Hbl870 Parts

This dishwasher water sensor monitors wash-water conditions so the control can adjust cycle time, rinses, and heating for consistent performance. Replace a failed sensor to restore reliable cleaning results and proper automatic cycle adjustments. What it does

• Detects water conditions during the wash cycle and reports to the control
• Helps the dishwasher optimize cycle length, rinses, and energy use
• Common symptoms: unusually long or short cycles, inconsistent cleaning, or sensor-related error messages
• Trigger erratic cycle behavior when the sensor is faulty or contaminated

• One sensor assembly

• Disconnect power and turn off water before servicing
• Access is typically from the underside; place a towel or pan to catch residual water
• Transfer/seat the seal properly if present; fully engage the locking tabs and reconnect the harness
• After installation, run a quick cycle and check for leaks and proper operation

Seals the oven door to retain heat and improve efficiency. Replace if you notice heat escaping or uneven cooking. Verify fit with your model number.

Microwave won't power on? A blown fuse is often the culprit. This protective component prevents electrical damage from power surges. DIY repair in 1-2 hours.

This replacement drive motor powers the wash drum in your machine, supplying the torque needed to tumble clothing and complete cycles under load. Replace a weak, seized, or noisy motor to restore smooth, reliable drum movement.

• Drives the drum/tub during wash and rinse cycles
• Common failure signs: drum won't turn/tumble or stops mid-cycle
• May hum, overheat, or emit a burning smell when failing
• Starts then stalls or trips the breaker on startup
• Some models may show a motor/drive-related error code

• Disconnect power before servicing; allow moving parts to stop completely
• Access the motor per your model (rear or bottom panel on most units)
• Label and disconnect wiring, remove mounting hardware, swap in the new motor
• Reassemble, ensure smooth drum rotation by hand, then run a test cycle

Oven won't heat after self-clean cycle? A failed temperature limiter (high-limit thermostat) cuts power to protect against overheating. Direct fix.

The Outer Door Panel is an OEM part for Bosch range doors. Crafted from durable stainless steel, it protects the inner workings of the oven door while providing an elegant and smooth surface for users.

Symptoms of a bad outer door panel include:

• Aesthetic issues like dents, scratches, or rusting of the surface
• Warping or sagging of the panel  
• Gaps or misalignment that compromise the door seal
• Looseness or inability to properly close the door

Causes of failure may include normal wear and tear over time from daily use or accidental impacts and dents. Exposure to heat could cause warping. 

Replacing this genuine Bosch OEM part restores the pristine look and feel of the oven door. Compatible with 300 series gas and electric range models, it ensures safe and reliable performance. This replacement panel is also compatible with Thermador and Gaggenau ranges.
 

Replace your wall oven's display module to restore clear indicator lights and responsive touch controls. Fixes erratic displays and unresponsive keypads. Verify fit with your model number.

Replacement inner door glass panel for wall ovens. Installs between door layers to restore protection when original glass is cracked or shattered.

Uneven baking or slow heating in convection mode? A failed convection fan motor stops hot air circulation. Moderate DIY repair restores even cooking.

This replacement refrigerator shelf restores a stable, level surface for storing food and beverages. Swap in a new shelf to recover lost space, keep items organized, and reduce spills caused by a damaged or missing shelf.

• Provides a sturdy surface to support containers and organize contents
• Fits into the factory shelf rails for a secure, level placement
• Helps improve visibility and access to items inside the compartment
• Common symptoms: cracked or broken shelf, won't sit level, missing shelf, items tipping or spilling

What's included: 1 shelf Install notes:

• Remove food from the area and lift the old shelf straight out of the side rails
• Wear cut-resistant gloves and handle edges carefully to avoid damage
• Align with the rails and slide/set the new shelf fully into position—do not force
• Reseat and check for obstructions in the rails

This plastic-foil capacitor is used in the appliance's electrical circuit to provide stable capacitance. It supports proper motor and power-circuit operation, helping components start and run smoothly while minimizing electrical noise. What it does:

• Stores and releases electrical energy to support motor starting/running or stabilize the power circuit
• Helps reduce electrical noise and voltage spikes in the system
• A failing capacitor can cause hard starting, humming, weak or intermittent operation, or tripped breakers
• Visible bulging, cracks, or heat damage on the capacitor indicates replacement is needed

• 1 capacitor

• Disconnect power at the breaker before servicing; verify no power is present
• Capacitors can retain a charge—discharge safely using appropriate tools and procedures
• Note wire positions and terminal orientation; transfer one lead at a time or take a reference photo
• Mount securely and keep wiring clear of sharp edges, heat sources, and moving parts

Holds the bulb and provides electrical connection for interior lighting. Replace if cracked, heat-damaged, or loose causing lights to fail. Confirm fit.

Oven overheats or shows E115 error? The temperature limiter (safety thermostat) may have failed. Moderate difficulty repair requiring careful disassembly.

Oven not heating evenly or baking properly? This heating element restores consistent heat distribution. DIY-friendly repair with basic tools.

Microwave won't heat but powers on? Replace the high voltage transformer. Also fixes loud humming or blown fuses. Moderate difficulty repair part.

This Terminal Box is an OEM part for Bosch Built-In Ovens. Integral to the oven's electrical system, this component serves as a secure connection point for various electrical wires within the appliance.

A common issue with a malfunctioning Terminal Box is loose connections or damage to the terminal block due to heat exposure or aging. 

Symptoms of a defective Terminal Box may include:

• Inconsistent power supply to the oven
• Non-functional heating elements
• Sparks or electrical arcing within the terminal box area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.