Gxsf30h Parts

This O-ring creates a tight, leak-resistant seal between mating water system components. Replacing a worn seal helps stop drips and maintain correct pressure and flow in your GE water treatment system.

• Forms the compression seal between housings, manifolds, or valve fittings
• Helps prevent water leaks and seepage at the connection
• Maintains system pressure by reducing bypass at the joint
• Typical failure signs: flattening, cracks, nicks, swelling, or persistent drips even after tightening

• Shut off the water supply and relieve system pressure before service
• Clean the groove and mating surfaces; remove debris, scale, or old residue
• Lightly lubricate with food-grade silicone grease; do not use petroleum-based products
• Seat the O-ring evenly without twisting and tighten fittings to manufacturer guidance—do not overtighten

Screen cone is a replacement cone-shaped screen that helps keep lint and debris out of the appliance's drain and pump area, reducing clogs and helping protect pump components from wear. What it does:

• Traps lint and loose debris before it reaches the drain and pump assembly.
• Helps maintain proper draining and reduces the chance of recurring clogs.
• Reduces stress and potential damage to the pump impeller caused by foreign debris.
• When worn or missing, common symptoms include slowed draining, recurring clogs, or unusual pump noise.

• Disconnect power to the appliance (unplug or shut off breaker) before accessing the pump/drain area.
• Turn off water supply if required by your model and drain remaining water before removal.
• Replace the old screen cone with the new unit, ensuring it seats fully in the housing; no special tools are typically required.

Fixes broken inlet/outlet valves or water flow issues in your softener. This valve body assembly controls water distribution. Easy DIY with basic tools.

Leaking water line connection? This compression nut ferrule secures tubing to prevent leaks at the inlet fitting. Simple slip-on installation.

Fix leaking water filter connections with this seal O-ring. Stops drips at pipe, hose, and valve fittings. Quick 5-minute replacement restores watertight seal.

This fill flow plug controls and limits water flow into the appliance to the specified 0.3 gpm rate, helping the unit fill correctly and preventing overfilling. It's a direct-replacement inlet flow restrictor used on compatible GE water systems. What it does

• Restricts incoming water flow to about 0.3 gallons per minute for proper fill volumes
• Helps maintain consistent water fill levels for ice makers and dispensers
• Can stop excessive flow that may cause slow fills, minor leaks at fittings, or improper ice/dispense operation
• Works as a simple inline replacement to restore correct inlet flow performance

• One fill flow plug (0.3 gpm)

• Replace only when water supply is shut off and the appliance is unplugged or power is disconnected
• Inspect nearby hoses and fittings for wear or leaks when replacing the plug

This is a small mesh screen filter used in water softener systems to prevent sediment and debris from entering or clogging internal components. It helps maintain proper water flow and filtration performance. Replace this screen if your water softener has reduced flow, is not regenerating properly, or if the screen appears torn, clogged, or deteriorated.

This is a small spring used in a water filtration or water softener system. It provides tension to hold a door, lid, or internal component securely in place. Replace this spring if the door or cover no longer stays closed or if the original spring is broken, stretched, or missing.

Connects the drain hose to the drain outlet on water softeners. Replace when the existing adapter is cracked, worn, or leaking for a secure connection.

Seals the nozzle and venturi connection in your water softener to prevent air leaks and restore suction. Replace if softener regenerates but doesn't soften water or tank won't drain. Verify fit by model number.

Replace the distributor top cap on your water softener system. This plastic component covers the distributor assembly and may need replacement if cracked or worn.

Replacement cap for water softener systems. Installs on top of brine tank or control valve housing. Needed when original cap is cracked, broken, or missing.

Support screen for water softeners prevents media loss and ensures proper filtration. Replace if damaged or during resin tank maintenance. Verify fit.

Routes excess water from your water softener to the drain, preventing spills and surface damage. Replace if worn, cracked, or missing. Verify fit with your model.

Adapter fitting that connects the drain hose to your water softener system. Replace if cracked, leaking, or broken to restore proper drainage connections.

Fix a water softener that won't regenerate or has hard water breakthrough with this rotor and disc assembly. Common wear part for valve issues.