Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Seals the evaporator cover to prevent air leaks, frost buildup, and temperature fluctuations. Replace if worn or cracked. Verify fit with your model.
Volt Ohmmeter test indicated defrost thermostat and heater were OK. Defrost voltage measured ~25 VAC. I ordered all the most likely repair parts, but thought the control board had failed. I replaced the control board and the freezer has been working properly for several days. I haven't decided whether to keep or return the unused parts. I damaged the paint removing the electrical control. There must be a trick to protect the paint from the putty knife and screwdriver. Read more
Secures the crisper cover slide for smooth, aligned operation. Replace if broken or missing to restore proper drawer function. Confirm fit with your model.
Shelving went in without a problem. Very simple. Checked the installation video anyway in case there was a trick to not breaking something. Learned that the nylon clips needed to be transferred and found one missing on another shelf, so ordered a replacement. The water valve was one I replaced some time ago but one of the solenoids was bad, confirmed with a meter (ohm reading is between 200-500; less than 200 or more than 500 is broken). Replaced it without a problem (becoming expert at... Read more
Adjustable humidity control slider for refrigerator crisper drawer covers. Replaces cracked, broken, or missing controls to restore smooth vent operation.
This was a simple replacement of the crisper drawer and humidity control sliding switch; easy to snap into place and align with the tracks. Read more
Ice falling through cracked bin into freezer? This ice storage container restores proper ice collection and prevents spillage. Simple DIY fix.
Replaced it. Read more
Upper door hinge for refrigerator fresh food and freezer doors. Replaces broken, bent, cracked, or missing hinges from moving or wear.
It worked good Read more
Upper door hinge bearing provides a low-friction bushing for the top hinge pin. Replace if worn, cracked, or causing squeaking sounds during door operation.
Replaced the hinge bearing and the door closer plate. The works perfectly, no more popping and it literally only took 10 minutes to do! Read more
Ice not dispensing or jamming? A worn auger can't move cubes from bin to chute. This rotating shaft restores smooth dispensing. Moderate DIY repair.
Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire... Read more
Connects sections of water tubing inside your refrigerator. Replace this adapter if cracked, leaking, or popping off to stop drips and water damage.
Ordered parts, watched videos and had it like new in five minutes! Read more
Bottom front grille that covers the lower compartment while allowing airflow. Replace if cracked, broken, or missing to restore a finished appearance.
Ordered both parts from Appliancepartspros.com. The pictures of the website made it easy to order the correct parts. So far I've replaced the grill / kick plate. Took me longer to vacuum out the dust from the coils than it took to replace the part. Have not yet replaced the inner door panel. That will be a project for this coming weekend. Do not anticipate it being a problem to do so. Read more
This replacement power cord delivers household electricity from the outlet to your appliance. Installing a new cord restores safe, reliable power when the original is damaged, worn, or causing intermittent operation.
I placed a order for a replacement cord. It was an exact fit. Whole process was about 10 minutes max. Read more
Retainer bar mounts to refrigerator door shelf to secure tall bottles and containers. Replace if cracked, broken, or missing to prevent items from tipping.
New Glass. Read more
Specs: Hex head ,1/4-20 x 5/8
My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more
Ice dispenser not dispensing or crushing properly? The drive cam transfers motor rotation to advance the ice dispensing cycle. DIY repair in 30-45 minutes.
Fix intermittent refrigerator operation caused by worn or heat-damaged component sockets. This receptacle restores secure plug-in connections for reliable performance.
Replacement drawer slide for freezers. Restores smooth gliding when original is broken, worn, or causes sticking. Essential for proper drawer alignment.
I ordered the sliders and fixed the drawer. Read more
Sliding basket installs in the freezer drawer to organize frozen items. Replace if cracked, broken, or missing to restore pull-out storage compartments.
The storage bins I ordered and received fit perfectly. Read more