Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Dishwasher not filling with water or won't stop filling? The water inlet valve controls water flow into your dishwasher. DIY-friendly replacement part.
Installed part provided Read more
Replacement bracket that secures the fold-down fence to your dishwasher's upper or lower rack. Needed when original is broken, rusted, or missing.
Purchase new rack assembly, fences and brackets from Appliance Parts Pros. This was my first purchase from Appliance Parts Pros and was an excellent experience. Went to their web site. Put in my model number. Purchased these parts in which I received in two days. Put together fences. Problem solved. Read more
Dishwasher won't fill with water? A faulty water level float switch prevents proper filling. This switch assembly typically takes 15 minutes to replace.
Replacing the inlet valve solved the problem. The old valve was somehow clogged with white sediment. I probably could have taken it off and cleaned it out if I'd known, but replacing the valve was much easier. Took about half an hour to repair. Video walk through was extremely helpful. Great to have a working dishwasher again! Read more
The Switch Assembly is an OEM replacement part for Frigidaire dishwashers. It contains a touchpad and electronic controls that operate wash cycles and drying features. Causes of a faulty switch assembly can involve water exposure inside the door control area leading to circuitry corrosion over time. Symptoms of a bad switch assembly include:
This OEM Frigidaire replacement part is also compatible with dishwashers manufactured by Electrolux, Gibson, Kelvinator, and some Kenmore models.
Replaced switch pad Read more
A rubber mounting grommet that cushions and positions components to reduce vibration and wear, helping parts seat securely for reliable operation. What it does:
Replaced the upper spray arm tube with a new one. Also replaced delivery tube grommet and the delivery tube gasket. Now everything works fine and no more leaks. Read more
Secures the lower spray arm in place. Replace if tabs are broken, worn, or missing, causing the spray arm to detach or not lock down properly. Installs under filter.
Replace the sprayer in the middle of the dishwasher, the problem was the grommet on the back of it but it's not available individually. Read more
Bottom protective panel that installs beneath the dishwasher door. Replaces cracked, dented, broken, or missing kickplates from impact damage or wear.
Easy job, I screwed the parts to the dishwasher Read more
Replacement water inlet hose for dishwashers. Connects water supply to the tub. Replace if cracked, leaking, or damaged by pests or wear.
Replaced hose Read more
Seals the upper spray arm delivery tube connection in your dishwasher. Replace if water leaks from the spray arm mount or arm becomes loose. Verify fit.
Covers the gap beneath your dishwasher for a finished look. Replace if cracked, broken, or missing. Installs at base with screws (sold separately).
Replacement rail for dishwasher upper dishrack. Installs inside tub to guide rack sliding. Replace if cracked, bent, or causing rack to fall off track.
Replaced four rollers & slide. Read more
Seals the rear of your dishwasher's circulation pump to prevent leaks. Replace if you notice water pooling or dripping from the motor area.
I first thought the leak came from the pump assembly rear o ring. I was wrong. The water was leaking from the pump. The pump assembly was shipped in 1 1/2 days with 2 more o rings. I lubed the o rings with dish soap, they slid in perfectly. reinstalled the clamp and screws and was ready to reinstall the dishwasher. Worked great. Next time I will buy the pump the first time. Buying the o rings separately adds $$. Read more
The Front O-Ring is an OEM part for Frigidaire dishwashers. This component is essential for maintaining a watertight seal in the front areas of the dishwasher's internal systems, such as around the pump or valve connections. It prevents water leaks and ensures the efficient operation of the dishwasher. The rear O-ring is part number AP2109101
Causes of a bad front O-ring can include regular wear and tear, exposure to high temperatures, and chemical degradation from detergents and rinse aids. Over time, the O-ring may dry out, crack, or become deformed, leading to leaks and decreased performance.
Symptoms of a bad front O-ring include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Secures the kickplate toe panel at the bottom of your dishwasher. Replace if screw is stripped, missing, or damaged during kickplate removal or repairs.
Fix loud whining or grinding noises during wash cycles with this dishwasher circulation pump motor. DIY-friendly repair, typically 10-15 minutes.
I started looking at new dishwashers and was quickly disheartened with the cost of these simple machines. There's really not much to them and yet they're so much money for what they do. I popped off the pump and took a look at it and cleared some "gunk" and hair out but it didn't fix the issue. Jumped on AppliandPartsPros.com and ordered the pump on a Friday night and had the part in hand Tuesday night after work. Took about 10 minutes total (dishwasher out and back installed, literally in... Read more
Fix a dishwasher that stops mid-cycle, overheats, or won't heat water. This thermostat regulates temperature during wash cycles. Moderate DIY repair.
So I replaced the hi-temp thermostat and the problem is fixed. Read more