Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Gtwn4560lows Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Drain Hose
Genuine Ge part
By: Ge
Part Number: WH41X374

The Drain Hose is an OEM part for GE washing machines. It is specifically designed to channel used water out of the washer and into the household drainage system. 

Causes of a bad drain hose can include physical damage from movement or installation, clogging from lint and debris, or degradation of the hose material over time, leading to leaks and inefficiency.

Symptoms of a bad Drain Hose include:

  • Water leaking from the back or underside of the washing machine
  • Pools of water around the area where the washing machine is installed
  • Signs of wear or damage to the hose, such as cracks, holes, or bulging

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Have water leak   Carl W. • Hopkins , MI • June 26, 2015

I did it Read more

More
Dial Asm
Genuine Ge part
By: Ge
Part Number: WH11X10060

 

Do-It-Yourself Stories from Customers like You The timer was faulty   Norman S. • Norfolk , VA • June 28, 2015

Replaced the timer, control knob, & dial assy. Read more

More
Drive Motor
Genuine Ge part
By: Ge
Part Number: WH20X10093

This genuine OEM part is a drive motor for washers. The drive motor is the main engine that drives the washer tub allowing it to rotate and wash clothes effectively. If the washer is no longer spinning or the power has significantly decreased, it might be a sign that the drive motor needs to be replaced. Luckily, replacing this part is a relatively simple repair.To replace the drive motor, start by unplugging the washer. Once unplugged, move the washer away from the wall to gain access to the back panel. Uninstall the back panel by removing the screws that attach it. After removal, locate the drive motor and proceed to unthread the mounting screws holding it to the washer. Proceed to pull the old motor out of its place and install the new motor by threading the screws that secure it. This replacement part is sold individually and is compatible with GE, RCA, and Hotpoint brand washers.

Do-It-Yourself Stories from Customers like You Filled up and ran through cycle but would not agitate or spin   David R. • Ada , OH • July 04, 2014

New motor. The motor was ok, but the control board mounted on the motor wasn't. Can't buy to control board separate from the motor. Easy to replace the motor, but not so easy to troubleshoot to make sure the problem was the motor and not something else. Read more

More
Washer Outer Tub Cover
Genuine Ge part
By: Ge
Part Number: WH49X21274

Outer tub cover that snaps over the washer's outer tub assembly. Replace if cracked, broken, or missing to restore proper clearance and protection.

Do-It-Yourself Stories from Customers like You Washer tub straps and part of cover tub broke   Edwin B. • Chicago , IL • October 13, 2014

I had to remove the front panel of the washing machine and top of the washing machine. i started by removing all the top screws as shown in one of videos. disconnected all the electrical wires (i have a commercial washer) and lifted the front panel over the back of the machine. i was then able to remove the top of the washing machine to give me access to the tub straps and the corresponding screws. i removed the broken straps and then was able to remove the tub cover by pushing down it down... Read more

More
Washer Motor And Inverter Assembly
Genuine Ge part
By: Ge
Part Number: WH20X10066

Washer won't spin or agitate? This motor and inverter assembly controls basket rotation and spin speed. Moderate DIY repair, 1-2 hours with tech sheet.

Do-It-Yourself Stories from Customers like You Flashing fill light with beep flashing 10 on motor card   Barry R. • Hummelstown , PA • August 22, 2016

It's always a tough decision on how much time and money to spend on an older $500 appliance. Besides fixing things being in my nature, Appliance Parts policy of allowing returns for any reason made the decision a lot easier. My 2+hour project time was due to lots of research and analyses trying to pin-point the exact cause. It still came down to a toss up between the control card and the motor. The control card did not fix, the motor did. Part replacement was in the 15 - 30 minute range. A... Read more

More
Dispenser Asm Fs
Genuine Ge part
By: Ge
Part Number: WH43X10039

 

Do-It-Yourself Stories from Customers like You Needed to replace the cup part of the dispenser because the plastic tabs that hold it were broken   Evelena S. • Rome , NY • December 21, 2015

Placed in new dispenser Read more

More
Cord Power Asm
Genuine Ge part
By: Ge
Part Number: WH19X10068

 

More
Wireform Hinge (Long)
Genuine Ge part
By: Ge
Part Number: WH1X2743

 

More
Washer Shipping Bar
Genuine Ge part
By: Ge
Part Number: WH46X344

This shipping bar was installed during appliance transport to secure moving parts and prevent damage. It should be removed before first use to allow proper operation of your washer's door mechanism. Remove this bar if your washer door won't open properly or if you hear rattling noises during operation.

More
Clamp Tub Outlet
Genuine Ge part
By: Ge
Part Number: WH01X10134

 

More
Switch Rotary
Genuine Ge part
By: Ge
Part Number: WH12X10461

 

Do-It-Yourself Stories from Customers like You Temperature control on clothes washer   Jonnie R. • Long Valley , NJ • July 20, 2014

Replaced obvious defective part with purchased item. Read more

More
Switch Rotary
Genuine Ge part
By: Ge
Part Number: WH12X10499

 

Do-It-Yourself Stories from Customers like You Washing machine transmission leaking oil   Mary M. • Cross Lanes , WV • May 17, 2016

Replaced transmission, all seals, and dampers. It is a complicated, messy repair but costs much less than replacing the machine. This is the second tranny I have put in the 30 year old machine and now it works like new. Take the time to replace all seals if you do this repair. No use putting a new tranny in with old seals that will crack. Read more

More
Terminal Housing
Genuine Ge part
By: Ge
Part Number: WH12X497

Harness to corset & shifter

More
Washer Balance Ring Assembly
Genuine Ge part
By: Ge
Part Number: WH45X10114

Counterweight ring that stabilizes the washer tub. Replace if cracked, leaking fluid, or damaged from friction wear to restore balanced spinning.

More
Terminal (12-Pack)
Genuine Ge part
By: Ge
Part Number: WD1X1434D

Includes 12 terminals.

Do-It-Yourself Stories from Customers like You Terminal receptacle was fried   Phillip M. • Indianapolis , IN • May 12, 2015

I had to replace the 3 terminals and try to put them in the new terminal receptacle. I replaced the lid switch because I broke the old one trying to diagnose the problem. I found the helpful video on this site after I had already started. Read more

More
Washer Control Knob Assembly
Genuine Ge part
By: Ge
Part Number: WH01X10647

Replace your washer's control knob assembly if cracked, broken, or missing. This component attaches to the control panel for cycle selection and settings.

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google