Gu2475xtv Parts

Set screw secures dishwasher door handle to panel. Replace if missing, stripped, or corroded to restore tight handle mounting and prevent loosening.

Complete dishwasher installation kit with mounting brackets, screws, and clamps. Replace missing or damaged hardware for secure undercounter installation.

Touch-up paint for appliances. Covers chips, scratches, and worn areas on range tops, refrigerators, and other appliances. Includes brush applicator.

Foam pad that installs between dishwasher door panels to dampen sound and shield from heat. Replace if torn, compressed, or missing for quieter operation.

This vent assembly is mounted on the dishwasher door or inner panel and allows steam and moisture to escape during the drying cycle. It typically includes a vent cover and internal flap mechanism that opens to release hot, moist air. Replace this part if you notice poor drying performance, excessive moisture remaining on dishes after a cycle, or if the vent flap is stuck, broken, or no longer opens and closes properly.

This is the circulation pump motor with an attached impeller that forces water through the spray arms during the wash and rinse cycles. It is the main pump responsible for water movement inside the dishwasher tub. Replace this assembly if dishes are not getting clean, the dishwasher fills with water but does not spray, or you hear a humming noise without water circulation.

White dishwasher rack repair kit includes 150 tine tips and vinyl paint to cover chipped, rusted, or worn rack tines. Extends rack life and prevents rust.

Secures water inlet tubing to create a leak-resistant seal. Replace if cracked, stripped, or unable to hold the line securely. Confirm fit with your model.

Insulation pad that fits behind dishwasher panels to restore thermal protection and reduce noise. Replace if damaged, missing, or rattling occurs.

Secures lightweight cups, lids, and small containers in your dishwasher rack. Replace when clips crack or lose grip. Confirm fit with your model number.

This replacement screw secures appliance panels and components so they stay tight and aligned. Replace a missing, rusty, or stripped fastener to restore a solid hold and reduce vibration or rattling during operation. What it does:

• Fastens and secures panels, brackets, trim, or internal components as specified for your model
• Replaces missing, corroded, or stripped hardware to restore a proper fit
• Helps prevent vibration, rattling, and misalignment caused by loose fasteners
• Addresses issues like a loose panel/handle or a screw head that's rounded off

• 1 screw

• Disconnect power; if applicable, shut off gas and water before servicing
• Use the correct driver size; start by hand to avoid cross-threading
• Tighten snugly—do not overtighten into plastic or thin sheet metal
• Keep track of original screw locations and lengths during reassembly

Replacement 8-32-thread screw used to secure panels, brackets and small components in compatible household appliances. Restores missing or stripped fasteners so panels and parts stay firmly attached during normal use. What it does:

• Secures trim, panels, brackets and control housings to maintain proper assembly.
• Replaces missing or damaged screws that can cause rattling, loose panels or misaligned components.
• Fits locations that require an 8-32 threaded fastener; correct length and head style for your application.
• Helps restore stable, vibration-free operation when worn or stripped fasteners are replaced.

• Disconnect power and water before servicing; wear eye protection and gloves.
• Use the correct screwdriver or driver bit to avoid stripping the screw head.
• Do not overtighten—turn until snug and secure to avoid damaging threads or surrounding parts.
• If the original used a washer or nut, reuse or replace as needed and the screw length and head type match the original.

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

This is the lower spray arm assembly that sits at the bottom of the dishwasher tub and rotates during the wash cycle to spray water onto dishes. It distributes pressurized water through small nozzle holes to clean the items on the lower rack. Replace this arm if dishes on the bottom rack are not getting clean, if the spray holes are clogged or damaged, or if the arm is cracked and no longer spins freely.

This adjustable leveling leg threads into the appliance base to set height and stabilize the cabinet. Replacing a worn or missing leg helps stop rocking and vibration and helps maintain proper alignment for reliable operation.

• Provides adjustable support at one corner of the appliance
• Helps level the unit for correct alignment with floor or cabinetry
• Reduces rocking, vibration, and rattling noises
• Replaces stripped, bent, cracked, or missing leg

• Disconnect power and, if applicable, shut off water before servicing
• Carefully support or brace the appliance to access the base safely
• Start the new leg by hand to avoid cross-threading; adjust height gradually
• Use a level to check side-to-side and front-to-back, then recheck after positioning

Size: 8-18 x 1/2 inch.