Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Flcg7522aw Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Washer Water Inlet Valve
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304515818

Washer not filling with water or won't stop filling? This water inlet valve controls water flow into your washer. Moderate DIY repair for most models.

Do-It-Yourself Stories from Customers like You Water inlet valve   Carl B. • Charmco , WV • February 16, 2026

Took off top lip of the washer Read more

More
$71.33

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Tub Suspension Rod
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304536279

Fix excessive shaking, banging, or off-balance errors caused by a broken suspension rod. This tub stabilizer absorbs movement during spin cycles.

Do-It-Yourself Stories from Customers like You Broken tub suspension on a 417 61712510 washer dryer combo.   Christopher S. • Kennewick , WA • January 24, 2024

AppliancePartsPros.com was able to provide me with the parts I needed for half the price of many other sites. Their simple to follow web pages and numbered diagrams were invaluable when assuring I was getting what I needed for the machine I had. Here's how the repair went: First lifted the top lid panel and lid up off the clips in front, reached in and disconnected the lid switch wiring and set aside Then, with a little help, I tilted the whole machine back to about a 45 degree angle. The... Read more

More
$29.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Dryer Gas Valve Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304524455

This gas valve assembly controls the flow of gas to the dryer's burner during the heating cycle. It contains solenoid coils that open the valve when the igniter reaches the proper temperature, allowing gas to flow and ignite. Replace this assembly if your dryer runs but does not heat, heats intermittently, or if the igniter glows but the gas does not ignite.

Do-It-Yourself Stories from Customers like You Dryer not heating   Randy H. • Williamsburg , KY • February 21, 2025

Replaced valve Read more

More
$173.49

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Dryer Motor Mounting Clamp
Genuine Frigidaire part
By: Frigidaire
Part Number: 134242400

Secures the dryer motor in proper position for stable operation. Replace if motor shifts, buzzes, or clamp strips out. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Buzzing noise when the motor was powered   Richard K. • Wilton , CT • April 22, 2024

Replace idler, motor mounting clamp and lock Read more

More
$15.34

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Laundry Center Door Handle
Genuine Frigidaire part
By: Frigidaire
Part Number: 131789400

White door handle for laundry center dryer door. Replaces cracked, loose, or missing handles. Restores secure grip for opening and closing the door.

Do-It-Yourself Stories from Customers like You Handle broke off.   Velma F. • Ravenna , OH • June 26, 2017

Ordered the handle from you and received it the next day. I was stunned to receive it that quick, but very satisfied with the response time. When I installed it, it fit perfect. Thank you for the quick response time. When needed will order from you again. Read more

More
$63.61

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Dryer Glow Bar Igniter
Genuine Frigidaire part
By: Frigidaire
Part Number: 137524000

Dryer not heating? A failed igniter won't light the gas burner. This glow-bar igniter heats up to ignite gas during each cycle. Moderate DIY repair.

More
$126.61

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Gasket
Genuine Frigidaire part
By: Frigidaire
Part Number: 137551901

This gasket is a sealing component used in select appliances. It fits between two mating parts to keep water or air where it belongs, helping prevent leaks and ensuring proper performance. What it does:

  • Forms a tight seal between components or housings
  • Helps prevent water drips, seepage, or air leaks at the joint
  • Maintains correct appliance performance by keeping moisture/airflow contained
  • Replace if the gasket is cracked, torn, flattened, or misshapen
  • Common signs include residue, moisture, or visible gaps around the seal
What's included:
  • 1 gasket
Install notes:
  • Disconnect power; turn off the water supply before servicing
  • Note the orientation of the old gasket prior to removal
  • Clean and dry the mating surfaces; remove any old gasket residue
  • Seat the new gasket evenly without stretching; reassemble and check for leaks or proper seal

Do-It-Yourself Stories from Customers like You They are 20 year old   Bruce A. • Folsom , CA • March 19, 2018

This was more maintenance than a fix. I replaced the door gasket and temp sensor on my dryer. Thought what the heck and it might work more efficiently. I also replaced the shocks on my front loading washer. That was a bit of a chore, but could not have done it without the video that showed how to replace them. The socket was the life saver. All is working just fine. Who knows maybe I'll get another 20 year out of them. Read more

More
$72.21

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Drum Baffle Screw (Vane)
Genuine Frigidaire part
By: Frigidaire
Part Number: 131302800

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

  • Fastens the drum baffle/lifter (vane) to the rotating drum
  • Helps maintain proper tumble and load turnover
  • Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
  • Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes
What's included: One screw
  • Disconnect power before servicing; shut off gas
  • Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
  • Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
  • Start all screws before final tightening to seat the baffle evenly

Do-It-Yourself Stories from Customers like You The pump hose had a tear in it and the water hoses were in bad shape   Steven V. • El Cerrito , CA • September 21, 2014

Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy Read more

More
$17.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Sensor
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304504885

This sensor monitors appliance conditions and relays a signal to the control so heating, cooling, or cycle functions occur at the right time. Replacing a failing sensor restores accurate feedback and more reliable operation.

  • Detects operating conditions and sends signals to the control board
  • Helps regulate heating/cooling output or cycle timing
  • Common symptoms of a failed sensor: erratic operation, incorrect readings, cycles that won't start/finish, or related error codes
  • Restores proper control feedback when the original is damaged or out of range
What's included: 1 sensor Install notes:
  • Disconnect power to the appliance before servicing
  • Access the sensor per your service manual; note wire colors/orientation and connector locks before removal
  • Transfer any mounting clips or brackets from the original if required
  • After installation, run diagnostics or verify resistance/continuity per the tech sheet to confirm proper operation

More
$59.60

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Laundry Center Drive Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304515831

Fix a washer that won't spin or agitate with this laundry center drive belt. Connects motor to drum for spinning and washing. Moderate DIY repair.

More
$48.34

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Suspension
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304536278

The Suspension is an OEM part for Frigidaire top-loading agitator washing machines. It refers to springs and vibration-dampening mounts underneath the wash tub. 

These components absorb mechanical stresses from unbalanced loads and support the heavy rotating assembly without added noise transfer to adjacent surfaces. Keeping tub components properly isolated is important for structural integrity over many years.

Symptoms of a worn suspension include: 

  • Visible movement and shaking of the entire machine on top of the unit  
  • Screeching or screeching noises when agitating heavy loads
  • Fastener screws backing out or washing tub no longer level

Replacing with Frigidaire OEM suspension parts renews shock absorption to maintain steady cycles and protect connected plumbing. This is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore top load models.
 

Do-It-Yourself Stories from Customers like You This double stack frigidaire washer was shaking and banging terribly 1 suspension was broken the others worn out 2 springs broken   Giampaolo F. • Lynnwood , WA • April 29, 2024

Since the machine had all 4 identical suspensions, it took me a while to find out it takes 2 different couple of suspensions for front and rear. This site was very helpful cross referencing their older and newer numbers and also had very decent prices compared to the competition. The repair was challenging because of the new springs tension while trying to push them over the top holes and lock them up with the respective blocks. Especially the rear ones had very little clearance with the above... Read more

More
$49.59

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Air Duct Seal
Genuine Frigidaire part
By: Frigidaire
Part Number: 131295200

This air duct seal creates a tight barrier between the dryer's lint housing and cabinet. Replacing a worn seal helps prevent air leaks, maintain proper airflow through the lint filter, and restore consistent drying performance.

  • Seals the air duct/lint housing to the front panel to direct airflow through the lint screen and drum
  • Helps maintain dryer efficiency and temperature control by preventing bypass air leaks
  • Common symptoms of a failed seal include longer dry times, weak exhaust airflow, excess lint inside the cabinet, or lint around the door opening
  • Replaces a deteriorated or missing seal to restore the intended air path
What's included: 1 air duct seal Install notes:
  • Disconnect power; shut off gas supply for gas models
  • Access the air duct by removing the lint screen and top/front panels as needed
  • Remove the old seal and any residue; clean mating surfaces before installing the new seal
  • Seat the duct evenly against the panel when reassembling to ensure a uniform seal

Do-It-Yourself Stories from Customers like You Grinding noise coming from stack unit dryer   Daniel B. • Hughesville , PA • August 22, 2023

Old, unused stack set. Washer was great, dryer was grinding. Started with the mounting bracket/bearing and the belt. The old ones were slightly beatup. Put it back together and the problem persisted. Found the real problem when I pulled apart the blower to get to the motor. The fan had broken fins that had jammed in the side of the blower housing, and the friction had melted through the outer wall of the fan. Got the blower housing from APP, got the fan from a competitors for $30 less. When it... Read more

More
$13.57

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Laundry Center Pulley Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304524493

Pulley assembly powers tub rotation during wash cycles. Replace if worn from use, damaged by broken belts, or rusted from water exposure. Confirm fit.

Do-It-Yourself Stories from Customers like You Grinding noise   Maxwell F. • Elyria , OH • March 06, 2026

After reading multiple forums and watching Youtube videos, I was positive my problem was a bad transmission. However after beginning the process of removing my transmission, I discovered the problem was the pulley. The geared grooves were worn and that was causing all the grinding noises. When I ordered the transmission from appliance pros, I actually got it the next day which was amazing. I ordered the pulley and that took a couple days but they had it and it was the exact one I needed. I am... Read more

More
$50.57

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Laundry Center Transmission
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304517318

If your washer won't agitate or spin properly, the transmission may have failed. This mechanical component engages the drum during wash and spin cycles.

More
$204.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Idler Spring (Dryer)
Genuine Frigidaire part
By: Frigidaire
Part Number: 3205241

Keep your dryer tumbling smoothly by restoring proper belt tension. This idler spring attaches to the idler arm and maintains tension on the drive belt so the drum turns reliably without slipping or squealing. What it does:

  • Applies constant tension to the idler pulley to keep the drive belt tight around the drum and motor
  • Helps resolve a drum that won't turn or tumbles intermittently
  • Addresses belt issues such as slipping off, appearing loose, or premature breakage from low tension
  • Can reduce squealing/chirping from the idler area caused by belt slip
What's included:
  • 1 idler spring
Install notes:
  • Disconnect power; for gas dryers, also shut off the gas supply
  • Access the idler assembly by removing the front or lower access panel per your model
  • Relieve belt tension, unhook the old spring from the idler arm/frame, and install the new spring in the same orientation and holes
  • Rotate the drum by hand to check smooth operation before reassembly

More
$61.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Laundry Center Leveling Leg
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304532058

Adjustable leveling leg that mounts underneath your laundry center to balance and stabilize the unit. Replace if cracked, bent, or missing threads.

More
$24.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google