Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Door Handle is an OEM replacement part for Frigidaire washing machines and dryers. As the component used to open and close the washer or dryer door, the handle plays an essential role in user access and operation. Causes of a bad handle include broken or cracked plastic due to excessive force or repeated slamming of the door, as well as normal wear and tear over extended use. Failures in the handle's attachment hardware or mechanism used to interface with the door's lock can also occur. Symptoms of a bad handle include:
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
Replaced with new handle, about five minutes. Read more
This OEM replacement part is a drive motor for washers. The drive motor is the main engine that propels the washer tub to spin and perform its primary function of washing clothes. Over time, a drive motor can lose power or stop working altogether due to excessive wear and tear. If the washer is no longer spinning or not working as efficiently as it once did, the drive motor will need to be replaced. Thankfully, replacing this part is a relatively easy fix.To begin, start by unplugging the washer. Once unplugged, move the washer away from the wall to gain access to the back panel. Uninstall the back panel by removing the mounting screws. Once removed, gain access to the drive motor and remove the screws that attach it to the washer. After unthreading the screws, pull the drive motor out of its place and position the new motor in its original position. Fasten the mounting screws and make sure the motor is securely attached. This genuine replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore brand washers.
Unplug washer then took back panel off. Unplug wires from motor then removed four screws from the motor housing then took old motor off and replaced it with new motor Read more
Fix loud banging, grinding noises, or oil leaks during spin with this inner tub assembly. Includes spider and shaft. Advanced repair, 2-4 hours.
The biggest challenge was replacing the inner tub assembly (with spider and shaft) without full access to the top of the washer, only to the back. Due to space limitations, the matching stacking gas dryer could not be removed: it could only be elevated (using wood blocks) about 4 inches above the top of the washer. Removing the washer's hoses, motor, control panel, and rear weight, and releasing the shock absorbers, was fairly easy. But supporting the outer tub assembly, with its front-end... Read more
After a few days of our 16 YO Frigidaire Affinity front-loading washer (model ATF7000EG0) dancing around the room bellowing like an elephant in musth, I decided to fix it. Well, technically, my wife decided I would fix it. I postulated that the OEM tub suspension system was rapidly deteriorating, so I ordered the shock absorber kit (5304485917), three nylon pins (131268300), two suspension springs (134362800), and a new drive belt (134051003) for good measure. These parts all arrived in... Read more
Outer door panel that replaces a damaged or worn outer door surface, restoring the appliance's finished exterior and protecting inner door components. Ideal when the exterior is dented, scratched, or cosmetically damaged. What it does
Purchased the door panels (both sides) and replaced them both. Not sure if spending $150 on door parts for a 15 year old washer was a great investment, but the parts worked great. Took maybe five minutes to put it all back together. Read more
This is a genuine OEM timer that can be used with different models of washers and has been manufactured by Frigidaire. This part has been sourced directly from the manufacturer to ensure the highest possible quality.This timer is critical for the dryer to run properly as it controls the electrical components to enable the correct duration of the washing machine's cycles. If the timer is broken, the washing machine may not run for the intended amount of time or, in some cases, might not function at all. In such instances, the timer will need to be immediately replaced. The appliance will need to be completely disconnected from all power and water sources before repairs are undergone and work gloves should be worn to prevent injury.This timer is sold individually and is manufactured from high-quality, durable, non-corrosive materials. It is an authentic replacement part and compatible with a variety of models of washing machines that have been made by Frigidaire, Electrolux, Gibson, and Kelvinator.
I couldn't figure out how to remove the original timer, but found a YouTube video from someone who had the same problem and finally figured out the easy step for removing the original timer (the timer knob is threaded and is removed by unscrewing the timer knob itself whereas the other knobs just pull off). The new timer was specifically for this machine, arrived quickly, and installed easily. The only problem I had was the threaded mounting holes were a different size from the originals and I... Read more
Replacing the timer, timer knob, dial timer, Read more
This small pin secures the program selection knob to the dryer's control panel shaft. Replace if the control knob spins freely without changing settings or falls off the control panel.
The error code said door switch was bad. Ordered one and replaced it, washer repaired. This was after I paid a repairman nearly $400 and did not repair my machine. I will use applancepartspros again. Read more
The lady that talked to Fred gave him great help. She told him how to take the front off to replace the part. It only took a couple of minutes to do the repair. Even though I work for Sears parts dept. he didn't think I knew what I was doing.. Read more
Includes: pulley and pulley bolt.
New parts ordered and installed. Hooked everything back up and she's running like a stealth bomber over North Korea.. completely silent Read more
I took 11 year old washer apart, by watching step by step instructional video on this site. Found the problem & order the part (inner tub,shaft & spider). It's a shame you can't just order the spider, because the stainless steel tub & shaft were still perfectly good. Apparently, this is the manufactures way of making money. Anyway, I replaced part & washer is as good as new. The hardest part was having to have someone help lift the outer tub out & back in. Very happy, I did not have to buy a... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.