Gud24gssmww Parts

This washer selector assembly sits behind the control panel and houses three switches for choosing cycle options. It restores reliable input so your selections register correctly and the control applies the settings you choose. What it does

• Provides three selector switches for cycle options on the control panel
• Sends user selections to the main control for proper cycle operation
• Common failure symptoms include unresponsive or intermittent buttons
• May cause settings to change unexpectedly or not hold
• Can contribute to a no-start condition if inputs aren't detected

• One 3-switch selector assembly

• Unplug the washer before servicing; electrical components are inside the console
• Remove console trim/screws to access the selector assembly
• Label or photograph wire connectors; move harnesses to the new assembly and seat fully
• Handle electronics with ESD care; test functions before reassembling the console

The Basket Kit is an OEM part for GE washing machines. It includes the inner wash basket, which holds the clothes during the wash and spin cycles. This basket is designed to withstand the rigors of heavy loads and constant use, ensuring efficient and effective cleaning while maintaining the integrity of the clothes being washed.

Causes of a bad Basket Kit can include prolonged exposure to harsh detergents, physical damage from overloading or sharp objects, and general wear and tear from frequent use. 

Symptoms of a bad Basket Kit include:

• Unusual noises during the wash or spin cycles, such as banging or rattling
• Visible cracks, breaks, or rust spots on the basket
• Clothes coming out torn or snagged after washing
• The washer not spinning or draining properly due to basket issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This washer clutch engages the drive system to spin the basket, providing controlled engagement so loads reach proper spin speed smoothly. Replacing a worn clutch can restore spin performance and reduce noise for better-extracted laundry.

• Transfers drive power to the basket during spin
• Modulates engagement to prevent harsh starts and protect the drive
• Failure may cause no or slow spin, clothes coming out wet, or intermittent spinning
• Can also present as squealing, grinding, or a burning odor during spin

• Disconnect power and water supply before service
• Safely access the drive assembly per your model (often from below or rear) and support the appliance
• Remove retaining hardware, swap the clutch, and reassemble components in their original order
• Run a spin/diagnostic test after installation to ensure smooth operation

The Rod Assembly is an OEM part for GE washing machines. It consists of the shaft and drive rod that connects the motor to the tub's agitator or impeller. As such, it plays an integral role in facilitating the transmission of power from the motor to drive the agitation and washing action.

Causes of a bad rod assembly can include cracks, bends, or breaks from stress and fatigue due to extensive use over time.  

Symptoms of a bad rod assembly include: 

• No agitation or spinning despite the motor running 
• Excessive vibration and noise from the tub area
• Disconnected or slipping components between the motor and tub

This OEM GE replacement rod assembly is also compatible with some Hotpoint, RCA, and Kenmore models. 

This replacement blower wheel for a dryer mounts to the drive motor and pulls air through the drum, lint filter, and exhaust, restoring proper airflow so loads dry efficiently and the appliance runs as intended. What it does:

• Spins with the motor to move air through the drum, lint screen, and exhaust duct
• Maintains airflow needed for even drying and temperature control
• Wear, cracks, or a stripped hub can cause long dry times and weak vent airflow
• Damage or imbalance may produce rattling, scraping, or vibration noises from the blower area

• 1 blower wheel

• Disconnect power; turn off gas supply for gas models before servicing
• Access the blower housing and remove the old wheel from the motor shaft per your model's design
• Clean lint and debris from the blower housing and exhaust duct while open
• Seat the new wheel fully and verify free rotation without rubbing before reassembly

The Rod Assembly is an OEM part for GE washing machines. It consists of the shaft and drive rod that connects the motor to the tub's agitator or impeller. As such, it plays an integral role in facilitating the transmission of power from the motor to drive the agitation and washing action.

Causes of a bad rod assembly can include cracks, bends, or breaks from stress and fatigue due to extensive use over time.  

Symptoms of a bad rod assembly include: 

• No agitation or spinning despite the motor running 
• Excessive vibration and noise from the tub area
• Disconnected or slipping components between the motor and tub

This OEM GE replacement rod assembly is also compatible with some Hotpoint, RCA, and Kenmore models. 

The Harness Lid Lock is an OEM replacement part for GE washing machines. It is responsible for securely locking the washer lid during operation, preventing the lid from opening while the machine is in use. 

Symptoms of a faulty harness lid lock include:

• Lid not locking or unlocking
• Error codes related to the lid lock system
• Inability to start the washing cycle

A bad harness lid lock can be caused by wear and tear over time, electrical issues, or accidental damage. If you experience problems such as the lid not locking or unlocking properly, or error codes indicating a lid lock failure, it may be necessary to replace the old or damaged harness lid lock with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The UPPER BALL JOINT is an OEM component specifically designed for GE washers. It is found on the center post of the tub and allows the outer tub to pivot front to back during agitation cycles. This precise movement helps optimize cleaning performance by maximizing water and pressure distribution.

Causes of a bad upper ball joint can include wear and tear over time, damage due to impact or misalignment, or unbalanced loads that put added stress on the joint. 

Symptoms of a bad upper ball joint include:

• Excessive noise or squeaking coming from the center post area
• Hampered or sluggish movement of the outer tub during washing  
• Leaks developing around the center post 

Replace yours today with this genuine OEM GE part for reliable front-to-back agitation and smooth cycle operation. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement screw secures dryer panels and assemblies, helping prevent vibration and keeping components properly aligned. Use it to replace missing or stripped hardware and restore a solid, factory-tight fit during reassembly.

• Secures panels, brackets, and internal assemblies in the dryer cabinet
• Replaces lost, damaged, or stripped factory screw
• Helps reduce vibration and rattling caused by loose hardware
• Supports proper alignment of parts and a tight fit
• Symptoms can include loose or shifting panels, rattling noises, or gaps

• Disconnect power before servicing; for gas dryers, also shut off the gas supply if moving the unit.
• Match screw length and location to the original during reassembly.
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening.
• Use the correct driver for your screw head style as used on your model.

This drain inlet hose carries wastewater through the washer's internal drain path during drain and spin cycles. Replacing a cracked, kinked, or leaking hose helps restore proper draining and protect floors and nearby components from water damage. What it does:

• Routes drain water between internal components to the drain outlet
• Maintains a sealed flow path to help prevent leaks
• Common symptoms: water on the floor during/after draining, standing water left in the tub, visible cracks/bulges/kinks on the hose
• May clog with debris, restricting flow and causing slow or no drain

• 1 drain inlet hose

• Unplug the washer and shut off water supply before servicing
• Have towels or a shallow pan ready; residual water may spill when hoses are removed
• Note hose routing and clamp positions; ensure the new hose is fully seated and not twisted or kinked
• After installation, run a quick drain/spin and check all connections for leaks

This dryer drive belt wraps around the drum and motor pulley to rotate the drum during the cycle. Replacing a worn or broken belt restores proper tumbling so clothes move freely for even drying.

• Transfers motor power to the drum to enable tumbling
• A worn, stretched, or broken belt can cause the drum not to turn
• May also result in the dryer running but not tumbling
• Visual signs include fraying, cracks, or glazing on the belt

• Unplug the dryer before servicing; allow components to cool
• Access typically requires removing the front panel and/or top panel
• Note the belt routing around the motor pulley and idler before removal
• Inspect drum rollers and idler pulley while the belt is off; replace if worn

The Transmission Pulley Kit is an OEM part for GE washers. It includes nuts, washers, and other key components for connecting the transmission to the drive motor. This kit plays an essential role in transmitting power from the motor to spin the basket and turn the agitator during wash cycles.

Symptoms of a bad transmission pulley kit include:  

• The washer not spinning or agitating during cycles
• Grinding or clicking noises coming from the transmission area
• Leaks around the transmission seal or pulley area

Causes can be cracked or worn pulley components, stripped threads, or loosened nuts that no longer secure connections properly. Over time and through repeated use, normal wear and tear affect these transmission parts. 

Replacing with a genuine GE kit restores like-new operation, transferring optimized power for various cycles. This OEM GE replacement is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement screw secures appliance panels and internal components per your model's hardware list. Replace lost or stripped screws to keep assemblies tight, reduce vibration and rattles, and maintain proper alignment.

• Fastens brackets, covers, and sheet-metal panels as specified in the parts diagram
• Restores proper fit when an original screw is missing, stripped, or damaged
• Helps eliminate rattling or vibration from loose hardware
• Keeps components safely in place during operation

• Disconnect power to the appliance before servicing
• Match length, head style, and thread to the original; install in the same location/quantity
• Start threads by hand to avoid cross-threading; tighten with the correct driver
• Do not overtighten, especially into plastic or thin sheet metal

This is a small screw, and it is made for dryers, washers, and washer dryer combos. This is a genuine replacement part made by General Electric. Screws are common in these appliances and can cause many difficulties if they become loose, damaged, or missing.A new screw might be needed if there are areas in the appliance that seem off balance or not level. Another way to tell if a new screw is needed is if there are parts in the appliance that are loose or falling off. This is common over many years of normal use as the shaking of washers and dryers can eventually lead to loose screws. Be sure the washer or dryer is completely off before attempting to replace any screws.This is an OEM part sourced directly from the manufacturer. It is sold individually and is compatible with washers, dryers, and washer dryer combos made by General Electric.

The CAPACITOR is an OEM part for GE washers. It works along with the motor to efficiently power the agitation and spinning functions. The capacitor stores and releases electrical current as needed to ensure a smooth wash action. 

Symptoms of a bad capacitor include:

• The washer unable to progress beyond the initial agitation cycles  
• Sluggish or struggling movements during washing or spinning
• Buzzing, humming, or crackling noises from electrical components
• Frequent tripping of circuit breakers when operating 

Causes of failure can include drying out of internal components over many years, defects in capacitor plates or wiring, or electrical surges damaging sensitive components.

Replace yours today with this genuine OEM GE part for reliable storage and delivery of current. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Gasket is an OEM part for GE dryers. This seal prevents hot air from escaping during a cycle, ensuring that the dryer operates efficiently and safely. The gasket's primary role is to maintain the internal temperature and airflow, which are essential for the drying process.  

Causes of damage to the door gasket often involve regular wear and tear from opening and closing the dryer door.  

Symptoms of a bad Door Gasket include:

• Clothes taking longer to dry or not drying fully due to heat escaping from the dryer.
• An increase in energy consumption as the dryer works harder to maintain the required temperature.
• Visible wear, tears, or gaps in the gasket 
• Heat leakage from around the dryer door 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.