Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
If your dishwasher won't start or has no power, the control board fuse may be blown. This 4.1 amp fuse protects electronic components from overcurrent.
With the door latch. Easy fix. Unplugged the bad one and plugged in the new one. Longest time was getting the screws out and screwing them back in. Read more
Connects dishwasher door to spring mechanism to prevent door from dropping when opened. Replace if cable is broken, frayed, or detached from pulley.
My first thought was to take the dishwasher to the dump when I saw the pack rats ate the wiring while it was in storage. However, it was only a couple years old so just out of curiosity I looked at the appliance parts pros website and was pleasantly surprised that I could replace every wiring harness on my GE dishwasher for under $100. That is a lot of wire. The process to replace the wiring was nearly effortless. The new harnesses were identical to the old so all I had to do was find the 2... Read more
Creates a watertight seal around the dishwasher sump to prevent leaks. Replace if you notice water leaking underneath. Verify fit by model number.
Purchased your parts watched the awesome video on your site. Repair was complete within an hour the dishwasher is running as I am typing this. Thank you so much for the service you offer. Regards, Rich Read more
Replacement drain hose for dishwashers. Carries wastewater from the unit to your household drain. Needed when original hose is cracked, leaking, or damaged.
Replaced drain line Read more
Fix a cracked or broken dishwasher handle that won't open properly. Requires removing front panel with torx and hex screws. Video guide available.
Reviewed repair via youtube. Disconnected the dishwasher power and water. Removed dishwasher from under the cabinet. Removed and disassembled the door and then made the repair. The last step reinstalled the door and dishwasher. Read more
Secures your dishwasher to the underside of the countertop for stability. Replace this bracket if it's cracked, broken, or missing to prevent movement.
The Electronic Control Board Jumper Wire is an OEM replacement part for GE dishwashers. Causes of a faulty jumper wire include fracturing of internal interconnects from normal circuit board flexing during door closes. Overly aggressive cleaning solvents may also damage wire insulation over time. Symptoms of a problematic jumper wire include:
This is a genuine OEM part that works for some models of GE, and Hotpoint models.
Replaced the circuit board and the associated wiring harness. Read more
Seals the dishwasher tub edge to prevent water leaks during wash cycles. Replace if cracked, dried out, or leaking. Verify fit with your model number.
Replacement silverware basket for dishwashers. Installs on the lower rack to organize flatware during wash cycles. Replace if cracked, broken, or missing.
The parts worked perfectly. no assembly, just install.delivered in 5 days, quick and easy. Thanks. Read more
Insulation blanket that wraps around the dishwasher tub to reduce noise and maintain temperature. Replace if damaged, torn, missing, or contaminated.
I pulled the DW out, pulled off the old blanket pieces, vacuumed up the millions of small parts, then put the new blanket on, I did use some packing tape to hold it in place. Easy! The challenge was moving the unit out, then back in, but that was simply time and a little effort. Read more
The Ultra fine filter kit is an OEM replacement part for GE dishwashers. As part of the rinse cycle, this filter helps further remove food debris from dishes before the dry cycle begins, allowing for sparkling clean results. The ultra-fine filter is designed with a close-nit mesh that is able to capture microscopic food particles and sediment. This prevents debris from re-depositing onto dishes or interfering with proper drying. Symptoms of a bad ultra-fine filter include:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Initially I replaced the heating element since it appeared compromised. When that failed to fix the problem I went to your site and reviewed the other options and found the exact answer I needed. I replaced the flood switch assembly and ultra fine filter since mine was needed replacing. Problem solved!! Read more
Replacement upper spray arm for dishwashers. Installs at the top of the tub to distribute water across the upper rack. Replace if broken, cracked, or missing.
I just needed a new one to clip back into place. Read more
The Filter Ball is an OEM replacement part for GE dishwashers. As a key internal filtration component, it helps trap and remove food soils and other residue from washing water to maintain hygienic cleanliness standards.
Causes of a bad filter ball can include worn filter mesh that no longer adequately strains soils or substances that pass through more readily over time.
Symptoms of a bad filter ball include:
This GE replacement filter ball is also compatible with some Hotpoint, RCA, and Kenmore dishwashers.
Replaced sump and related pieces. Also replaced door baffles that were getting bad. The hardest part of job was removing the dishwasher from the its spot in cabinets. The info on site made replacing parts easy. Read more
Secure your dishwasher to the underside of countertops with this screw and button plug kit. Replace stripped, missing, or damaged fasteners.
Order parts from Appliance Parts Pros. Read more
The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.
Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.
Symptoms of a compromised screw placement include:
This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you . Read more
Dishwasher won't start or buttons unresponsive? The door wiring harness connects the latch, switch, and controls to the main board. Moderate DIY repair.
Started off troubleshooting (power to the dishwasher, power from main control board). Ordered parts from AppliancePartsPros.com User interface panel on the door, main control board, and door wiring harness. Parts arrived quicker than expected and were a direct replacement. Read more