Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Gld3600l00bb Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Door Mounting Screw
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304428306

 

More
Nut Tower Heater
Genuine Ge part
By: Ge
Part Number: WD01X10097

 

More
Lower Spray Arm Bearing
Genuine Ge part
By: Ge
Part Number: WD01X10107

This is a genuine OEM replacement lower spray arm bearing sourced directly from the manufacturer for use in dishwashers. The lower spray arm spins to distribute water to the dishes during the wash cycle. Thus spray arm bearing supports the spray arm and lessens the friction, which allows it to spin more easily. If the dishes are not clean after the wash and rinse cycle, or the arm is making loud noises, the spin arm bearing may need to be replaced. This bearing is a small metal part that may wear over time. If the bearing is distorted or damaged, the arm will not sit level, and spinning may be very loud, or it may not spin. The spray arm bearing should be replaced. Turn off the breaker or disconnect the power to the dishwasher. Open the dishwasher and pull the bottom rack out. Turn the lower spray arm counterclockwise to remove it. Use a telescoping magnet to pull the bearing up from the hole in the middle. Install the new bearing and reinstall the spray arm. Put the dishrack back inside and reconnect the power.This lower spray arm bearing is a gray metal part that is sold individually. It is designed for use in dishwashers designed by General Electric and Hotpoint.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Leaking water onto the floor   John G. • Canmer , KY • May 28, 2015

The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more

More
Clip Sensor
Genuine Ge part
By: Ge
Part Number: WD01X10296

 

More
Conduit Spray Arm Mid
Genuine Ge part
By: Ge
Part Number: WD12X10052

 

Do-It-Yourself Stories from Customers like You Bottom rack was rusting out and the middle sprayer was not spinning   Charles B. • Rockwall , TX • July 29, 2016

Replaced the rack, the replacement was already fully assembled. Replacing the middle sprayer and assembly wasn't too bad. Read more

More
Spray Arm Water Supply Tube
Genuine Ge part
By: Ge
Part Number: WD12X10057

 

Do-It-Yourself Stories from Customers like You Leaking water onto the floor   John G. • Canmer , KY • May 28, 2015

The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more

More
Bracket, Rinse Module (Mounting Bracket)
Genuine Ge part
By: Ge
Part Number: WD12X10146

This mounting bracket secures the dishwasher rinse module/dispenser assembly so the dispenser stays properly positioned for reliable rinse-aid delivery. A correctly seated bracket helps prevent dispenser misalignment and related rinse-aid issues. What it does:

  • Holds the rinse module/dispenser firmly in place inside the dishwasher tub or door
  • Keeps the dispenser aligned so rinse aid can be released as designed
  • Helps prevent dispenser rattling, shifting, or partial seating during cycles
  • Can reduce symptoms like poor rinsing, visible spots, or uneven rinse-aid release
What's included: One mounting bracket for the rinse module/dispenser. Install notes:
  • Disconnect power to the appliance before starting any work for safety
  • Basic hand tools (screwdriver, nut driver) are typically needed; follow OEM instructions
  • Align the bracket and secure fasteners without over-tightening to avoid damage

Do-It-Yourself Stories from Customers like You Soap suds left in tub after rinse cycle   John O. • White Plains , NY • May 20, 2017

Rinse aid was not dispensing properly. so replacing the dispenser fixed the problem. Very easy to do with the replacement part, although the repair video was not exactly accurate; it was actually easier. Remove the screws holding the door liner and lift it off, and the part is right in front of you. 6 screws off, remember what color wire goes where, reassemble, and you're done. Problem gone. As usual, Appliance Parts Pros is the absolute best source. Read more

More
Shield Main Board
Genuine Ge part
By: Ge
Part Number: WD12X10203

 

More
Dishwasher Air Diverter Assembly
Genuine Ge part
By: Ge
Part Number: WD12X10288

Directs airflow inside the dishwasher door to maintain proper venting. Replace if cracked, broken, or foam is damaged to prevent moisture buildup.

Do-It-Yourself Stories from Customers like You Water droplets around door latch and air vent!   Michael T. • Chewelah , WA • August 02, 2015

I fixed the issue by replacing the air diverter assembly! in the dishwasher! Because the old assembly wasn't covering or sealing to keep the water droplet from forming! Read more

More
Handle Latch Wh
Genuine Ge part
By: Ge
Part Number: WD13X10010

 

Do-It-Yourself Stories from Customers like You Dishwasher handle actuator broke spring disappeared.   Bruce R. • Oelwein , IA • May 26, 2020

The video provided by Appliance Parts Pros is excellent! I followed its steps. The one problem I had was getting the ribbon to disconnect. The plastic pieces that hold it together are fragile and broke. So, instead of disconnecting the ribbon I placed a kitchen stool in front of the dishwasher door and laid the top portion on it. Then I was able to remove the handle and change out the actuator. The handle was fine and did not need replacing; a tab on the actuator had broken. (In my opinion... Read more

More
Hinge Arm Asm Lh
Genuine Ge part
By: Ge
Part Number: WD14X10024

 

More
Hinge Arm Asm Rh
Genuine Ge part
By: Ge
Part Number: WD14X10025

 

More
Thermistor
Genuine Ge part
By: Ge
Part Number: WD21X10023

 

More
Coarse Filter
Genuine Ge part
By: Ge
Part Number: WD22X10029

 

Do-It-Yourself Stories from Customers like You Bottom coarse filter curled up in corners letting debris get through and clog the wash arms   Caroline F. • Oregon City , OR • August 22, 2016

I ordered a bottom coarse filter, which was easy to order through Appliance Parts Pros, received it sooner than expected, watch a u tube video on how to replace it and my dishwasher is running well. Read more

More
Hose Fill
Genuine Ge part
By: Ge
Part Number: WD24X10026

 

Do-It-Yourself Stories from Customers like You The water inlet valve leaked and caused floor damage   Nicholas C. • Granby , CT • August 22, 2016

Looked at your diagram and located the part replaced hose and clamps as a precaution Read more

More
Cover Front - S/Stl
Genuine Ge part
By: Ge
Part Number: WD27X10211

 

Do-It-Yourself Stories from Customers like You Scratched and dented door front on dishwasher   Rae H. • Franklin , TN • October 01, 2016

Ordered new stainless door front panel, which came the very next day, and was a breeze to install. Dishwasher looks brand new! Only glitch was removing the old door front panel that some idiot had previously glued on at the top. Once that was pried off the new panel went right on Read more

More
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store