Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Collects water from evaporator defrost cycles. Mounts near compressor under refrigerator. Replace if cracked, leaking, or damaged to prevent odors.
Previously, I removed the lower rear cardboard back of the unit and saw the crack in the defrost pan. It was probably damaged when unit was moved using appliance hand truck. I looked up the part number AP4319611 in the exploded view diagrams of the unit. The part was ordered and delivered in a few short days. Emptied the unit and removed all shelves/glass to avoid damage since the unit must be tilted enough to reach under and remove two 1/4 inch hex screws. Tilted to the right side (facing... Read more
The Frigidaire Touch-Up Paint is white in color in a .6 fl oz bottle. For almond order 5303321320. For black order 5303321321.
The Touch Up Paint is an OEM part for Frigidaire appliances. Whether you're dealing with scratches, chips, or other minor cosmetic damage, this touch-up paint provides an easy and effective solution for maintaining the appearance of your appliance. It's designed to adhere well to metal surfaces, offering durability and resistance to further wear and tear.
Over time, appliances can accumulate minor surface damage from regular use, cleaning, and accidental impacts. Using the Touch Up Paint not only improves the aesthetic appeal of your appliance but also helps protect exposed areas from rust and corrosion, which can extend the life of the appliance.
Symptoms of needing Touch Up Paint include:
Quick touch up. The paint worked great. Packaged with a brush like nail poliish Read more
Loud noise or grinding from freezer? This evaporator fan motor circulates cold air in your refrigerator. Moderately easy DIY repair with basic tools.
REPLACED THE FREEZER EVAPORATOR MOTOR. PART WAS CORRECT ONE AND FIT GREAT! Read more
Secures the crisper slide rail to the refrigerator liner for smooth drawer operation. Replace if broken or missing to restore proper alignment and support.
Replace your refrigerator's water filter cup if cracked, leaking, or frozen. Protects the filter and prevents leaks. Verify fit with your model number.
Replaced cup & housing Read more
Supports and guides the refrigerator door as it pivots, reducing friction. Replace if cracked, worn, or causing metal shavings to restore smooth operation.
Discovered that the old part had broken, preventing the door from leveraging closed into the bearing valley. Metal-on-metal rubbing was also a clue. Pulled the old piece out of the hole (only the shaft remained) and popped in the new bearing. Took all of 10 minutes, and everything works great now. Read more
Ice won't dispense or jams in crushed mode? This crusher blade fixes bent or broken blades in your ice bucket assembly. Easy DIY repair with video guide.
This is the second time of needing repair. I remove the ice bucket, open the crusher, remove the 5 blades. Straighten the blades, reinstall. I then order new blades, The next time it happens I will install the new blades. The reason for the malfunction, (my guess), two ice cubes partially melted stick together and the size and angel the enter crusher cause the problem. I don't see it as the crusher problem or the blades being to weak. The ice container gets over full, opening and closing the... Read more
Ice maker clicking or not producing ice? A worn drive gear with stripped teeth is often the cause. This 5-minute fix restores normal ice production.
Replaced the gear. Now it's making ice again. Perfect. Read more
Ice dispenser not working but ice is in the bin? The auger motor rotates the auger to feed ice through the chute. DIY-friendly repair in under an hour.
Replaced motor and new solenoid and yoke assembly, motor ran fine but Ice maker did not make Ice, water was turned on and the wire off and on latch was is the down position (on). Disconnected the water line from the Ice maker tray, ice had formed in the line while I was waiting for my parts (about 5 days), I would suggest disconnecting the water line at the feed end were your shut off valve is located and allow water to drain out of line. I had to remove Ice tray and submerge it pan of hot... Read more
Fix water or ice dispenser not working with this 4-button control switch assembly. Common fix when buttons fail to respond or dispense incorrectly.
Replaced the four-button switch assembly. Read more
Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.
I ordered online to AppliancePartPros.com for the fridge door hinge and after quick delivery I spent 15 minutes to securely fit the door back on the frig. I'm sure to do business again for parts if needed. Read more
Hinge component that guides the cam for self-closing door action. Replace if cracked, broken, or worn to restore smooth door swing and proper alignment.
I replaced all parts on the bottom of the door to make it smooth to open. It was easy and took about 15 mins total. Read more
Fix ice maker overfilling, water spillage, or no ice production. Includes cover, fill cup, bail arm, and harness. Easy 5-10 minute DIY install.
Checked the internet to see what the recommended fix was based upon my model # and the problem I was having. I eventually ended up at the appliance parts pros websites video showing how to remove the ice maker and change it out with a new one. The appliance parts pros video was extremely helpful in the repair process! When I contacted appliance parts pros via chat on their website they quickly confirmed that this part would fit my model. So I ordered the replacement ice maker and kept my... Read more
Adjustable humidity control slider for refrigerator crisper drawer covers. Replaces cracked, broken, or missing controls to restore smooth vent operation.
This was a simple replacement of the crisper drawer and humidity control sliding switch; easy to snap into place and align with the tracks. Read more
Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.
Ordered parts and installed Read more
This roller assembly consists of small caster-style wheels mounted on a support ring, designed to allow a shelf, drawer, or internal component to slide smoothly inside the refrigerator or freezer compartment. It supports the weight of stored items while enabling easy access. Replace this assembly if the rollers are cracked, seized, or if the shelf or drawer no longer glides properly and feels stuck or wobbly.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.