Gne27jymfs Parts

This refrigerator meat drawer restores a clean, dedicated space for meats and deli items in the fresh food section. Replace a cracked or missing pan to regain smooth sliding, proper fit, and organized storage.

• Provides a dedicated storage area for meats and deli items in the fresh food compartment
• Slides on existing tracks/rails for easy access and proper seating
• Helps contain drips and spills to protect shelves below
• Typical symptoms: cracked or broken drawer, broken tabs, won't slide or seat correctly, falls off tracks, or missing drawer

• Remove contents and pull the existing drawer straight out; lift slightly to clear the rails
• Clean and inspect the tracks/rails before installing the new drawer
• Align the new drawer with the tracks and slide it in until fully seated—do not force
• Allow the new drawer to reach room temperature before installation; cold plastic can crack if flexed

Size: 10-32 GXTT FLP.595 S

This DC evaporator fan motor moves air across the evaporator coils and circulates chilled air throughout the compartments. Replacing a failing motor restores proper airflow to help maintain even temperatures and reduce frost buildup. What it does

• Circulates air across the evaporator to distribute cold air through the refrigerator and freezer
• Helps maintain stable temperatures and supports proper defrost performance
• Common symptoms of a failing motor include no or weak airflow, fan not running, loud or intermittent fan noise, frost/ice on the rear panel, or freezer cold while fresh food is warm

• 1 DC evaporator fan motor

• Disconnect power to the appliance before servicing
• Remove shelves/drawers and the evaporator cover to access the fan area
• Note wire/connector orientation; transfer the fan blade and mounting hardware from the old motor if your model uses separate parts
• Ensure the blade spins freely with proper clearance before restoring power and verifying airflow

This overload/PTCR combination is the refrigerator compressor's start device. It briefly powers the start winding and protects against overheating, helping the compressor start reliably and cycle safely so your refrigerator can maintain proper temperatures.

• Provides momentary start assistance via a PTCR solid-state relay, then opens automatically
• Protects the compressor by opening the circuit if overheating or excessive current is detected
• Symptoms of a faulty device may include no cooling, compressor clicking or humming without starting, or starting then shutting off after a few seconds
• Visible heat damage or discoloration on the device or compressor terminals can indicate failure

• Disconnect power before servicing; access the compressor compartment from the rear
• Note/photograph wiring and terminal orientation; transfer wires and any run-capacitor lead to the same positions on the new device
• Push the device fully onto the compressor pins; ensure a snug fit and proper seating
• Capacitors can retain a charge; discharge and handle per manufacturer instructions

The Grommet and Tube Icemaker Assembly is an OEM part for GE refrigerators. This assembly features a sealing grommet that fits snugly around refrigerant tubes entering the icemaker system. It prevents air leaks while allowing flexible movement of insulated tubing.

Symptoms of a bad grommet assembly include:

• Frost or condensation building up around the tube entry point  
• Difficulties with the icemaker maintaining proper freezing temperatures

Causes can be splits or cracks in the rubber grommet developing after years of fluctuating fridge temperatures contracting and expanding the material. 

This GE OEM replacement restores the crucial refrigerant line seal into the icemaker. Its durable grommet protects the refrigeration circuitry to ensure efficient icemaking for the life of the appliance. Compatible with some Hotpoint, RCA, and Kenmore side-by-side refrigerator configurations.
 

The Manifold & Housing are OEM components specifically designed for GE refrigerators. This part includes both the manifold which distributes water and the outer housing that protects it. 

The manifold & housing work together to deliver filtered water to the refrigerator's dispenser and ice maker. It is responsible for efficiently directing water flow and ensuring reliable operation of components that require water. 

Symptoms of a bad manifold & housing include:

• Low water pressure at the dispenser 
• Streaking or staining around water line connections
• Ice maker or dispenser malfunctions due to lack of water
• Dripping or leaks from manifold or housing areas

This OEM GE part is specifically designed to fit your model fridge. It is also compatible with Hotpoint, RCA, and some Kenmore models for a factory fit and like-new performance.

The Flat Chrome Badge is an OEM part for GE refrigerators. It is responsible for displaying the GE logo and model information on the front of the refrigerator. As an identifiable brand marker, the badge contributes to the overall appearance and style of the appliance.

Causes of a bad badge can include damage from impacts or bending, discoloration or tarnishing over time, or simple wear and tear that renders the badge appearance faded or illegible.

Symptoms of a bad badge include:

• A missing, loose, crooked or illegible badge
• Signs of denting, scratching or corrosion
• An outdated or inconsistent badge that doesn't match the model

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

Specs: 8-18 AB IHW 5/8 S

This cam closure is the small pivot piece that helps the refrigerator fresh-food door close and stay aligned. Replacing a worn or broken cam restores smooth door movement and helps the door seal evenly to maintain cooling. What it does:

• Guides the fresh-food door cam so the door pivots and latches correctly.
• Helps correct sticking doors, doors that hang or bind, and uneven gaps that can let cold air escape.
• Replaces a worn, cracked, or broken closure that can cause misalignment or noisy door operation.

• Disconnect power or unplug the refrigerator before beginning any work.
• Remove the door or access trim per the manufacturer's instructions to reach the cam area; keep track of hinge pins and fasteners.
• Pry or pop out the old cam and press the replacement into the cam slot until it snaps into place; check door alignment and operation after installation.

This condenser fan mounting bracket secures the condenser fan motor and blade in the correct position to move air across the coils. Replacing a cracked or bent bracket restores stable mounting, reduces vibration, and helps maintain proper condenser airflow.

• Holds the condenser fan motor/blade assembly in alignment for proper airflow through the condenser
• Maintains clearance to prevent the fan blade from rubbing or contacting nearby components
• Helps reduce rattling, vibration, or scraping noises from the rear of the refrigerator
• Damage or misalignment can contribute to restricted condenser airflow and warmer temperatures

• Disconnect power and pull the refrigerator away from the wall to access the rear service area
• Remove the rear lower access panel; note wiring and hardware locations
• Support the fan motor/blade while removing the old bracket; transfer motor, blade, grommets, and screws to the new bracket
• The fan spins freely with proper clearance and correct airflow direction before reassembly

The Cold Water Tank is an OEM replacement part for GE refrigerators. This tank is responsible for storing and supplying cold water to the dispenser, keeping it cool and ready for dispensing. 

A bad cold water tank can occur due to regular use or accidental damage. If you notice symptoms such as lukewarm or room temperature water coming from the dispenser, reduced water flow, or leaks around the tank area, it may indicate a need to replace this part.

Symptoms of a bad cold water tank include:

• Lukewarm or room temperature water from the dispenser
• Reduced water flow or weak water pressure
• Leaks or drips around the tank area

Restore your refrigerator by replacing the faulty cold water tank with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Slide Basket Lower Fz is an OEM part for GE freezers. This slide is responsible for smoothly gliding the freezer basket or drawer in and out, allowing for easy access and organization of frozen food items. It ensures that the freezer basket or drawer operates smoothly, making it effortless to retrieve items and maximize storage space.

A bad lower basket or drawer slide can occur due to wear and tear, damage, or other internal malfunctions. If you notice symptoms such as difficulty in sliding the freezer basket or drawer, sticking or jamming, or the basket or drawer not staying securely in place, it may be time to replace the slide.

Symptoms of a bad slide include:

• Difficulty in sliding the freezer basket or drawer
• Sticking or jamming of the basket or drawer
• Basket or drawer not staying securely in place

Restore organization to your GE freezer by replacing the faulty drawer slide with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

8-18 CA HX 1/2 S

This hinge cover screw fastens the hinge cover in place, helping keep it secure and protecting the hinge components beneath. Replace a missing or stripped screw to stop the cover from loosening or rattling.

• Secures the hinge cover to the door/cabinet hinge
• Helps protect hinge hardware and wiring under the cover
• Replaces stripped, rusted, or missing hardware
• Common symptoms: loose or missing hinge cover, vibration or rattling at the hinge area

• Disconnect power to the appliance before servicing near the hinge area
• Use the correct screwdriver; start threads by hand to avoid cross-threading
• Align the cover properly and tighten snugly—do not overtighten to prevent stripping
• Keep the door closed during work to minimize movement

This stand off is a small mounting spacer that secures and spaces internal components, restoring proper alignment and reducing panel movement or vibration for quieter, more reliable operation. What it does:

• Provides a solid mounting point to hold panels, brackets or wiring harnesses in place.
• Replaces broken, cracked or missing standoffs that allow components to shift or rub.
• Helps stop rattling, buzzing or misalignment caused by loose mounting points.
• Keeps proper clearance between parts to prevent wear or chafing over time.

• Disconnect power to the appliance before starting any repair.
• Remove the affected panel or access cover to reach the damaged standoff.
• Replace the old standoff with the new part; retain and reuse any existing screws or fasteners unless damaged.
• Hand-tighten mounting hardware and test the appliance; avoid overtightening plastic standoffs.

This wire freezer upper basket restores organized storage in the freezer upper compartment so frozen foods stay contained and easy to access. It replaces a missing or damaged upper basket to improve usable space and convenience. What it does:

• Provides a dedicated storage bin for frozen foods to keep items contained and organized
• Fits into the freezer's upper basket location to replace a cracked, bent, or missing basket
• Prevents items from falling through shelves or shifting during normal use
• Matches the OEM basket shape and mounting points for proper fit on compatible freezers

• Disconnect power to the appliance or unplug the refrigerator before servicing.
• Remove food and any nearby shelves or drawers, then install the basket into the existing supports or rails where the factory basket sat.
• Handle edges carefully and wear gloves if metal edges are sharp; do not force the basket into place.