We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.
I unplugged the fridge and took all the food and shelving out of the freezer and then proceeded to take off the bottom sliding drawer rack on both sides off (4 Phillips head screws). Then took off the light bulb cover and then the light bulb. Then the back wall that covers the coils and tubes that the refrigerant runs through ( 2 screws with hex head). After sliding out the back wall I could see that the entire coil area was frosted and iced up. I took a blow dryer and melted all of it over... Read more
Most orders arrive by Wednesday, November 25
Refrigerator not cooling but freezer works? A failed evaporator fan motor stops cold air circulation. Common DIY repair with video guide available.
Shut off power in the panel box - easier than getting at the plug behind the unit. Had to take out the lower full-width drawer and the two crispers next. Removed two screws on the shelf above the wide drawer and removed the two shelf parts. Next was removing a screw from each wide drawer support. Then I pulled the support forward about an inch to disengage it from a post towards the back. There is a wiring connection in the right-hand support you will need to disconnect. Next, I removed a... Read more
Freezer door gasket seals the freezer compartment to maintain temperature. Replace if torn, cracked, or not sealing properly. Confirm fit by model number.
Emptied the freezer and removed the drawers to allow access to the seal. Read more
Removes contaminants from your refrigerator's water and ice. Replace every 6 months or when the filter indicator activates. Confirm fit with your model.
Replaced filters Read more
Protects and diffuses LED light inside your refrigerator. Replace if cracked, discolored, or causing dim lighting. Verify fit with your model number.
While waiting for parts for GE repair man to fix the fan issue the interior lights acted up, first one flickered and then went out followed by all the rest going dim. After reading stories on your web site, I ordered a couple of replacement lights and after installing the burnt out one they all came back to full strength! Thanks for the info and parts! Read more
Freezer thawing or frost building up inside? This defrost thermostat monitors coil temperature during defrost cycles. Easy DIY fix with video guide.
Replaced fan motor in fresh food section, easiest repair I have ever made, took longer to get shelves out than replacing motor.. Read more
Seals the refrigerator fresh food compartment door to maintain temperature and prevent warm air entry. Replace if torn, cracked, or loose. Verify fit.
The fix went great. I replaced the right-side door switch and it works great. The switch came as a three prong, and the original was a two prong. I matched the two prong wires with/on where they go on the switch, and it worked great. Next is the left door gasket. I am letting the new door gasket lay flat for a few days to see if the folded kinks/creases will relax out. They do instruct to use very hot water to get the folded shipping kinks out of it and will try that as a last resort. Read more
Gallon door bin assembly for refrigerator inner door storage. Replaces cracked, broken, or missing bins. Holds gallon containers like milk and juice.
I ordered the new bin and received it in a very timely manner. I just replaced the broken bin within seconds and fits perfectly Read more
The Icemaker Assembly is an OEM replacement part for GE refrigerators. This assembly is responsible for producing and dispensing ice cubes. It includes all necessary components for ice production, ensuring your refrigerator has a consistent supply of ice.
Causes of a bad icemaker assembly can include wear and tear over time, mineral buildup from hard water, electrical issues affecting the control module, or damage to the mechanical components.
Symptoms of a bad Icemaker Assembly include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered valves and new ice maker. Couple sites mentioned problem could be ice in the waterline and to make sure temps be set to 37 in frig and 0 in freezer. I had adjusted temps to these the day I ordered parts. Parts arrived a couple of days later so I opened up the ice maker and found the ice bin to be full! Guess the temp adjustment worked. I just kept the parts for when they are needed. For those unaware, access to the ice maker is really simple. There is a latch on the backside of the... Read more
Fix a blank display, non-working water/ice dispenser, or beeping control panel. This refrigerator dispenser board is a straightforward replacement.
Easy as removing s few screws and switching out two plugs. Read more
Glass cover for refrigerator vegetable pan maintains humidity and freshness. Replace if cracked or broken. Slides into plastic frame. Verify fit by model.
Called ApplianceParts for replacement glass. It came quickly. Installed. Done. Read more
The mullion hinge spring is a small coil spring that provides tension to the hinged mullion flap or divider between two refrigerator doors or compartments, keeping it pressed firmly closed when not in use. It ensures a proper seal and prevents cold air from escaping between the doors. Replace this part if the mullion flap hangs loosely, does not spring back into position, or you notice warm spots or frost buildup near the center divider of your refrigerator.
New spring Had trouble getting old spring pc out. drilled a small hole from bottom and pushed pc out with small paper clip. Worked good. Read more
Fix a refrigerator that won't cool or clicks but doesn't start. This compressor start relay and overload protects against electrical issues. DIY-friendly.
WENT TO YOUTUBE FOUND OUT HOW TO TEST THE COMPRESSOR IT TESTED GOOD SINCE IT WAS NOT THE COMPRESSOR I ORDERED THE PARTS THAT WOULD MAKE IT WORK AGAIN - THE CAPACITOR & OVERLOAD PTCR COMBO I INSTALLED THE PARTS NOW I HAVE A FRIG. THAT'S WORKING AGAIN.AT A FRACTION OF THE COST TO REPAIR- THANK'S TO YOUTUBE. Read more
Ice maker stopped making ice? This dual water inlet valve controls flow to both the ice maker and water dispenser. Common DIY fix for no ice production.
Ice compartment door won't stay shut? This icebox door latch secures the ice maker door closed. Easy DIY repair, typically takes 5-10 minutes.
Flat screwdriver. Pry cover latch off. It has two snaps. I was able to get it off without breaking it. Replace latch icebox door. Snap cover latch back on. Five minutes being very careful. Read more
Replacement fastener for refrigerator door handles. Secures handle to door with durable metal construction. Needed when original is cracked or broken.
My initial thought was we would have to purchase a new freezer since GE parts for our refrigerator was not available but I searched your website, yep it was available, I got on live chat to confirm the piece; it was a frictionless experience; I ordered that day it came 2 days later, my husband got out his tools and walaaaaah it’s fixed!! Love this experience, you are awesome! Read more