Gte181shdrss Parts

The Water Valve and Tube Assembly is an OEM replacement part for GE side-by-side refrigerators. It serves as the inlet valve installed inside the fresh food compartment. 

Causes of a faulty assembly can include mineral buildup inhibiting proper valve opening or cracking/splitting of aging plastic tubes. Electrical issues affecting the valve solenoid may also develop over time.

Symptoms of a problematic assembly include:

• Ice maker or water dispenser unable to consistently produce ice/water  
• Leaks present around the rear inlet area
• Valve components failed to activate 

Compatible models also include Profile and Monogram side-by-side refrigerators.

This kit replaces the mounting hardware that secures a refrigerator/freezer door handle to the door, restoring a solid, safe grip and clean appearance when the original fasteners are missing, damaged, or stripped.

• Provides the correct hardware to attach and secure the door handle
• Helps resolve loose, wobbly, or detached handles
• Replaces missing, damaged, or stripped handle fasteners
• Supports proper handle alignment and feel

• Disconnect power (and water, if applicable) and wear gloves.
• Support the handle while removing old hardware to prevent drops or scratches.
• Start threads by hand to avoid cross-threading; tighten evenly and do not overtighten.
• The handle is secure and the door opens/closes normally.

The Ice Bucket is an OEM part for GE refrigerators. It is a component that stores ice from the icemaker in the freezer compartment. The ice bucket allows for convenient access to ice on demand, fitting seamlessly within the refrigerator design.

Symptoms of a bad ice bucket include:

• Cracks or damage to the plastic material
• Inability to easily remove or insert the bucket  
• Ice falling out of the bucket improperly
• Missing parts like the handle

Note: This is just the ice bucket. It does not include other ice maker components.

Replace your worn ice bucket before further issues arise like ice spilling in the freezer. This OEM GE part restores your refrigerator’s storage and access to ice. It is also compatible with Hotpoint, RCA, and Kenmore refrigerators.
 

The GE Door Handle Set is an OEM replacement part for various GE refrigerator models. Restore the appearance and functionality of your GE refrigerator with this high-quality, affordable replacement part. It includes both the freezer and refrigerator handles and is white in color.

Causes of a bad part:

• Wear and tear from daily use
• Damage from accidental impact
• Exposure to extreme temperatures

Symptoms of a bad part:

• Difficulty opening or closing the refrigerator door
• Loose or wobbly handle
• Cracks or visible damage on the handle

This white plastic door handle replaces a broken or worn handle on compatible refrigerators, restoring a secure grip and a clean, factory look so you can open and close the door confidently.

• Provides the handhold used to open and close the refrigerator door
• Replaces cracked, broken, loose, or missing handles to improve safety and appearance
• Attaches to existing mounting points with model-specific fasteners or set screws
• Helps eliminate wobble or rattling caused by a damaged handle

• Disconnect power at the breaker before starting for safety
• Support the handle while loosening existing fasteners; note their positions and orientation
• Align the new handle; start screws by hand, then tighten evenly without overtightening
• If your model uses trim caps, install them after tightening

The Fresh Food Wire Shelf is an OEM component specifically designed for GE refrigerators. This shelf provides storage space and organization within the fresh food compartment. 

The wire construction allows for maximum airflow while neatly containing and separating different food items. It flexibly adjusts to fit various packaging sizes and quantities. 

Symptoms of a faulty shelf include:

• Sagging or bowing unable to hold weight 
• Brittle wires susceptible to breaking
• Rust or deterioration reducing strength
• Scratches or patches interfering with cleaning

Causes stem from extended use accumulating wear on the metal wires and racks. Prolonged exposure to moisture in the fridge can also lead to corrosion.

This shelf plays a key role in maximizing storage potential and maintaining the ventilation required to keep foods fresh longer. Replace yours today with this OEM GE part for continued convenience. It is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Capacitor is an OEM component specifically designed for GE refrigerators with bottom-mount freezers. Located inside near the compressor unit, it aids in powering the refrigerator system during startup.

Causes of a bad capacitor include normal wear from thousands of startup cycles. Exposure to moisture or fluctuating voltages over many years can diminish performance.

Symptoms of a failing capacitor include:

• Inconsistent cooling or inability to lower temperatures
• Buzzing or humming noises from inside the fridge 
• Repeatedly tripping the power breaker 

Replacing with this genuine GE capacitor restores reliable operation. Compatible with GE bottom-freezer models, it features reliable aluminum electrolytic construction. Backed by GE quality, this replacement ensures smooth powering of the compressor for efficient cooling cycles. Compatible replacements are also available for GE Profile and GE Cafe series refrigerators.
 

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Defrost Heater Assembly is an OEM replacement part for GE refrigerators. This assembly is responsible for preventing the buildup of ice and frost on the evaporator coils by providing controlled heat during the defrost cycle. It helps prevent ice accumulation that can hinder the refrigerator's ability to cool properly.

A bad defrost heater assembly can occur due to electrical issues, component failure, or damage to the heating element. If you notice symptoms such as excessive frost or ice buildup in the freezer compartment, inconsistent cooling, or water leaking from the refrigerator, it may indicate a need to replace the defrost heater assembly.

Symptoms of a bad defrost heater assembly include:

• Excessive frost or ice buildup in the freezer compartment
• Inconsistent cooling
• Water leaking from the refrigerator

Restore your refrigerator by replacing the faulty defrost heater assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This compressor start kit provides the overload protector and PTCR starting device used to help refrigerator compressors start and protect against electrical overloads. It replaces failed start components to restore reliable compressor starting. What it does:

• Supplies a PTCR (positive temperature coefficient resistor) starter to give the compressor the initial starting boost.
• Includes an overload protector that helps prevent compressor damage from electrical overload or overheating.
• Common symptom linkage: may be needed when the compressor hums but won't start, the fridge cycles without cooling, or the compressor repeatedly clicks/trips.
• Works with compressors that use separate PTCR and overload start components.

• Disconnect power to the appliance at the breaker or unplug before servicing.
• Installed at the compressor terminals; follow OEM wiring orientation and secure connections.
• Test compressor and start circuit after installation to confirm proper operation.

The Grommet Water Fill Assembly is an OEM component specifically designed for GE top-mount refrigerators. It is located at the back of the fresh food compartment and consists of the water inlet grommet that channels water from the external line.

During use, causes of failure can include mineral buildup on the filter over time inhibiting proper water flow. Deterioration of the inlet grommet seal may also occur.

Symptoms of a bad water fill assembly include:

• Slow or incomplete filling of the internal water tank  
• Leaks occurring at the rear water inlet connection point
• Mineral deposits building up within the internal waterways

This OEM GE replacement ensures a secure seal and mesh filtration for clear, contaminant-free water going to the dispenser. It maintains proper filling and is also compatible with Hotpoint, RCA, and some Kenmore models.

This compressor start device is the overload/PTC relay combo that mounts on the compressor. It delivers the initial start boost and protects against overheating so your refrigerator starts reliably and maintains proper cooling.

• Provides start assistance to the compressor, then disengages once the motor is running
• Integrated overload opens on overcurrent/overheat to protect the compressor
• Common failure symptoms: not cooling, compressor won't start, rapid clicking or buzzing from the rear, intermittent cooling
• Mounts directly to the compressor terminals for a secure, correct connection

• Disconnect power and allow the compressor to cool before servicing
• Remove the rear access cover; note wire orientation
• Pull the old device straight off the compressor pins; push the new assembly fully onto the pins until seated
• Restore power and confirm the compressor starts smoothly

This rear access cover replaces the panel that protects and conceals components at the back of the refrigerator cabinet. It restores the finished appearance and helps keep dust and debris away from electrical and service areas. What it does:

• Covers and shields rear-mounted components and wiring from dust, dirt, and accidental contact
• Helps maintain a finished exterior at the rear of the cabinet after service or component replacement
• Reduces the chance of loose debris or small tools contacting internal parts during operation
• Restores proper access panel fit for service technicians and future maintenance

• One rear access cover panel

• Disconnect power to the appliance before attempting any service
• Typically secures with screws; keep original fasteners or use OEM-specified hardware
• Move the appliance away from the wall for safe access and stable working space
• Replace any damaged clips or screws to ensure a secure fit and proper protection

This genuine fastener secures appliance components such as panels and brackets. Replacing a missing or stripped screw restores proper fit and helps reduce vibration or rattling. Features 12-24 threads and an approximate 0.785-inch length. What it does:

• Fastens panels, brackets, covers, and other hardware points in the appliance
• Helps maintain proper alignment and a tight fit of components
• Replaces damaged, stripped, or missing hardware
• Common symptoms include loose or rattling parts and hardware that won't tighten

• One screw

• Disconnect power before servicing; shut off water supply if working near water components
• Start the screw by hand to avoid cross-threading; replace one-for-one in the original location
• Use the correct driver bit for the head style; tighten snugly without overtightening into plastic or thin metal

This control housing is the outer console frame that holds the oven/range control board and user interface, restoring a clean, secure mounting for switches, buttons and the display. It helps keep controls aligned and protected for reliable operation. What it does:

• Secures the electronic control board and control panel components in the appliance console
• Keeps buttons, knobs and display window properly aligned and protected from debris
• Helps prevent intermittent button or display contact caused by a loose or cracked housing
• Addresses symptoms like loose or rattling controls, misaligned buttons, or visible cracks in the console

• Disconnect power (unplug appliance or shut off breaker) before starting any repair
• Remove screws and any trim pieces to access the control housing; handle plastic parts gently to avoid cracking
• Support the control board and wiring when removing the housing to avoid strain on connectors

The Water Tube is an OEM replacement part for GE refrigerators. It is responsible for delivering water to the dispenser and ice maker, ensuring a steady flow of chilled water and ice cubes.

A bad water tube can occur due to wear and tear over time or damage caused by mishandling or accidents. If you notice symptoms such as water leaks, reduced water flow, or ice maker malfunctions, it may indicate a need to replace the water tube.

Symptoms of a bad water tube include:

• Water leaks or drips from the dispenser or ice maker
• Reduced water flow or weak water pressure
• Inconsistent ice production or ice cube quality

Restore your refrigerator by replacing the faulty water tube with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.