Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Actuator arm installs inside the dispenser panel to engage the ice release mechanism. Replace if the plastic lever is cracked, broken, or missing a finger.
First, your company web site is extremely helpful. If anyone chooses to do it theirself the ordering process is efficient, quick and easy. Things not found at many companies these days. The last time I ordered from you I got the part in the delivery system within 24 hours, but not so this time. Still I receive this part within 3 days, What I would expect normally when ordering from the internet. I'll never use any other appliance site unless you change for the worse, the customers are the... Read more
Supports the refrigerator door for smooth opening and closing. Installs at the bottom hinge. Replace if cracked, broken, worn, or causing noise.
Removed door, pulled out old hinge bearing and replaced with new one. Read more
Specs: 10-16 X 0.500
No problem, 1 min to fix Read more
Adjustable hinge kit for refrigerator doors. Includes components to secure and adjust door hinges. Replace if worn, broken, or door won't seal properly.
Ordered the replacement parts and had them the next day! Very nice. Read more
Compressor clicks but won't start? Replace the start relay when your freezer stops cooling or the compressor shuts off after a few seconds. Quick fix.
First I have an LG French Door with a bottom freezer. It quit cooling. I went on line and watched some very informative You Tube videos. I trouble shot according to these videos. In these videos it shows that if there is a click coming off the compressor it has too meanings, the compressor is froze or the start relay is bad. I ohmed the compressor and had no open wires in the compressor. I then shook the relay and it was making noise. The videos stated that is there is a noise in the relay... Read more
Drip tray installs below the water and ice dispenser to catch spills and drips. Replace if cracked, broken, or tabs are damaged causing it to fall out.
So I ordered the face plate and other parts that went with it and fixed it myself. The repair man wanted around $600 to do it. I believe kt cost around $160 to fix it myself. Read more
Side-mounted bracket that supports and guides freezer baskets in refrigerator freezer compartments. Replace when cracked, broken, or missing to restore basket support.
Order the parts...!!! Read more
Water supply tube that routes water through your refrigerator to the ice maker and dispenser. Replace if cracked, leaking, or damaged during moving.
Changed the Frigidaire Icemaker Fill Tube Part # 241796405 (AP5671747) about a week ago and so far the Frigidaire Refrigerator seems to work fine. Did not use other ordered parts. Recently ice formed around internal evaporator fan and it started making loud noise when then fan and compressor, etc were running. A long winded history noted below if interested: I have been fighting with this Frigidaire Refrigerator for about 3 to 4 years, started out with the evaporator fan making noise when ice... Read more
Mounts to the freezer wall to support wire baskets. Replace if cracked, broken, or pulling away from the wall causing baskets to sag or fall out.
Lower freezer basket for side-by-side refrigerators. Installs at the bottom of the freezer compartment. Replace if cracked, broken, or missing.
Ordered parts on Monday, they arrived on Wednesday. Very very pleased. Read more
The Dispenser Cover Overlay is an OEM part for Frigidaire refrigerators. This part fits over the front of the dispenser, providing a protective and decorative cover for the control panel and dispenser mechanisms.
Causes of a bad dispenser cover overlay can include physical damage from impacts, wear and tear from frequent use, or fading and discoloration from prolonged exposure to sunlight and cleaning chemicals.
Symptoms of a bad dispenser cover overlay include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Replaces cracked, frozen, or leaking ice maker fill tube. Directs water from supply line into ice maker tray. Common replacement for damaged tubes.
Replaces cracked, leaking, or melted ice maker fill tube that carries water from the supply line to the ice mold. Installs in the freezer compartment.
I watched a similar fix on another refrigerator from the website videos and the fix took less than 5 minutes with no tools required. I really liked how their online chat service was able to find an appropriate replacement part as the original manufacturer has discontinued the part. I will definely use these guys again! Read more
Compressor won't start or rattles? This start relay enables the compressor to begin the refrigeration cycle. DIY-friendly repair, typically done in under an hour.
Looked up possible causes on line and found video about trouble shooting. It said to check starter cap and run relay on side of compressor. Removed both and found both were bad .ordered replacements on line from appliancePartspros.com. Installed new parts and is working properly. This repair job was on a 2012 Frigidaire refrig. You would think a refrig. Would last longer than 4 years. The original parts and the replacement parts were light weight and cheaply made. I'll probably be doing this... Read more
The Damper Assembly is an OEM part for Frigidaire refrigerators, crucial for regulating the airflow between the refrigerator and freezer compartments. This part plays a pivotal role in maintaining the desired temperature in your refrigerator, ensuring your food remains fresh and safe for consumption. Note: Damper Control w/ one switch, if you need a Damper Control with two switches, order part# AP3772850.
Causes of a bad Refrigerator Damper Assembly can involve normal wear of internal mechanisms responsible for damper rotation. Mineral accumulation on electronic sensors may hinder proper damper response.
Symptoms of a bad Damper Assembly include:
This genuine OEM Frigidaire is also compatible with Electrolux, Gibson, and select Kenmore models.
This issue was with a refrigerator that we acquired with a house we bought. The freezer was cold, making ice well, overall doing great. The refrigerator was not cold however. I had this issue with our own refrigerator in the past, and it was related to the defrost fan not working and the coils freezing up. However this refrigerator's coils had no ice buildup. Doing some searching on the internet I was able to narrow it down to the damper between the freezer and refrigerator not opening... Read more
Insulating foam that installs on the ice chute door to prevent warm air and moisture around the dispenser. Replace if compressed, cracked, or missing.
I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time. Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical... Read more