Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
I had to remove the microwave from the range and then remove the cover from the microwave to determine the exact problem. After a visual inspection then discharging the high voltage capacitor, I used a meter to test the high voltage diode and fuses. After using the meter to ohm out the magnetron, I removed it from the unit, and seeing that the hole in the end of the magnetron's tube was enlarged and burnt, as if it was arcing, I assumed it was the bad part. I ordered the parts from Appliance... Read more
Went to Appliance Pros and found the part for my microwave. Web site was very easy to use. Ordered the thermal fuse and it was delivered in 2 days. Shipping was a a bit expensive, but can't complain with two day delivery. Replaced the failed part and the microwave now works great. It 1 1/2 hours, but I took my time. Needed one helper to remove the top screws. Handy-wife did it without a problem. Read more
Replaced the control board. The top plastic panel on the microwave is held in place with screws and glue, and is very fragile, so I broke mine when trying to take it off, be careful. Read more
I bought a used Microwave without a plate to mount the microwave. So i couldn't mount the microwave. Wife not happy:(. . So within 3 day from ordering the mounting plate from Appliance Parts Pros. com the microwave was up and running. Wife is now happy:). Fast Delivery. Read more
Color: metallic. It measures about 6 inches wide by 4 inches deep.
There were 3 door switches. Check all the switches and it was the bottom which ran the fan. The top 2 switches were fine. Take top cover of the microware. 3 screws on top. Move the cover 1/3 to your left and the cover come of. There is screw in the front to remove the control panel Take the panel of and then take the 2 screws of which hold the switches. Check each switch and check. Read more
I have one of those combo units with the microwave on top and the oven on the bottom. The thermometer switch located on the upper right side mounted on top of the magnetron read open on a continuity test. Replaced the thermal fuse. Everything works fine now. Note: The thermal switch on the left side read closed, the fan switch on the lower right side read open. I just watched some youtube videos on what and how to test the components. The 20A fuse was good. So I tested the thermal... Read more
Google indicated that the problem was the control panel. It was easy to remove it and replace the panel.Found a parts company that would allow returns if new part did not remedy the problem. Ordered part and it arrived the next day. Replaced panel and microwave is working. Keeping my fingers crossed. DO NOT PURCHASE A PART FROM A COMPANY THAT WILL NOT ACCEPT RETURNS.Problem could be another defective part and you will be stuck with an expensive part. Read more
I ordered a new latch and I also had to order a new choke since I broke one of the tabs off of it when I removed it. I put the new latch in and connected the spring and I was done. It was fairly easy! Read more
Color: Black
Replaced the whole right side panel. take 3 screws from the top and slide the grille to your left. then remove one more screw for the panel. push it up, disconnect the wires then reconnect to the new panel. this panel was about $150 and the original cost of the moven about $300. Most likely not worth fixing but it was much easier than replacing the whole unit. These companies make the units so cheap it's crazy. Probably costs them $25 to manufacture, too. You figure out the rest. It was an easy... Read more
The part I received worked perfect. Read more