Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures your dishwasher underneath the kitchen countertop. Replace if the bracket is cracked, broken, bent, or missing from installation.
Order parts from Appliance Parts Pros. Read more
If your dishwasher won't start or has no power, the control board fuse may be blown. This 4.1 amp fuse protects electronic components from overcurrent.
I had to remove the dishwasher about 6 inches then remove the door springs and remove the door. Next was to open the cover to reach the circuit board and remove it. The new board was put in and attached the plug. and put the door back together and reinstall the door and springs. Turned the power to check that the lights came on. After confirming I again had power, I turned the breaker off and reinstalled the dishwasher in the cabinet and restored power. Lastly I ran the machine to ensure that... Read more
Connects dishwasher door to spring mechanism to prevent door from dropping when opened. Replace if cable is broken, frayed, or detached from pulley.
My first thought was to take the dishwasher to the dump when I saw the pack rats ate the wiring while it was in storage. However, it was only a couple years old so just out of curiosity I looked at the appliance parts pros website and was pleasantly surprised that I could replace every wiring harness on my GE dishwasher for under $100. That is a lot of wire. The process to replace the wiring was nearly effortless. The new harnesses were identical to the old so all I had to do was find the 2... Read more
Creates a watertight seal around the dishwasher sump to prevent leaks. Replace if you notice water leaking underneath. Verify fit by model number.
Purchased your parts watched the awesome video on your site. Repair was complete within an hour the dishwasher is running as I am typing this. Thank you so much for the service you offer. Regards, Rich Read more
Replacement drain hose for dishwashers. Carries wastewater from the unit to your household drain. Needed when original hose is cracked, leaking, or damaged.
Replaced drain line Read more
Fix a dishwasher that won't start, stops mid-cycle, or has unresponsive controls. This main control board manages all wash functions and timing.
Secures your dishwasher to the underside of the countertop for stability. Replace this bracket if it's cracked, broken, or missing to prevent movement.
The Electronic Control Board Jumper Wire is an OEM replacement part for GE dishwashers. Causes of a faulty jumper wire include fracturing of internal interconnects from normal circuit board flexing during door closes. Overly aggressive cleaning solvents may also damage wire insulation over time. Symptoms of a problematic jumper wire include:
This is a genuine OEM part that works for some models of GE, and Hotpoint models.
Replaced the circuit board and the associated wiring harness. Read more
Insulation blanket that wraps around the dishwasher tub to reduce noise and maintain temperature. Replace if damaged, torn, missing, or contaminated.
I pulled the DW out, pulled off the old blanket pieces, vacuumed up the millions of small parts, then put the new blanket on, I did use some packing tape to hold it in place. Easy! The challenge was moving the unit out, then back in, but that was simply time and a little effort. Read more
The Ultra fine filter kit is an OEM replacement part for GE dishwashers. As part of the rinse cycle, this filter helps further remove food debris from dishes before the dry cycle begins, allowing for sparkling clean results. The ultra-fine filter is designed with a close-nit mesh that is able to capture microscopic food particles and sediment. This prevents debris from re-depositing onto dishes or interfering with proper drying. Symptoms of a bad ultra-fine filter include:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Initially I replaced the heating element since it appeared compromised. When that failed to fix the problem I went to your site and reviewed the other options and found the exact answer I needed. I replaced the flood switch assembly and ultra fine filter since mine was needed replacing. Problem solved!! Read more
Replacement silverware basket for dishwashers. Installs on the lower rack to organize flatware during wash cycles. Replace if cracked, broken, or missing.
The parts worked perfectly. no assembly, just install.delivered in 5 days, quick and easy. Thanks. Read more
Replacement upper spray arm for dishwashers. Installs at the top of the tub to distribute water across the upper rack. Replace if broken, cracked, or missing.
I just needed a new one to clip back into place. Read more
The Filter Ball is an OEM replacement part for GE dishwashers. As a key internal filtration component, it helps trap and remove food soils and other residue from washing water to maintain hygienic cleanliness standards.
Causes of a bad filter ball can include worn filter mesh that no longer adequately strains soils or substances that pass through more readily over time.
Symptoms of a bad filter ball include:
This GE replacement filter ball is also compatible with some Hotpoint, RCA, and Kenmore dishwashers.
Replaced sump and related pieces. Also replaced door baffles that were getting bad. The hardest part of job was removing the dishwasher from the its spot in cabinets. The info on site made replacing parts easy. Read more
Dishwasher not filling or draining properly? The water level float detects levels to control filling and draining. Easy DIY repair in about an hour.
Spoke to an appliance repairman who said it does not pay to fix and is too difficult I had already ordered the parts. So I called AppliancePartsPros.com. They said no problem if I wanted to return parts BUT the technician suggested that all appliances are repairable I gave it a shot I had to disconnect the dishwasher, same as if I was to replace it Followed on AppliancePartsPros.com repair parts video and replaced the pump, inlet valve, and solenoid all took about an hour and the dishwasher... Read more
Covers the bottom front of your dishwasher, protecting internal components and reducing noise. Replace if cracked, dented, or missing for a clean look.
Secure your dishwasher to the underside of countertops with this screw and button plug kit. Replace stripped, missing, or damaged fasteners.