Fmv176ntf Parts

A full stainless replacement door assembly that restores the exterior appearance and function of compatible Frigidaire refrigerators. Replaces dented, scratched, or damaged doors for a clean, factory-fit finish and proper closure. What it does:

• Replaces a damaged or bent refrigerator door to restore proper sealing and alignment
• Restores the appliance's exterior appearance when the original door is dented or cosmetically worn
• Helps maintain correct internal temperature by allowing full door closure
• Works with existing hinges and trim when compatible with the model

• Disconnect power and remove food before starting any door repair
• Doors are heavy and can be awkward to handle—use a second person or proper support
• Some models require transfer of hinges, gaskets, handles, or trim from the old door; verify included items before installation

This high-voltage diode rectifies AC to DC in the microwave's high-voltage circuit so the magnetron can generate heat. When it fails, the oven may run normally but won't heat or may blow fuses.

• Converts high-voltage AC to DC for magnetron operation
• Maintains correct polarity and protects the HV circuit
• Common failure symptoms: runs but no heat, loud hum then shutdown, blown internal fuse, or tripping breaker
• Visible burn or damage on the diode or leads may be present

• Disconnect power before servicing; high voltage is present even when unplugged
• Safely discharge the high-voltage capacitor before touching HV components
• Match orientation to the original—polarity matters; ensure tight, insulated connections

This replacement Grille Assembly restores a clean, secure front cover for your appliance's vent/intake area. It helps protect internal components and maintain proper airflow while returning the unit to a finished, like-new appearance.

• Covers and protects the vent/intake opening at the front of the unit
• Helps maintain correct airflow through the appliance
• Replaces a cracked, warped, or missing grille that won't stay secured
• Can reduce rattling or vibration noises from broken tabs or a loose fit
• Restores the factory look and fit

• Disconnect power before servicing.
• Remove mounting screws/clips and support the grille while releasing tabs.
• Reuse existing hardware; align tabs and position the new grille, then secure.
• Tighten screws snugly—do not overtighten—and confirm proper alignment and clearance.

This thermostat is a temperature-sensitive switch used in select appliances to regulate heat or provide over-temperature protection. Replacing a failed thermostat restores consistent temperature control and helps protect internal components from heat-related damage.

• Monitors temperature at its mounting point and opens/closes the circuit at a factory-set threshold
• Regulates heating cycles or functions as a high-limit safety cutoff (application-dependent)
• Failure open can cause no heat or premature shutdown
• Failure stuck closed can lead to overheating, erratic temperatures, or extended run times

• Disconnect power and allow the appliance to cool before servicing
• Note wire locations; transfer one lead at a time to the new thermostat
• Mount flush and secure to the mating surface/bracket for accurate sensing; ensure firm terminal connections
• After installation, run and observe an initial cycle to confirm normal operation

This replacement plate is a structural component used to secure and support adjoining parts inside the appliance. Installing a new plate restores proper alignment and a solid mounting surface so connected pieces fasten correctly and operate smoothly. What it does:

• Provides a rigid base for mounting brackets, hinges, latches, or related hardware
• Maintains alignment to help doors, panels, or assemblies close and seal properly
• Replaces plates bent, cracked, or corroded from wear, impact, or over-tightening
• Typical symptoms: loose components, misalignment or gaps, vibration/rattling, or difficulty securing screws

• 1 plate

• Disconnect power; shut off gas and/or water before servicing
• Support adjacent parts before removing fasteners to prevent drops or misalignment
• Transfer original screws, spacers, or clips from the old plate to the new one
• Start screws by hand and tighten evenly; avoid over-tightening to prevent distortion

This door latch hook secures the refrigerator door latch so the door closes and seals correctly. Replacing a broken or worn hook restores reliable door latching and helps prevent temperature loss from an improperly closed door. What it does:

• Secures the door latch assembly so the refrigerator door stays closed.
• Restores proper latch engagement to help maintain the door seal and consistent cooling when the door was not closing fully.
• Can address symptoms such as a door that won't latch, door popping open, or visible damage to the hook.
• Direct replacement for the factory latch hook to restore proper fit and function.

• Disconnect power to the appliance before starting any repair.
• Remove door trim or inner liner as needed to access the latch; keep all screws and fasteners for reassembly.
• Verify latch alignment and striker position before tightening; hand-tighten first and avoid over-tightening.

This replacement cover is a protective panel used in the microwave assembly. It shields internal components from grease and debris and restores a clean, secure barrier when the original cover is cracked, burned, or missing.

• Shields internal components from food splatter, steam, and grease
• Helps maintain proper airflow and safe operation inside the cavity
• Common signs it's needed: cover is warped, cracked, scorched, loose, or missing
• Reduces arcing/sparking or buzzing caused by a damaged or contaminated cover

• Disconnect power before servicing; allow hot surfaces to cool
• Remove screws or release tabs to take off the damaged cover; reuse existing hardware if applicable
• Clean surrounding area to remove grease or debris, then seat the new cover fully and secure without overtightening
• For microwaves, internal high voltage can remain even when unplugged.

This complete door assembly replaces a damaged or worn refrigerator door to restore proper closure and appearance. It provides a factory-style front panel so your appliance seals and functions correctly without drafts. What it does:

• Replaces the full outer door structure so the door closes flush and helps maintain internal temperature.
• Restores mounting points and handle attachment if the original door is dented, cracked, or warped.
• Helps stop cold air leaks and reduces frost buildup caused by a misaligned or damaged door.
• Returns the appliance to a finished, factory-look exterior when the existing door is cosmetically damaged.

• Disconnect power to the appliance and empty door shelves before starting.
• Have a second person available; door assemblies can be heavy and awkward to handle.
• Keep fasteners and hinges aligned during installation; follow the manufacturer's torque recommendations.

This Frame is an OEM part for Frigidaire microwaves. Designed to provide structural integrity and aesthetic appeal, this frame is a crucial component for the proper alignment and protection of the microwave's door and interface. 

The degradation of a microwave frame can occur due to physical impacts, frequent usage, material fatigue, or environmental factors. A compromised frame can affect the door alignment, sealing, and overall look of the microwave.

Symptoms of a bad frame include:

• Difficulty in opening or closing the microwave door.
• A visible gap or misalignment of the door.
• Cracks or breakages on the frame itself.
• Unusual noises when the door is in operation.
• The door not sealing properly, leading to heat loss or inefficient cooking.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This temperature control thermostat regulates refrigerator temperature to keep food safely chilled. It replaces a faulty control to restore proper cycling and temperature stability for the fresh food compartment. What it does:

• Senses cabinet temperature and opens/closes the compressor/coolant circuit to maintain set temperature
• Can stop excessive cooling or prevent the compressor from running continuously when failing
• Commonly used when the refrigerator is too warm, too cold, or runs nonstop
• Works with mechanical temperature dials and capillary-sensor assemblies on compatible units

• Disconnect power to the appliance before servicing to avoid shock
• Handle any attached capillary sensor tube gently; avoid kinks or sharp bends
• Verify correct mounting and electrical connections; match terminals to the old thermostat

The Magnetron is an OEM part for Frigidaire microwave ovens. Located behind the waveguide plate inside the microwave chamber, the magnetron generates electromagnetic waves to cook and heat food. Powered by a high-voltage transformer, a magnetron coil focuses 2.45GHz radio waves through the waveguide into the cavity.

Causes of a bad magnetron can include failures of the cathode filament or insulator over extended use, depletion of filament or high voltage components.

Symptoms of a bad Magnetron include:

• Slow or incomplete cooking even on high power 
• Discolored or burnt spots on food
• No visible arcing yet cavity runs continuously
• Oversparking sounds or burning smells from chamber

This genuine OEM Frigidaire magnetron is compatible with Electrolux, Gibson and some Kenmore microwave models as well.

This switch/fuse kit replaces a worn or failed control switch and associated fuse to restore reliable power control. It provides the exact components needed to address common start and power interruptions. What it does:

• Replaces a faulty control switch to restore on/off or cycle control
• Replaces the protective fuse to stop power loss from a blown fuse
• Helps resolve no-start, intermittent power, or control failures
• Restores proper electrical continuity for safe operation

• Disconnect power to the appliance before starting any work
• Handle electrical components carefully and avoid metal contact with terminals
• Verify correct part orientation and secure all connections per OEM guidance

This electronic control board manages oven functions and user commands, restoring reliable operation and cycle control for the appliance. Replaces a failed or unresponsive main control to return programming and display functionality. What it does:

• Receives input from the console and directs oven heating cycles and timers
• Controls temperature regulation and cycle sequencing for accurate operation
• Restores display and keypad responsiveness when the original board is faulty
• Stops error codes, intermittent operation, or complete loss of control when failing

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Handle the board carefully; avoid touching components and use anti-static precautions if available
• Some disassembly (console or back panel) and connector removal are required; keep fasteners and wires organized

A replacement unified-thread screw used to secure appliance panels and internal components. Provides a direct fastener to restore secure attachment when original screws are missing, damaged, or corroded. What it does:

• Fastens panels, brackets, trim pieces, and other appliance components that use a unified-thread screw.
• Restores secure mounting to reduce rattling, movement, or misalignment of parts.
• Replaces stripped, rusted, or missing screws to help maintain safe operation.
• Works where the appliance's service manual or parts diagram specifies a unified-thread fastening point.

• Disconnect power and water before servicing for safety.
• Use the correct screwdriver or bit to avoid stripping the head; install by hand until started, then snug—do not overtighten.
• Replace like-for-like: match thread type and length to the removed screw to ensure proper fit and function.
• If other fasteners show corrosion or damage, inspect nearby hardware and replace as needed.

This is a replacement refrigerator water filter cartridge that helps reduce taste and odor from your drinking water and ice for cleaner, better-tasting results. Ideal for refrigerators that use an inline/cartridge-style filter. What it does:

• Filters chlorine taste and odor to improve water and ice flavor
• Helps reduce common particulates and sediments from the water flow
• Restores normal water dispensing performance when the original filter is exhausted
• Commonly replaced when water tastes off, ice smells, or water flow is reduced

• Replace with the refrigerator powered off or water supply shut off when possible
• Follow refrigerator manufacturer instructions for proper seating, alignment, and filter reset
• Flush several gallons of water through the dispenser after installation to clear air and loose carbon fines
• Dispose of the used cartridge according to local regulations