of multiple strategically placed nozzles. Dedicated lower basket washing power tackles tough soils.

Causes of spray arm malfunction can include clogs from food debris accumulations over time. Impeller damage from hard impacts inside the wash chamber is also possible.

Symptoms of a defective lower spray arm include: 

• Poor or ineffective cleaning on lower racks and surfaces
• Dried-on food remaining in hard-to-reach crevices below  
• Noticeable decreases in water pressure impacting lower wash

This OEM Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models sharing uniform wash architectures. Replacement ensures balanced upper and lower cleaning performance.
 

The Orbital Sprayer is an OEM part for Frigidaire dishwashers. It is a moving component located near the spray arms that functions to provide an added level of spray coverage during washing cycles. The precision-designed spray nozzles work with water pressure fluctuations to deliver effective spray coverage to all dishes. 

Symptoms of a bad orbital sprayer include:

• Inconsistent or uneven spray pattern within the dishwasher
• Dirt or debris buildup not being removed from certain areas 
• Caking or spotting left on dishes
• Abnormal sounds or vibrations coming from the spray arms

Causes of failure can be mineral or limescale buildup clogging nozzles, wear of wash jets over time, or damage to spray arm bearings that prevent proper rotation.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This genuine replacement support holds and stabilizes its matching component so it sits level and stays securely in place. Replacing a worn or broken support restores proper alignment and reliable operation of the affected assembly.

• Provides structural support and alignment for the mating part
• Prevents wobble, sagging, or unwanted movement
• Common symptoms: cracked/broken support, loose fit, part not staying seated or falling out
• May cause rattling, misalignment, or uneven performance of the assembly

• Disconnect power to the appliance; allow hot surfaces to cool before servicing
• Note the original orientation/location and transfer any reusable hardware from the old part
• Install the new support fully seated; do not overtighten fasteners into plastic
• Test fitment and operation before reassembly

The Dishwasher Control Panel is an OEM part for Frigidaire dishwashers. It contains the buttons and touchpad that allow for cycle selection, temperature adjustment, and other feature control.

Over time, the control panel can experience issues like non-responsive buttons due to normal wear on electronic components or moisture damage. Physical impacts are also known to potentially compromise its function.

Causes of a bad control panel include:

• Unintentional water intrusion degrading internal circuits
• Repeated impacts like those from a dropped object
• Breakdown of touch sensitive surfaces

Symptoms of a bad dishwasher control panel include:

• Stuck or unresponsive buttons
• Inability to select desired cycles
• Failure to display selected options
• Touchpad no longer reacting to input

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
 

The Dishwasher Control Board is an OEM part for Frigidaire dishwashers. It is the central component responsible for operating and controlling all functions of the dishwasher. 

Causes of a bad control board can include moisture damage, short circuits, or normal aging of electronic parts over time. 

Symptoms of a bad control board include:

• The dishwasher not starting or functioning properly
• Lights flashing in unintended patterns  
• Inability to select desired wash cycles
• Issues with dispensing detergent or rinse aid

This OEM Frigidaire replacement control board provides genuine functionality and performance. It is also compatible with some Electrolux, Gibson, and Kenmore dishwashers.

This replacement seal restores a tight barrier between mating parts in your appliance, helping contain air, moisture, or fluid so the unit operates efficiently and reliably over time.

• Provides a compressible barrier between components to prevent escaping air or liquids
• Helps maintain proper performance when the original seal is worn or deformed
• Common symptoms include poor sealing, seepage around a joint, or visible cracks/flattening
• Replace if cut, brittle, misshapen, or no longer seats securely

• Disconnect power; shut off water or gas supply before servicing
• Note the seal's orientation and seating depth before removal
• Clean mating surfaces and grooves; avoid sharp tools that could damage the new seal
• Seat the new seal evenly all the way around; reassemble and test for a proper seal

This float detects and monitors water levels in the appliance's sump/drain area to help prevent overfilling and water pooling. Replacing a damaged or stuck float restores proper water sensing and reduces leak risk. What it does:

• Senses water level in the drain pan or sump so the appliance can stop or redirect water flow
• Helps prevent water from overflowing or pooling under the appliance
• Can stop false fill/overfill conditions caused by a stuck or broken float
• Fault symptoms include water pooling, continuous or unexplained filling, or failure to drain properly

• Always unplug the appliance before accessing internal panels or service areas
• Remove the required access panels or trim to reach the sump/drain area; follow the model's service manual
• Handle the float and any clips or wiring carefully to avoid damage; reconnect any electrical connectors securely
• After installation, restore power and run a manual fill/drain test to verify proper operation

The Console Assembly is an OEM part for Frigidaire dishwashers. It includes the control panel and its housing, allowing users to select and monitor different wash cycles and settings. This assembly is integral to the operation of the dishwasher, providing both functionality and a user-friendly interface.

Replace the console assembly if it becomes damaged or malfunctioning due to wear and tear, exposure to moisture, or electrical issues. 

Symptoms of a bad console assembly include:

• Unresponsive or erratic buttons
• The display not lighting up or showing incorrect information
• Difficulty in selecting or changing wash cycles
• Cracks, discoloration, or other physical damage to the panel

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Sump Cover and Filter is an OEM part for Frigidaire dishwashers. Located inside the bottom of the tub, it seals off and protects the drainage sump where debris collects after each wash cycle. The attached mesh filter screens out particles that could otherwise clog drain lines.

Causes can involve mineral buildup that blocks the filter mesh over time, cracks in the plastic housing exposing the sump, or a missing or damaged filter that fails to trap solids.

Symptoms of a bad sump cover and filter include:

• Standing water inside the bottom of the dishwasher tub
• Reduced drainage or water removal after cycles complete
• Floating debris trapped near the drain pump area

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.