Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.
Walk into the kitchen on 21 Sep. Eight year old Frigidaire refrigerator appears to be short cycling, controls are nonfunctional. Unplug it for a few minutes, plug it back in, appears to return to normal function. Return to kitchen half hour 45 minutes later it's short cycling again. Panel has codes on it (S or 5 E CE, later that changes to S or 5 Y CE). Research of codes says replace main board and control board. Not sure where this main board is. 22 Sep call appliance repair. "Soonest... Read more
Fix refrigerator lights that won't turn on when door opens. This door light switch is a simple snap-in replacement. Easy 10-minute DIY repair.
Switch replacement was easy: -unplug fridge -using medium flathead, pry out old switch, starting from back, be gentle it's all plastic -when switch pops out, grab the wires and don't let them fall back into hold -there should be three wires -connect to new switch in same pattern -push new switch back in, being careful to orient it correctly while replacing the freezer switch, i noticed that one of the wires had loosened up and detacted from the old switch anyway, which was probably the actual... Read more
Spacer that maintains proper gap between fixed crusher blades in the ice bucket. Replace if broken, cracked, or missing to restore correct alignment.
Replaced "Ice Crusher Housing" and "Fixed Blades Spacer, both of which had broke. Read more
Insulated cardboard cover assembly that installs on the rear bottom of your refrigerator. Replaces a cracked, torn, or missing original cover.
Ordered all the parts I needed to finish off a Craigslist purchase that had some cosmetic and function items missing. Thanks for all the parts at great prices! Read more
Side rail that supports and guides your refrigerator's sliding freezer basket. Replace this hanger if cracked, broken, or worn to restore smooth sliding.
I was able to view the video then order parts on Appliancepartspros.com. Initially, I received the wrong part but we were able to resolve the issue quickly and I fixed my issue in 10 minute with the right part. Read more
Limits how far the refrigerator door swings open. Replace this stop if it's worn, broken, or missing to protect the hinge and prevent door overextension.
The plastic bearing broke after 7 years of too much opening and closing. Removing original bears were not real easy, however installing new ones were quick. It works well. The parts arrived really quickly. Read more
Ice won't dispense or grinds loudly? A bent or worn crusher blade is often the culprit. This blade fits inside the ice bucket assembly. Easy DIY fix.
This is the second time of needing repair. I remove the ice bucket, open the crusher, remove the 5 blades. Straighten the blades, reinstall. I then order new blades, The next time it happens I will install the new blades. The reason for the malfunction, (my guess), two ice cubes partially melted stick together and the size and angel the enter crusher cause the problem. I don't see it as the crusher problem or the blades being to weak. The ice container gets over full, opening and closing the... Read more
Replacement ice cream shelf that mounts above the ice bucket in your refrigerator. Replace if cracked, broken, or missing after an ice maker upgrade.
Replacing the ice maker fixed the issue. Because the ice maker was redesigned. I needed a new ice cream shelf. If your current ice maker has a power switch that is vertical, you will need a new ice cream shelf to make it fit correctly. The repair was very easy. All I had to do is loosen two screws on the ice maker mount and slide it out. Then disconnect the connector and install the new ice maker. It was probably the easiest repair I have ever done. Read more
Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.
I ordered online to AppliancePartPros.com for the fridge door hinge and after quick delivery I spent 15 minutes to securely fit the door back on the frig. I'm sure to do business again for parts if needed. Read more
Ice dispenser not working but ice is in the bin? The auger motor rotates the auger to feed ice through the chute. DIY-friendly repair in under an hour.
Replaced motor and new solenoid and yoke assembly, motor ran fine but Ice maker did not make Ice, water was turned on and the wire off and on latch was is the down position (on). Disconnected the water line from the Ice maker tray, ice had formed in the line while I was waiting for my parts (about 5 days), I would suggest disconnecting the water line at the feed end were your shut off valve is located and allow water to drain out of line. I had to remove Ice tray and submerge it pan of hot... Read more
Ice maker clicking or not producing ice? A worn drive gear with stripped teeth is often the cause. This 5-minute fix restores normal ice production.
Replaced the gear. Now it's making ice again. Perfect. Read more
Ice won't dispense or jams in crushed mode? This crusher blade fixes bent or broken blades in your ice bucket assembly. Easy DIY repair with video guide.
I ordered (3) new replacement blades and received them in two days! Read more
Secures the crisper slide rail to the refrigerator liner for smooth drawer operation. Replace if broken or missing to restore proper alignment and support.
Fix ice dispensing issues caused by bent or dull crusher blades. This blade restores smooth crushed-ice flow. Quick DIY replacement with video guide.
Fix a refrigerator that beeps continuously, won't dispense ice or water, or shows unresponsive controls by replacing the control board. Moderate DIY repair.
First, I will never, ever make the mistake of unscrewing anything on an appliance while it is still connected to power - what started as a cosmetic fix on the freezer door ended up costing me $340 to fix after I shorted out one of the boards for the dispenser. Replaced both the Ice dispenser power board and Ice dispenser control board. I tried to get information on how to test which of my boards had gone bad, since these are pricey parts, but could not find a reliable way to test. And since... Read more
Secures the crisper cover slide for smooth, aligned operation. Replace if broken or missing to restore proper drawer function. Confirm fit with your model.
Shelving went in without a problem. Very simple. Checked the installation video anyway in case there was a trick to not breaking something. Learned that the nylon clips needed to be transferred and found one missing on another shelf, so ordered a replacement. The water valve was one I replaced some time ago but one of the solenoids was bad, confirmed with a meter (ohm reading is between 200-500; less than 200 or more than 500 is broken). Replaced it without a problem (becoming expert at... Read more