Hgs5l53uc10 Parts

This part is a replacement fixing kit and is a genuine OEM part manufactured by Bosch. This part has been sourced directly from the manufacturer and is intended to repair a broken or faulty door in a variety of different oven models. This fixing kit includes both of the door hinges that are necessary for repairing the oven door. These hinges are necessary for the user to control the opening rate of the door, as well as allow the door to remain ajar at an angle. When undergoing any repair work, make sure to always disconnect the power and gas supplies from the oven. It is highly recommended that work gloves are worn to for proper protection.This is an authentic replacement part and thus is suitable for use on several different models of ovens that have been manufactured by Bosch, Thermador, Gaggenau, and some other brands.

This cable harness is the wiring assembly that links dishwasher controls and internal components, restoring reliable electrical connections and helping resolve intermittent or failed component operation. Designed to replace a damaged or corroded factory harness. What it does

• Routes power and signals between the control board and internal parts so components can operate correctly
• Replaces broken, frayed, or corroded wires that cause intermittent power or communication failures
• Helps address symptoms such as devices not powering, erratic operation, or components that work intermittently
• Maintains correct wire routing and connector fit to prevent shorting or loose connections

• One cable harness assembly as shown

• Disconnect power to the appliance before starting any repair
• Compare the harness and connector shapes to the original before installation to ensure correct fit
• Handle connectors by the housings; avoid pulling on individual wires

This hinge kit restores proper door alignment and smooth opening/closing on compatible Bosch appliances. It replaces worn or damaged hinge components so the door seals and operates correctly. What it does:

• Replaces damaged or worn door hinge parts to stop sagging or uneven gaps
• Restores smooth hinge movement and reduces scraping or grinding noises
• Helps the door close fully to maintain an effective seal
• Addresses door misalignment that can cause uneven wear or poor sealing

• One hinge kit

• Turn off power to the appliance and disconnect water before starting
• Support the door while removing and installing the hinge to avoid injury or damage
• Use basic hand tools and follow the OEM service manual or diagram for correct placement and torque

This cover sheet is the outer-facing panel piece that protects and finishes the appliance cabinet, restoring appearance and shielding internal components from dust and debris. It provides a clean, factory look when replacing a damaged or missing panel. What it does:

• Covers and protects underlying components from moisture, dust, and everyday wear
• Restores the appliance's exterior appearance when the original panel is dented, scratched, or missing
• Helps maintain a proper seal and alignment of adjacent trim and panels
• Supports secure attachment points for nearby trim pieces and fasteners

• One cover sheet panel as shown

• Follow the appliance service manual for disassembly and reassembly to avoid damaging clips or connectors
• Use proper hand tools and keep fasteners in a safe place for reinstall; replace any damaged clips
• Disconnect power to the appliance before starting work to avoid electrical hazards

This water inlet valve controls dishwasher water flow during fill cycles, restoring proper filling and preventing overfill. Replace a faulty valve to stop no-fill, slow-fill, or continuous-fill issues and restore normal wash cycles. What it does:

• Opens and closes to admit water into the dishwasher during fill cycles
• Maintains correct water flow and pressure for proper wash performance
• Stops water flow if inlet fails closed or prevents filling if stuck open
• Common symptom link: dishwasher won't fill, fills slowly, or shows error/overflow conditions

• One water inlet valve

• Disconnect power and shut off the water supply before starting
• Turn off the breaker; water and electrical safety first
• Basic hand tools typically required; keep track of hose clamps and fittings
• Inspect inlet hoses and gaskets and tighten or replace clamps as needed

This selector knob lets you choose the cooktop/oven function with a simple twist, restoring reliable tactile control and clear position feedback for precise operation. Replace a cracked, faded, or loose knob to regain safe, confident use. What it does:

• Rotates to select the oven or cooktop function and provides tactile position feedback
• Replaces a cracked, worn, or loose knob that's hard to turn or won't stay set
• Helps restore accurate function selection when markings are faded or missing
• Matches original fit and mounting style for straightforward replacement

• Disconnect power to the appliance before servicing for safety
• Most knobs pull straight off the shaft; align and press the replacement onto the control post
• If the knob uses a set screw, loosen/tighten with the correct screwdriver; avoid overtightening
• Test function selection after installation to ensure proper fit and operation

This grille for pan is a replacement trim piece that restores proper airflow and appearance around the appliance pan. It helps keep the pan area protected and looking finished after repair. What it does:

• Covers and ventilates the pan opening to help direct airflow and prevent debris entry
• Replaces a cracked, warped, or missing grille to restore fit and finish
• Helps eliminate rattling or rubbing caused by a damaged trim piece
• Matches OEM fit so it installs cleanly with the original mounting points

• Install requires removal of the surrounding trim or access panel; follow your appliance manual
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• Disconnect power to the appliance before working in the service area
• Replace damaged clips or screws with OEM fasteners for secure fit

This door hinge secures and lets the appliance door pivot smoothly, restoring proper alignment and seal for reliable operation. Use this hinge to replace a worn, bent, or broken door pivot that prevents the door from seating correctly. What it does:

• Provides a stable pivot point so the door opens and closes smoothly
• Restores correct door alignment to improve sealing and reduce air leaks
• Stops door sagging, binding, or uneven gaps when mounting hardware has failed
• Prevents rubbing or unusual noises from a loose or damaged hinge

• One door hinge

• Disconnect power to the appliance and remove contents from the door before servicing
• Support the door while removing and installing the hinge to avoid damage or injury
• Tighten fasteners securely to the manufacturer's torque recommendations; replace any worn screws

This water inlet valve controls the flow of water into the appliance so cycles fill when needed and stop to prevent overfilling. Replaces a worn or failed inlet valve to restore reliable water fill operation. What it does:

• Opens and closes to allow water into the appliance during fill cycles
• Works with the control board and float/sensors to prevent overfill
• Common repair for no-fill, slow-fill, or continuous-fill symptoms
• Helps stop leaks caused by valves that fail to fully close

• Turn off power and shut off the water supply before starting
• Drain residual water and relieve pressure from the line before disconnecting
• Inspect and replace any worn inlet hoses, clamps, or seals during installation
• Test cycles and check for leaks after installation

The Oven Light Switch is an OEM part for Bosch ranges. It engages convenient interior illumination through a single motion, allowing monitoring of baked goods without compromising temps. 

Causes of a bad oven light switch can include failures from the natural stresses of constant clicking associated with opening and closing the oven door. 

Symptoms of a bad oven light switch include:

• Dim or unresponsive lights even when the door is opened properly     
• Inability to turn lights off, leaving them burning needlessly  
• Stuck in either the on or off position without toggle functionality
• Potentially hazardous exposed live terminals under switch housings

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

This hinge is the OEM replacement that supports and pivots your appliance door for proper alignment and smooth opening. Replacing a worn hinge restores correct door fit and helps prevent sagging or binding. What it does:

• Provides a pivot point for the appliance door to open and close smoothly
• Maintains door alignment and seal to help prevent leaks or uneven gaps
• Worn or damaged hinges can cause the door to sag, rub, or close unevenly
• Matches OEM fit and mounting points for direct replacement

• Disconnect power and water before inspecting or replacing door hardware
• Support the door during removal to prevent dropping or damage
• Compare new hinge to the old part for correct orientation and mounting before final installation
• Tighten fasteners securely but avoid over-torquing; test door operation after installation

This cable harness routes power and control signals between the appliance control board and user interface, restoring reliable electrical connections for responsive controls and indicator lights. Replace a damaged harness to fix intermittent or lost control functions. What it does:

• Carries power and signal lines between the control panel and main control board.
• Restores proper electrical connections when wires are damaged, frayed, or connectors are corroded.
• Commonly used to address intermittent controls, unresponsive buttons, or missing display/indicator lights.
• Maintains correct routing and secure connector fit to prevent shorts or signal loss.

• One cable harness

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Remove access panels or console to reach the harness; note connector locations before disconnecting.
• Disconnect all harness connectors by releasing retention clips—do not pull on wires.
• Route and secure the new harness along the original path; ensure connectors are fully seated and latched.

This oven rack replaces a bent, worn, or missing rack to restore a safe, level surface for cookware. It slides into the oven's side rails so you can position dishes for even baking, roasting, and broiling.

• Provides a stable surface for pots, pans, and bakeware at standard rack positions
• Slides along the oven's support rails for easy loading and removal
• Helps maintain proper air circulation and consistent cooking results when positioned correctly
• Common symptoms: rack warped, rusted, missing, unstable, or difficult to slide

• Allow the oven to cool completely; disconnect power or shut off gas before servicing
• Remove the old rack, align the new rack with the side rails, and insert levelly until fully seated
• Verify orientation and placement per your owner's manual