Gtd33gaskww Parts

This blower housing assembly directs airflow from the dryer motor to the drum and exhaust, restoring proper venting and drying performance. It replaces a damaged or cracked housing to help the dryer move air efficiently. What it does:

• Channels airflow from the motor to the lint filter and exhaust duct
• Supports the blower wheel and maintains correct blower clearance
• Helps prevent air leaks that can cause poor drying or overheating
• Commonly replaced when the housing is cracked, warped, or excessively worn

• One blower housing assembly as shown

• Disconnect power before beginning any repair; ensure the dryer is unplugged or its breaker is off
• Removal may require access panels and disconnection of the blower wheel and motor mounting hardware
• Inspect and clean nearby lint and venting while the dryer is disassembled

This replacement side panel restores the exterior cabinet surface and protects internal components from dust and damage while keeping the appliance looking finished. It matches OEM fit and finish for a seamless appearance. What it does:

• Replaces a dented, scratched, or corroded cabinet side to restore the appliance's exterior
• Shields wiring, insulation, and internal components from accidental contact and debris
• Helps maintain proper airflow gaps and enclosure integrity where applicable
• Improves overall appearance for a like-new look

• One replacement side panel

• Disconnect power (and water if applicable) before starting any repair
• Remove trim, screws, or mounting clips securing the existing panel; retain fasteners unless replacements are provided
• Align the new panel carefully and secure with the original mounting hardware

This gas diffuser directs and evens the burner flame for reliable cooking performance. It helps stabilize heat distribution so burners light and heat more consistently across cookware. What it does:

• Spreads and evens gas flame to reduce hot spots and uneven cooking
• Helps stabilize burner ignition and maintain consistent flame shape
• Prevents direct flame contact with surrounding components
• Addresses symptoms like uneven heating, unstable flame, or partial burner operation

• One gas diffuser

• Turn off the gas supply and unplug the appliance before servicing
• Use basic hand tools; avoid overtightening or distorting the part
• If corrosion or sealed fasteners are present, replace affected hardware and check surrounding components

This ground strap assembly provides a secure electrical path from the appliance chassis to the grounding point, helping maintain proper grounding and reduce shock and interference risks. Designed to replace a worn or damaged grounding connection. What it does:

• Connects the appliance cabinet to the designated grounding point to complete the electrical ground path
• Restores a solid metal-to-metal grounding connection when original strap is corroded, broken, or loose
• Helps prevent arcing, intermittent electrical faults, and improper grounding-related behavior
• Supports safe operation of controls and reduces the risk of electrical shock from energized components

• One ground strap assembly (quantity: 1)

• Disconnect power (unplug or shut off breaker) before inspecting or replacing grounding components
• Use basic hand tools to remove and reinstall mounting screws; ensure ring terminals sit flat under screw heads
• Tighten fasteners to firm contact without over-torquing; verify strap is free of paint, corrosion, or debris at contact points

The Shoe Drying Rack is an OEM accessory component specifically designed for select GE dryers. As an added feature, this rack provides a convenient way to dry shoes along with regular laundry items. It allows wet shoes to be tumbled gently while being fully ventilated to dry effectively.

Symptoms of a bad shoe drying rack include:

• Broken or cracked rack supports that collapse the structure
• Missing hooks or attachment points to secure the rack in place  
• Rust, corrosion, or other damage that compromises its functionality

Causes of a bad shoe drying rack can include normal wear and tear over extended use, exposure to excessive heat levels, or damage from overloading or improper handling.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This factory screw fastens appliance panels, brackets, and internal components. Replacing missing or damaged hardware restores a secure fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable operation.

• Secures panels, brackets, and assemblies as designed for your model
• Replaces missing, stripped, or corroded hardware
• Helps resolve loose panels, vibration/rattling, or misalignment
• Maintains proper fit and function of mounted components

• Disconnect power; shut off gas and water before service
• Match to the original screw and location; order the quantity your model requires
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Refer to your model's parts diagram or service information for exact placement

The Trap Duct Assembly is an OEM part for GE dryers. It is responsible for guiding airflow through the dryer and out the vent, while also trapping lint and debris before it exits the dryer. 

Causes of a bad trap duct assembly can include excess buildup of lint that clogs the assembly, damage or cracks in the assembly that reduce airflow, or loose or missing components. 

Symptoms of a bad Trap Duct Assembly include: 

• Reduced or inefficient drying times 
• Vibrating or rattling noises from the vent area
• Excessive lint building up inside the dryer
• Vent blockages or restrictions 

This OEM GE replacement is also compatible with Hotpoint, RCA, and some Kenmore models. 

This Valve & Burner Assembly is an OEM part for GE dryers. Responsible for controlling the flow of gas to the burner where it is ignited to produce heat. This assembly ensures that the dryer heats up efficiently and safely, playing a vital role in the overall performance and reliability of the appliance. 

The need for replacement can stem from wear and tear, functional degradation, or issues with gas flow regulation.

Symptoms of a faulty Valve & Burner Assembly include:

• Insufficient or no heat production in the dryer.
• Unusual noises or smells indicating gas leakage or improper combustion.
• The dryer takes longer to dry clothes, indicating inefficient heating.
• The dryer failed to start the heating cycle.
• Visible signs of wear or damage to the assembly components.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This white front panel restores the visible exterior and protects the control area on compatible GE ranges. It replaces cracked, dented or discolored panels to give the appliance a clean, finished appearance and support for mounted components. What it does:

• Covers and protects the control console and internal components from spills, heat, and impact
• Restores worn or damaged cosmetic finish and helps the range look like new again
• Provides the proper mounting surface and alignment for trim and controls
• Helps prevent debris from entering internal compartments that can affect operation

• Disconnect power (and gas if applicable) before starting any service to avoid shock or injury
• Remove the existing front panel by removing retaining screws; handle edges carefully to avoid cuts
• Reuse original mounting hardware unless new hardware is explicitly included

This complete dryer drum assembly replaces the rotating tub that holds and tumbles clothes, restoring proper drum movement and drying performance. Fits compatible GE/TAPPAN dryers and brings back secure, balanced load tumbling. What it does:

• Replaces the dryer's spinning drum so clothes tumble freely during cycles
• Restores even airflow and contact with the heating element for consistent drying
• Stops squeaks, scraping, or grinding caused by a damaged or warped drum
• Helps eliminate clothes catching or rubbing on drum edges that can cause wear

• One complete dryer drum assembly

• Disconnect power before servicing; this part requires panel and/or front removal
• Use basic hand tools; lifting the drum may require two people to avoid strain
• Inspect glide rings, rollers, seals, and belt while replacing the drum and replace as needed

This motor support is the stamped metal bracket that secures the dryer motor and blower assembly, keeping components aligned for smooth operation. It restores proper motor mounting and reduces noise from loose or misaligned parts. What it does:

• Holds the dryer motor and blower housing in the correct position to prevent wobble or misalignment
• Helps maintain proper blower alignment for effective air movement
• Supports safe, reliable motor operation when the original bracket is bent, cracked, or worn

• Disconnect power (unplug electric or shut off gas and breaker) before beginning repair
• Access requires opening the dryer cabinet and removing the drum and/or front panel on many models
• Inspect related components (motor mounts, blower wheel, idler, belt) and replace if damaged

This gasket is a direct-fit door seal that restores the appliance's airtight closure to help maintain proper temperature and reduce energy loss. It replaces worn, torn, or compressed seals to improve performance. What it does:

• Creates an airtight seal around the door to keep conditioned air inside
• Helps prevent warm air intrusion, frost buildup, and excess cycling
• Reduces condensation and keeps food at intended temperatures
• Restores efficient operation when the original seal is cracked or deformed

• One door gasket

• High-level replacement: remove the old gasket, clean the gasket channel, then align and press the new gasket into the channel until fully seated
• Inspect gasket mounting tabs or retainer channels and reuse any clips or screws if applicable
• Work with the appliance powered off; unplug or switch off power for safety where appropriate
• If the gasket feels stiff, warm it gently for easier fitting; avoid sharp tools that could damage the new gasket

This combustion chamber is the metal housing that surrounds and directs the gas burner flame in a gas dryer, protecting surrounding components and guiding combustion for reliable heating performance. What it does

• Houses and aligns the burner assembly and igniter to ensure proper flame direction
• Channels exhaust and combustion flow away from sensitive parts
• Helps prevent heat damage to the dryer cabinet and nearby components
• Symptoms this can fix: poor or uneven heating, burner flame misalignment, or burner noise from loose housing

• One combustion chamber housing

• Turn off and unplug the dryer and shut off the gas supply before servicing
• Inspect and replace any damaged gaskets or mounting hardware for a proper seal
• Use basic hand tools; avoid bending or deforming the chamber during installation