Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement freezer door shelf support bar for refrigerators. Holds door bins and shelves in place. Replace if cracked, broken, or warped plastic causes shelving to sag.
Mounts the evaporator fan assembly inside the freezer compartment. Replace if cracked, broken, or damaged from repeated fan motion or temperature stress.
WE REPLACED THE FAN MOTOR, FAN, MOUNTING BRACKETS, AND GROMMETS. Read more
Fix a refrigerator that won't defrost or has an iced-up evaporator coil. This defrost control board manages defrost cycles to prevent frost buildup.
The defrost heater element looked good and had continuity. The defrost thermostats checked good, so that just left the Defrost Module as the likely suspect. I installed a new defrost control module and thermostats. The thermostats were inexpensive and the old ones could have been intermittent, The only "tricky" part was finding out how to get to the back screw that holds the main control panel. Discovered that the return air duct surrounding the control panel needed to come off. It helps... Read more
Small washer that fits on refrigerator door hinges to distribute weight and reduce friction. Replace if worn, cracked, or missing to restore proper alignment.
New Door Handle and the plastic spacers Read more
Replacement freezer door shelf bar for top-mount refrigerators. Securely holds adjustable door shelves. Replace if cracked, broken, or missing.
Easy fix. Read more
Secure refrigerator panels, handles, shelves, and internal components with this mounting screw. Replace worn, stripped, or missing screws easily.
Ice maker not producing ice or won't dispense cubes? This complete ice maker assembly replaces failed units. DIY-friendly install in under 10 minutes.
I found that the Ice Maker in my GE side by side made ice but would not kick out the ice when it had formed, the heating element or the switch that controls it didn't work. I ordered a new ice maker switched it out took less than 3 minutes. The cord was very stiff and just long enough but I got it to connect and in 35-40 minutes I had fresh ICE!! Read more
Fix no ice production or water dispenser issues with this refrigerator water inlet valve. Controls water flow to ice maker and dispenser. Moderate DIY.
Clear plastic cover that sits over the crisper drawer to maintain humidity for fruits and vegetables. Replace if cracked, broken, or missing.
I ordered the part and they sent it immediately... Read more
Wire shelf for refrigerator freezer compartment. Replace bent, rusted, or missing shelves to restore storage capacity and keep frozen items organized.
I called and ordered another wire shelf. Read more
This relay and overload kit helps start your refrigerator's compressor motor and protects it from electrical damage. It provides the initial power boost needed for the compressor to begin cooling and cuts power if the motor overheats. Replace this kit when your refrigerator stops cooling, runs constantly, or makes clicking sounds without starting.
Replaced TSD combo. Read more
Seals freezer door to keep cold air in and moisture out. Replace if worn, cracked, or causing frost buildup. Confirm fit with your model number.
I checked the freezer and found the door gasket was damaged. When the parts arrived, I checked them for a good fit and the attachment method. Due to past experience of replacing door gaskets, I was expecting a lot of screws that would have to be removed and replaced. To my surprise, the gaskets pressed in place without tools and had a good and secure fit. The instructions the came with the gaskets suggested the hot water be used as needed to remove any kinks that might cause a poor fit. I... Read more
Rear mounting bracket that secures the evaporator fan in your refrigerator. Replace if bracket is cracked, bent, or broken, causing fan misalignment.
I watched the video AppliancePartsPros.com provided and was done in less than an hour after receiving the parts. Easy-Peasy! No more middle-of-the-night "popping" of the fan blades hitting the evaporator motor's mounting bracket. Read more
This is a grommet and gasket assembly that seals the ice maker water fill tube where it passes through the freezer wall. It prevents warm air from entering the freezer compartment and stops moisture from building up around the fill tube opening. Replace this assembly if you notice frost or ice buildup around the fill tube entry point, water leaking near the ice maker, or if the existing grommet is cracked or deteriorated.
Replaced water line from valve to ice maker Read more
Ice not dispensing or spilling in freezer? This refrigerator ice bucket stores ice from your ice maker. Easy DIY installation. Video available.
Ordered new tray. Read more
Fix freezer ice buildup and warm fridge temps with this defrost heater. Melts frost from evaporator coils during defrost cycles. Moderate DIY repair.
Heater defroster part number AP5982425. I have GE model GTE16DTHCRBB. I found a Youtube video of a repair of a similar model. Getting the heater defroster out was not a piece of cake because you can not see the mounting due to it being behind the coils, same is true for reinstalling the new. There is a strap on top of the heater defroster that has to be connected to the heater defroster before being reinstalled. It kept falling off as I tried pushing the defroster back into the mounting... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.