Frigidaire Gltf2940fs1 Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 134548800
Adjustable leveling leg that screws into the washer cabinet to stabilize and level your appliance. Replace if broken, damaged, or missing to prevent rocking.
Do-It-Yourself Stories from Customers like You
Water leak under tub Hector D. • Lubbock , TX • December 07, 2014
After watching YouTube videos on possible cause, went to appliancepartspros and order seal and leveling legs since the had been missing since machne was given to us. Parts came in within the week and replaced . No more leaks!!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134370200
Fix a broken or missing detergent dispenser cover that's cracked or won't guide proper detergent placement. Simple 5-minute replacement repair.
Do-It-Yourself Stories from Customers like You
The washer's front drawer pull for the detergent and softener dispenser broke ! Paul F. • Chesterland , OH • December 22, 2017
After examining it, 2 of the 4 retainer clips had broken off. My wife grabbed her tablet, found Appliance Parts Pros website, saw 2 videos featuring our exact model of washer and ordered the 3 parts to replace broken and soon to fail parts !
Shipping was extremely fast !
Took out old assembly, replaced with new assembly in about 15-30 second, wife was happy, therefore I was happy !
Thx for being there !
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131302800
This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.
- Fastens the drum baffle/lifter (vane) to the rotating drum
- Helps maintain proper tumble and load turnover
- Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
- Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes
What's included: One screw
- Disconnect power before servicing; shut off gas
- Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
- Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
- Start all screws before final tightening to seat the baffle evenly
Do-It-Yourself Stories from Customers like You
The pump hose had a tear in it and the water hoses were in bad shape Steven V. • El Cerrito , CA • September 21, 2014
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137043000
Washer won't spin or makes loud whining noise? The drive motor powers drum rotation. Moderately difficult repair, takes 30-60 minutes. Video guide available.
Do-It-Yourself Stories from Customers like You
Motor was turning slow and after few minutes it quit. Leo H. • Slayton , MN • May 31, 2017
I watched videos on the website and took it apart. Put new motor on, also I put new belt even though the original belt was still ok, but I saw a little sign of shredding ...and there! !! It works like brand new washing machine. . Thanks to appliancepartspros.com...It made save a lot of money by doing it myself..
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006000
Washer won't start, shows error codes, or cycles randomly? The main control board manages all wash functions. Moderate DIY repair with careful handling.
Do-It-Yourself Stories from Customers like You
Frigidaire gltf2940fs2 front load washer e90 error code Wayne A. • Tewksbury , MA • August 01, 2016
After first doing a Google/YouTube search, There was only one "hit" on my search results. Next I went to an appliance message board forum but after almost a week and more than a dozen views, no response was received. This is unusual. I've been on this board before with positive results. They also changed the "rules" for DIYers which could explain why I didn't have a lot of response from the experts.
I attempted to get the unit into diagnostics mode. I was unable to clear the E90 "general...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134737300
Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Leaking hose. Sherry W. • Auburndale , FL • December 02, 2017
New hose and clamp.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134889600
Carries wastewater from your washer's drain pump to the standpipe or sink. Replace if cracked, kinked, clogged, or leaking to restore proper drainage.
Do-It-Yourself Stories from Customers like You
Odor and mold Joel S. • Derry , NH • January 26, 2016
Our washing machine door boot seal was getting moldy and causing odor problems. Cleaning tablets and bleach weren't helping so it was time to be replaced. While I had the top and front off I changed all the hoses that could be collecting soap scum and mold, all other wetted parts were removed and washed. The video on the door boot seal, and inlet valve assembly were extremely helpful in understanding how these parts are removed and reassembled. Although the door boot seal is the most visible...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134509600
Washer drum baffle mounts inside the tub to lift and tumble laundry. Replace if cracked, broken, or missing to prevent snags and restore quiet operation.
Do-It-Yourself Stories from Customers like You
Needed to replace drum baffle on washer Tim L. • Marinette , WI • February 22, 2015
Removed old baffle. Had to cut it out with a multi-purpose tool. Replaced with new one. Job was not too bad, and only took about 15-20 minutes.
The best part was the fast delivery time for the part. Ordered the PM of one day, and had it in the early morning of the next day. (OUTSTANDING!!!)
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134596200
Shipping bolt kit secures washer tub and suspension during transport. Install before moving to prevent internal damage, then remove before use.
Do-It-Yourself Stories from Customers like You
Needed a shipping support kit to prep for move of front load washer James R. • Saint Louis , MO • September 15, 2014
Ordered a shipping support kit from AppliancePartsPro.com, got it shipped next day, and installed the kit in less than 5 minutes to prep front loading washer for immediate moving.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134762000
Fix E32 error codes or washer stopping during fill with this water level pressure switch. Senses water level and controls fill cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Washer would stop after about 30 second on fill cycle diagnostic code of e32 Kenneth B. • Friendswood , TX • June 04, 2016
The E32 diagnostic code that the Frigidaire washer was throwing after a quick water fill attempt was not in the supplied Data Sheet that came with the washer and Frigidaire would not provide and updated Data Sheet because, "it's a liabiliity issue" was their statement, but they did tell me that the problem was in the Fill Pressure Sensor/Wire Harness or the Main Control Board (the display board). I ordered the Pressure Sensor and Main Control Board from AppliancePartsPros after checking...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131205300
This replacement screw secures appliance panels and components. With a #10-16 thread and 0.75-inch length, it replaces stripped, rusted, or missing hardware to restore a tight, rattle-free fit and reduce vibration and noise.
- Fastens cabinet panels, brackets, or internal parts in washers and dryers
- Direct replacement for worn or lost screws to keep assemblies aligned and secure
- Helps address loose/vibrating panels, rattling noises, or visible gaps/misalignment
- Spec: #10-16 thread; 0.75-inch length
What's included: 1 screw (10-16 x 0.75 in) Install notes:
- Disconnect power; for washers, also shut off water supply
- Match the original screw location; start threads by hand to prevent cross-threading
- Use a driver that fits the screw head properly; tighten snugly without overtightening
Do-It-Yourself Stories from Customers like You
Door hinge was wore out. Jerry K. • North. Judson , IN • November 19, 2018
Like the original.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131302901
Machine screw secures panels, brackets, and internal components in washers. Replace missing, rusted, or stripped screws to restore proper fit and alignment.
Do-It-Yourself Stories from Customers like You
Door hinge was wore out. Jerry K. • North. Judson , IN • November 19, 2018
Like the original.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134408400
Replacement mounting screw for washers and laundry centers. Secures components like pulleys, brackets, and panels. Replace if missing, stripped, or damaged.
Do-It-Yourself Stories from Customers like You
Nut on the pulley had come loose and worn out the pulley and the belt finally came off Brent Z. • Warren , OR • March 20, 2018
New parts ordered and installed. Hooked everything back up and she's running like a stealth bomber over North Korea.. completely silent
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134412400
This is a metal hinge that attaches the dryer door to the cabinet and allows it to swing open and closed. It supports the weight of the door and ensures proper alignment with the door latch. Replace this hinge if the dryer door is sagging, not closing properly, or if the hinge is cracked, bent, or has worn-out pin holes.
This part fixes the following symptoms
-
Lid or door won't close
-
Lid or door will not open
See more...
Do-It-Yourself Stories from Customers like You
Error code 41 Oh the beeping! Amy N. • Pike Road , AL • April 15, 2018
After reading up on the error codes, I found that my constant beeping was telling me that the door was not well latched. My machine is 12 years old and has seen heavy use, including a broken door handle that has been hanging on with copious amounts of duct tape for a while. I replaced the bent door hinge, worn door latch, and the outer handle. The entire repair required ten minutes and a Phillips head screwdriver. Now it works perfectly with NO more beeping!! Thank you AppliancePartsPros!!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304505407
The Cord is an OEM replacement part for Frigidaire washing machines. Extending from the rear of the unit, it safely powers the washer through a connection to a wall outlet.
Causes of cord failure are normal wear from frequent coiling and plugging/unplugging motions over the appliance's lifespan. Rodents or sharp edges may also damage the outer jacketing.
Signs of a bad cord include:
- Exposed or severed copper wiring visible inside
- External cracks, splits or abrasions eroding the casing
- Erratic behavior during the wash cycle
- GFCI/EGCI outlet tripping frequently
Compatible models also include Electrolux, KitchenAid, Jenn-Air, and Kenmore options. Maintaining safety is a top priority.
Do-It-Yourself Stories from Customers like You
Power cord broke Tristian W. • Johnstown , PA • June 25, 2016
Ordered a new power cord off this website
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131205100
Pan head mounting screw for dryers. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.
More