Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fixes washer that won't spin or shows error code 26. This speed sensor monitors drum rotation for proper spin cycles. DIY-friendly, 15-30 minute repair.
I found a YouTube video, order the parts about midnight Saturday and-they came in the mail before lunch on Tuesday. I laid the washer on the rear panel, removed both pulleys to clean them, installed the speed sensor. bolted the pulleys back in place, installed the new belt-making sure it was centered and everything moved freely, and attached the belt/pulleys cover. I set the washer back up, reattached the water lines, placed the drain tube, and plugged in back in. Works like new !!! 30 minutes... Read more
The Washing Machine Screw is an OEM replacement part for GE washing machines. This screw is used to secure various components within the washing machine, such as the drum, control panel, or housing. While it may seem like a small part, the screw plays an important role in maintaining the structural integrity of the machine.
Causes for a bad or missing screw can include corrosion, loosening due to vibrations during wash cycles, or it may simply be missing due to repairs or disassembly.
Symptoms of a bad or missing Washing Machine Screw include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I had to replace the agitator. I previously purchased one about 6 months ago from another online vendor. I was shocked when comparing the build quality between the two, the competitor uses a plastic spline on the agitator while AppliancePartsPros.com had a metal spline. You learn as you go, I will always use parts from this vendor from now on, great build quality. Thanks Read more
Transmission pulley and nut for top-load washers. Transfers motor power to the drum for spinning and agitation. Replace if cracked, worn, or damaged.
Replaced thr motor pulley and transmission pulliey and belt. Read more
The Hub nut is an OEM part for GE washing machines, designed to securely fasten the tub assembly to the drive system of the washer. This component is crucial for the stability and operation of the washing machine's drum, ensuring that it remains properly aligned and attached during the vigorous motion of the wash cycles.
Per the manufacturer due to the high torgue on the hub nut an impact wrench should be used to remove and replace the hub nut. It also rquires a 90 ft lb torque limiting extension WX05X10028 and a 1 5/16th impact socket WX05X10022. You can order these through the links or use ones you already have. WARNING: The 90 ft lb torque limiting extension must be used when removing or installing the hub nut to prevent damage to the hub nut and transmission due to over torquing with the impact wrench. Causes of these issues can range from natural wear and tear over time to improper installation or overloading of the washer, which can exert undue stress on the Nut Hub and other related components. Ensuring that the Nut Hub is in good condition and properly tightened is essential for the longevity and proper function of your GE washing machine. Symptoms of a faulty Hub nut include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
First it was covered under warranty. They sent a repair person out and he said it had an extra washer holding the tub down to the transmission. He removed the washer and it worked for about a month then the same thing started happening again. I took the washer apart and realized it was missing the washer hub which holds the tub off the bottom. Problem is fixed now, go GE. Maybe include all the parts in your washing machines. Read more
Motor pulley with nut for top-load washers. Transfers power from motor to drum. Replace if pulley teeth are stripped, cracked, or sheared off.
Fix fabric softener not dispensing properly with this washer dispenser cup. Replaces broken or cracked dispensers. Easy 20-minute DIY installation.
Received repair parts very fast delivery. Easy fix! Read more
Motor pulley for washer drive systems. Mounts on the motor shaft to transfer power to the drum. Replace if cracked, stripped, or threads are damaged.
Replace motor pulley, belt, mode actuator, clutch gear, spring clutch, and transmission pulley. Read more
Washer bouncing or grinding? The hub connects the tub to the transmission. Moderate DIY repair requires removing the agitator and aligning spindle teeth.
Fix grinding noises during agitation with this washer hub nut washer. Secures the hub and keeps the drum aligned during wash and spin cycles.
Using repair help suggestions from other users and youtube, I narrowed it down to the transmission (part #320) mainly because it was a metal-to-metal noise. The parts came in one day, thank you AppliancePartsPros.com. I installed the transmission but the noise was still there. Unfortunately, I didn't investigate enough and found a youtube video that suggested it could be the mode shifter (part #325) and that's what it was. I still saved money because having a service tech fix this problem... Read more
Fix washer leaking during drain cycle with this drain pump seal. Prevents water leaks between pump and tub. Easy DIY repair, takes about 30 minutes.
I replaced the drain pump and replaced the belt while I was under there since I noticed some shreds on the ground when I was investigating the problem originally. I am a girl and it was fairly easy to diagnose. I found the codes listed on the paper that’s taped inside the washer. There’s a service mode I was able to enter and that opened up the test mode. Every test was successful except for the drain test. So I entered my model on this site and was able to find the parts I needed Read more
Fix a washer that won't start or has a blinking lid lock light with this lid lock wiring harness. Connects the lid lock to the control board. Easy DIY fix.
How the directions showed me. It was very easy. Read more
Washer won't start or shows lid error? The lid lock bezel secures your lock mechanism. Simple press-in installation takes 25-30 minutes to restore function.
Noticed that lid lock light was not on, googled problem, ordered parts, working on 3rd day. Read more
Washer not heating water correctly or wonky water temperature? The thermistor monitors water temp during cycles. Common DIY fix, takes about 30 minutes.
After a few internet searches, it became clear that the most common fix for this issue is replacing the water inlet valve. My washer is about five years old, which aligns with the typical lifespan of these valves. I ordered the OEM parts for this washer, as this is not something you want failing and potentially flooding your home while you’re away. The thermistor is installed directly into the valve and uses an O-ring that is known to degrade and leak over time. Since the thermistor has to be... Read more
Fix washer shaking violently during spin cycle with this suspension rod upper ball joint. Common cause of unbalanced loads. DIY repair in 45 minutes.
I replaced all four upper ball joints and all four rod and spring assemblies. The washer loads now remain balanced during the spin cycle even with bulky items such as a kings sized blanket and a sheet and pillow set. I did the repair myself in less than 45 minutes total. This saved me from having to purchase a new washer. Read more
Replacement lid for top-load washers. Covers the drum opening to contain laundry during wash cycles. Install when original is cracked or broken.
I watched a YouTube video and fixed it without a problem Read more
Internal drain hose channels water from washer tub to external drain system. Replace if cracked, kinked, or leaking to restore proper drainage function.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.