Gts22kyncrfs Parts

The Control Knob is an OEM part for GE refrigerators. This knob is responsible for adjusting and controlling various settings on your refrigerator, such as temperature or function selection.

A bad control knob can be caused by normal wear and tear, accidental damage, or a malfunctioning internal mechanism. If you experience difficulties in accurately adjusting or selecting the desired settings on your refrigerator, it may be time to replace the control knob.

Symptoms of a bad control knob include:

• The knob feels loose or wobbly when turned
• Inaccurate temperature adjustments
• The knob gets stuck or does not turn smoothly
• The knob is cracked, broken, or missing

Replace your faulty control knob with this genuine OEM part to restore your refrigerator. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This handle mount bushing supports and spaces a refrigerator door handle on its mounting stud, keeping the handle aligned and secure. Replace a cracked or missing bushing to eliminate wobble and restore a tight, flush handle fit.

• Centers the door handle on its mounting stud/post
• Maintains proper spacing so the handle sits flush to the door
• Provides a solid seat for handle fasteners to hold securely
• Failure can cause a loose, wobbly, or misaligned handle

• Open the door and support the handle; protect the finish with tape or a cloth
• Loosen the handle fasteners (set screws or similar) and lift the handle off the studs
• Remove the damaged bushing; seat the new bushing fully on the stud or in the handle base
• Reinstall and align the handle; tighten fasteners evenly without overtightening

This small hardware clamp is used on select refrigerators to secure tubing or wiring to the cabinet or frame. Replaces a missing or damaged clamp to keep lines stable, reduce vibration, and help prevent rubbing or leaks.

• Secures small water tubing or electrical harnesses along the cabinet/frame
• Helps prevent vibration, rattling, and abrasion of lines
• Maintains correct routing to keep lines clear of moving or hot components
• Common clues: loose or noisy lines, chafing marks, or moisture near tubing connections

• Unplug the appliance and shut off the water supply before servicing
• Note the original location and routing; take a photo for reference
• Reuse the existing mounting screw/fastener if required; tighten only enough to hold without crushing tubing
• Restore power and water, then run and inspect for vibration and leaks

This hex-head screw secures dishwasher panels, brackets, and internal hardware so parts stay tight and rattle-free. Replace missing or stripped fasteners to restore a secure fit and reliable operation.

• Fastens panels, brackets, and other dishwasher components to the tub or frame
• Replaces a missing, stripped, or corroded screw that no longer holds securely
• Helps eliminate vibration and rattling caused by loose hardware
• Maintains proper alignment and secure mounting of parts during operation

• Disconnect power and shut off water supply before servicing
• Keep track of fastener locations and orientation for correct reassembly
• Start threads by hand; use an appropriate nut driver or socket to tighten
• Tighten snugly—do not overtighten, especially when threading into plastic

This gasket supply foam is a replacement foam seal strip used to restore a refrigerator door or cabinet seal cushion for a tighter fit and improved temperature control. It helps reduce drafts and keeps fresh food fresher. What it does:

• Replaces worn or compressed foam that can allow air leaks around the door or compartment
• Restores the gasket's shape and cushioning to improve door sealing performance
• Helps reduce humidity build-up and cycling from frequent compressor starts
• Addresses symptoms such as visible gaps, cold loss, frost buildup, or higher energy use

• Remove old foam and any adhesive residue before installing the new strip
• Use appropriate gasket adhesive and follow manufacturer instructions if required
• Work with the appliance unplugged or power turned off; keep fingers clear of pinch points

A top door hinge and pin assembly that supports the refrigerator/freezer door and lets it pivot smoothly for reliable opening and closing. Replaces a worn or damaged top hinge to restore proper door alignment and seal. What it does:

• Provides a durable pivot point so the door swings open and closed smoothly
• Restores proper door alignment to help the gasket seat and maintain cooling
• Stops squeaks, sticking, or uneven door movement caused by a worn hinge
• Supports the door weight to prevent sagging or dragging

• One hinge top and pin assembly

• Disconnect power to the appliance before starting work and keep stored food safe
• Remove items from the door and support the door while replacing the hinge (two people may be needed)
• Retain any mounting screws; replace only parts explicitly shown in OEM documentation

Specs: 8-32 ca hxw 1/2

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

This metal compressor mounting clip secures the refrigerator compressor to the base, helping keep the unit stable and reducing vibration transfer. Replaces a worn or broken clip to restore proper compressor alignment and quieter operation. What it does:

• Secures the compressor to the cabinet/base to prevent movement during operation and transport
• Helps reduce vibration and rattling that can indicate a loose or damaged mount
• Keeps the compressor aligned so refrigerant lines and mounting hardware remain correctly positioned
• Useful when the original clip is bent, cracked, or missing

• One compressor mounting clip

• Disconnect power to the appliance before beginning any repair
• Support the compressor before removing or installing the clip to avoid strain on lines or fittings
• Use appropriate hand tools; avoid over-tightening fasteners which can cause damage
• Replace rubber grommets or insulation if present and damaged for best vibration isolation

Note: This control board includes the LED Lights for the refrigerator.

The Main Control Board is an OEM part for GE refrigerators. As the "brain" of the unit, it oversees operations of temperature controls, lighting, dispensers, and cycling to maintain freshness.

Causes of malfunctions involve cumulative chip degradation under high system demand over a refrigerator's lifespan. Exposure to moisture may corrode sensitive areas over time as well.

Symptoms include:

• Unresponsive touch panels and displays  
• Inability to regulate temperatures as programmed 
• Recurring errors requiring repeated door openings

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Ice Bucket is an OEM part for GE refrigerators. It is a component that stores ice from the icemaker in the freezer compartment. The ice bucket allows for convenient access to ice on demand, fitting seamlessly within the refrigerator design.

Symptoms of a bad ice bucket include:

• Cracks or damage to the plastic material
• Inability to easily remove or insert the bucket  
• Ice falling out of the bucket improperly
• Missing parts like the handle

Note: This is just the ice bucket. It does not include other ice maker components.

Replace your worn ice bucket before further issues arise like ice spilling in the freezer. This OEM GE part restores your refrigerator’s storage and access to ice. It is also compatible with Hotpoint, RCA, and Kenmore refrigerators.
 

The Capacitor is an OEM component specifically designed for GE refrigerators with bottom-mount freezers. Located inside near the compressor unit, it aids in powering the refrigerator system during startup.

Causes of a bad capacitor include normal wear from thousands of startup cycles. Exposure to moisture or fluctuating voltages over many years can diminish performance.

Symptoms of a failing capacitor include:

• Inconsistent cooling or inability to lower temperatures
• Buzzing or humming noises from inside the fridge 
• Repeatedly tripping the power breaker 

Replacing with this genuine GE capacitor restores reliable operation. Compatible with GE bottom-freezer models, it features reliable aluminum electrolytic construction. Backed by GE quality, this replacement ensures smooth powering of the compressor for efficient cooling cycles. Compatible replacements are also available for GE Profile and GE Cafe series refrigerators.