Flcg7522aw Parts

The Nut is an OEM part for Frigidaire washers. It secures the washer's motor in place, ensuring stability and proper functioning during operation.

A bad nut can be caused by wear and tear, damage, or improper installation. Signs of a faulty nut include the motor becoming loose, excessive vibration during operation, or unusual noises coming from the washer.

Symptoms of a bad lock nut include:

• The motor becoming loose or shifting position 
• Excessive vibration or shaking of the washer
• Unusual noises coming from the washer

Replace your worn-out or damaged nut with this genuine OEM part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The User Interface Wiring Harness is an OEM part for Frigidaire laundry centers. It is responsible for connecting the user interface to the main control board, allowing for communication and control over the laundry center's various functions.

A bad user interface wiring harness can be caused by wear and tear, exposure to moisture, or damage from pests or rodents. Signs of a faulty wire harness include unresponsive buttons, error codes displayed on the control panel, or issues with the display or functionality of the laundry center.

Symptoms of a bad user interface wiring harness can include:

• Unresponsive buttons  
• Error codes displayed  
• Issues with the display  

Replace your worn-out or damaged user interface wiring harness with this genuine OEM part to restore your laundry center. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This is a Phillips pan head machine screw commonly used to secure panels and components in appliances. It provides a reliable, low-profile head for flush fastening and easy Phillips-driver installation. What it does:

• Fastens trim, panels, or internal components where a pan head screw is required
• Designed for secure grip in metal or threaded inserts compatible with #10-16 threads
• Helps prevent loosening from vibration when installed to correct torque
• Often used in refrigeration and major appliance assemblies in limited quantities

• One Phillips pan head screw (#10-16 x 5/8")

• Use the correct #2 Phillips driver and steady pressure to avoid cam-out or stripping
• Do not overtighten; stop when snug to avoid damaging threads or mating parts
• Replace only with an identical thread size and head style to ensure fit
• Wear safety glasses when working around sharp sheet metal and springs

No.8 pan head `10 - 10b x 0.50 `cr/sq drive

Self leveling leg pad

This cable tie secures wiring and small hoses to appliance frames and harnesses, keeping components organized and reducing wear from rubbing or vibration. It helps maintain safe routing so wires stay clear of moving or hot parts. What it does:

• Fastens wire bundles, harnesses, and small hoses to prevent movement
• Keeps wiring routed away from sharp edges and heat sources
• Reduces noise and wear caused by loose or vibrating wires
• Helps prevent chafing that can lead to insulation damage or intermittent connections

• Disconnect power before servicing electrical components
• Position ties to secure harnesses without over-tightening; trim excess tail
• Keep ties away from high-heat surfaces and moving parts
• Replace any damaged or brittle ties rather than reusing

This rubber lid bumper cushions the washer lid to prevent hard contact and reduce noise and wear. It replaces a worn or missing bumper to help the lid close more softly and sit level. What it does:

• Acts as a soft contact point between the lid and cabinet to absorb impact
• Reduces lid slamming, rattling, and vibration during operation
• Helps keep the lid aligned and prevents cosmetic damage to the rim
• Commonly replaced when the bumper is cracked, flattened, or missing

• One rubber lid bumper

• Install by removing the old bumper and pushing the new bumper into the mounting hole or recess; hand tools may be helpful
• Ensure the appliance is powered off and disconnected before servicing
• Inspect surrounding mounting area for damage and replace any broken retainers as needed
• If the bumper is hard to seat, warm it briefly with a hair dryer to improve flexibility

Replacement mounting screw that secures appliance panels, trim or brackets to restore proper fit and reduce rattles. A simple fastener that helps keep components stable for safe, quiet operation. What it does:

• Secures panels, trim pieces or internal brackets in place
• Replaces lost, stripped or damaged screws that cause loose parts
• Helps stop rattling, vibration or misaligned panels
• Restores proper alignment so doors and covers sit flush

• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten — snug until secure to prevent damage
• Disconnect power before working near electrical components
• Keep small parts away from children and pets

This is a replacement mounting bracket that secures appliance panels and components, restoring proper alignment and stability. A direct-fit part that helps stop loose panels, rattling, or misalignment for safe, reliable operation. What it does:

• Provides a secure attachment point for panels, trim, or internal components
• Restores correct alignment to reduce rattling and vibration
• Prevents parts from shifting or coming loose during operation
• Re-establishes proper fit where a worn or broken bracket allows gaps

• One mounting bracket

• Install with appliance powered off and disconnected from power source
• Use appropriate fasteners and torque to avoid stripping or damage
• Inspect surrounding clips and hardware; replace any damaged fasteners

This is a replacement mounting collar used to secure and align associated appliance components for proper fit and operation. It restores the original spacing and support where the factory collar is worn or damaged. What it does:

• Provides a secure mounting point to hold panels, assemblies, or shafts in correct alignment
• Helps prevent excess movement that can cause noise, vibration, or premature wear
• Restores proper spacing to prevent rubbing or binding of adjacent parts
• Useful when a cracked, deformed, or missing collar causes misalignment or rattling

• Always disconnect power to the appliance before beginning repairs to avoid shock or injury
• Inspect surrounding parts and mounting hardware; replace any damaged fasteners for a secure fit
• Hand-start fasteners to avoid cross-threading, then tighten to OEM torque if specified

This genuine OEM part is a washer lid. The washer lid is the main piece that covers the washer. Over time, a washer lid can become damaged to the point where it no longer closes securely. If the washer lid is no longer closing all the way or is severely cracked or damaged, it will need to be replaced.To replace this part, start by making sure the washer is unplugged. After it has been powered off, proceed to take a putty knife to lift to release the two retaining clips that secure the washer's main top. Once released, proceed to remove the lid lock assembly wire connector. Fully remove the main top and set it upside down. Release the tension on the lid springs and detach the springs from the main top and hinge bars. Using a Phillips head screwdriver, remove the screws that secure the hinge bars to the lid. Push the hinge bars through the bearings then twist the bars to remove them. This will separate the lid from the main top. Take the new lid and align it with the main top. Insert the hinge bar between the main top and bearing while threading the screws to secure the new top. Reinstall the top panel and connect the wire harness. This replacement part is sourced directly from the manufacturer and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand washers.

This is a replacement screw used to secure appliance panels and components. It provides a direct-fit fastener to restore secure mounting and proper alignment of parts after repair. What it does:

• Secures panels, brackets, trim, or small components to the appliance frame
• Restores proper alignment and prevents rattling or loose parts
• Helps maintain safe, stable operation when used in the intended mounting location
• Works as a direct replacement for the original fastener when the correct PN is specified

• Use the matching screw hole and thread engagement; do not force or cross-thread
• Tighten to snug fit—avoid over-tightening which can strip threads or crack plastic
• If replacing multiple fasteners, use identical part numbers for consistent fit
• Disconnect power and follow appliance safety guidelines before accessing internal parts

This is a flat metal washer used as a load-distributing spacer in appliance assemblies. It helps keep fasteners seated and reduces wear between mating parts for reliable mechanical fit and alignment. What it does

• Distributes load from a nut or bolt to prevent pull-through and improve joint stability
• Maintains proper spacing and alignment of assembled components
• Reduces friction and wear between parts that rotate or clamp together
• Helps prevent fasteners from loosening under vibration or movement

• One flat washer

• Inspect mating surfaces and replace any damaged hardware before installing the washer
• Use the washer with the specified bolt/nut size and torque per manufacturer guidance
• Wear safety glasses and disconnect power to the appliance if working near electrical components

This outer trim cover replaces a worn or damaged cosmetic panel to restore a clean appearance and protect underlying components from dirt and debris. It's a simple, direct replacement that keeps the appliance looking and functioning as intended. What it does:

• Covers and protects internal components and wiring from dust and spills
• Restores the appliance's finished appearance after damage or wear
• Helps maintain proper airflow/clearance around controls or openings
• Prevents accidental contact with underlying fasteners or edges

• One outer trim cover

• Disconnect power to the appliance before attempting any service
• Installation typically requires removal of adjacent trim or fasteners; retain all screws
• Handle cover edges carefully to avoid scratches; use soft cloth if needed
• If any clips or fasteners are damaged, replace them to ensure secure fit

The  Bracket assembly is an OEM replacement part for Frigidaire washing machines. This bracket assembly contains an arm that detects any out of balance vibrations in the washing tub during the spin cycle. If excess vibrations are sensed, the arm will trip an internal switch to stop the cycle and prevent potential damage.

Symptoms of a bad bracket include: 

• Inability to complete high-speed spin cycles
• Premature ending of the spin portion of cycles  
• Error codes related to tub imbalance
• Excessive shaking felt in the washer cabinet or surrounding floor area

Causes of failure can be worn or loose mounting points that reduce the arm's sensitivity over time. Constant back-and-forth movement also causes fatigue that impairs the bracket's balance detection capabilities.

This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Hex washer head ,10-32 x 0.375. Ground