Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Middle Conduit Assembly is an OEM part for GE dishwashers, designed to facilitate the proper routing and distribution of water during the wash cycle. This part ensures that water is evenly distributed to the middle spray arm, providing effective and efficient cleaning of dishes placed on the middle rack.
Causes of a bad middle conduit assembly can include clogs from food debris, mineral buildup from hard water, and physical damage due to regular use or improper loading of dishes. These issues can impede water flow, reducing the dishwasher’s cleaning efficiency.
Symptoms of a bad Middle Conduit Assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered part, received it in two days. Parts were amazingly easy to install. Appliance works like new again! Thanks for a wonderful shopping (and repair) experience. Read more
The Door Latch Strike is an OEM part for GE dishwashers. It ensures the dishwasher door latches securely, allowing the appliance to operate only when the door is properly closed.
Causes of a bad door latch strike can include wear and tear from regular use, damage from slamming the door, or misalignment due to repeated opening and closing.
Symptoms of a bad door latch strike include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Based on our research, the dishwasher latch was one of the most common causes for our model of dishwasher malfunctioning. We purchased this replacement unit, and thanks to the help provided via videos and diagrams, my wife and I were able to very easily install the new latch. While this replacement did not totally fix our problem, it was part of it. Shipping on the part was very quick, I ordered it on Friday night, and the latch arrived Saturday morning. Read more
Controls airflow in your dishwasher door. Replace if cracked or if you see leaking from the door vent area. Confirm fit with your model number.
Upon taking the door apart it looked like the leak was coming from the vent so I replaced the vent cap, vent seal and the transition piece. I did not have to change the seals. It took me a while to figure out how to get the door apart, but once I did, it was fairly straightforward. Read more
Creates a watertight seal around the dishwasher sump to prevent leaks. Replace if you notice water leaking underneath. Verify fit by model number.
Purchased your parts watched the awesome video on your site. Repair was complete within an hour the dishwasher is running as I am typing this. Thank you so much for the service you offer. Regards, Rich Read more
Connects dishwasher door to spring mechanism to prevent door from dropping when opened. Replace if cable is broken, frayed, or detached from pulley.
My first thought was to take the dishwasher to the dump when I saw the pack rats ate the wiring while it was in storage. However, it was only a couple years old so just out of curiosity I looked at the appliance parts pros website and was pleasantly surprised that I could replace every wiring harness on my GE dishwasher for under $100. That is a lot of wire. The process to replace the wiring was nearly effortless. The new harnesses were identical to the old so all I had to do was find the 2... Read more
Replacement drain hose for dishwashers. Carries wastewater from the unit to your household drain. Needed when original hose is cracked, leaking, or damaged.
Replaced drain line Read more
Fix a cracked or broken dishwasher handle that won't open properly. Requires removing front panel with torx and hex screws. Video guide available.
Reviewed repair via youtube. Disconnected the dishwasher power and water. Removed dishwasher from under the cabinet. Removed and disassembled the door and then made the repair. The last step reinstalled the door and dishwasher. Read more
The Electronic Control Board Jumper Wire is an OEM replacement part for GE dishwashers. Causes of a faulty jumper wire include fracturing of internal interconnects from normal circuit board flexing during door closes. Overly aggressive cleaning solvents may also damage wire insulation over time. Symptoms of a problematic jumper wire include:
This is a genuine OEM part that works for some models of GE, and Hotpoint models.
Replaced the circuit board and the associated wiring harness. Read more
The Ultra fine filter kit is an OEM replacement part for GE dishwashers. As part of the rinse cycle, this filter helps further remove food debris from dishes before the dry cycle begins, allowing for sparkling clean results. The ultra-fine filter is designed with a close-nit mesh that is able to capture microscopic food particles and sediment. This prevents debris from re-depositing onto dishes or interfering with proper drying. Symptoms of a bad ultra-fine filter include:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Initially I replaced the heating element since it appeared compromised. When that failed to fix the problem I went to your site and reviewed the other options and found the exact answer I needed. I replaced the flood switch assembly and ultra fine filter since mine was needed replacing. Problem solved!! Read more
Replacement upper spray arm for dishwashers. Installs at the top of the tub to distribute water across the upper rack. Replace if broken, cracked, or missing.
I just needed a new one to clip back into place. Read more
Secure your dishwasher to the underside of countertops with this screw and button plug kit. Replace stripped, missing, or damaged fasteners.
Order parts from Appliance Parts Pros. Read more
The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.
Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.
Symptoms of a compromised screw placement include:
This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you . Read more
Dishwasher won't start or buttons unresponsive? The door wiring harness connects the latch, switch, and controls to the main board. Moderate DIY repair.
Started off troubleshooting (power to the dishwasher, power from main control board). Ordered parts from AppliancePartsPros.com User interface panel on the door, main control board, and door wiring harness. Parts arrived quicker than expected and were a direct replacement. Read more
Replacement door spring for dishwashers. Provides tension to help the door open and close smoothly. Replace if broken, worn, or door won't stay open.
I ordered the parts from AppliancePartsPros.com and they had everything I needed to do the repairs. The parts order was filled accurately and arrived quickly. The repairs only took me approx. 20 minutes. I know who carries the parts that I may need for future appliance repairs now. I put AppliancePartsPros.com in my favorites on my PC. Reasonable prices, good inventory and quick shipping, Appliance Parts Pros gets an A+++++ Thanks, DW Read more
Door hinge pulley for dishwashers. Works with springs and cables to balance door movement. Replace if cracked, broken, or causing uneven door operation.
I was able to slide the washer out of the cabinet to access the the cable. I installed the end of the cable on the spring the put the other end of the cable onto the door. The parts fit perfectly and the project was accomplished in a short time. Read more
Dishwasher not filling with water? A failed water inlet valve is often the cause. This valve controls water flow during wash and rinse cycles.
Saw the same problem described by other users. The part was very reasonably priced, so I took a chance that it was the cause of the problem. Part showed up within 2 days ! I installed it same day, and turned on the dishwasher.... and it worked ! Great to have my dishwasher back. Appliance pro's is awesome ! //Greg Read more