Hvm154olm1cs Parts

This replacement rack holder supports the removable wire rack inside your microwave, keeping it steady and level. Replace a cracked or missing holder to restore stable, reliable two-level cooking performance. What it does:

• Holds the interior wire rack securely against the cavity wall
• Maintains correct rack height and alignment for stable support
• Helps prevent rack wobbling, slipping, or rattling during use
• Common signs of failure: cracked/heat-damaged holder, rack tilts or falls, scorch/arcing marks near the support

• 1 rack holder

• Disconnect power by unplugging the microwave or switching off the circuit breaker
• Remove the wire rack and note the holder's orientation and location
• Remove the existing holder (release clip or remove screw) and transfer any original mounting hardware if needed
• Seat the new holder fully, reinstall the rack level, and test with a microwave-safe cup of water

This microwave high-voltage transformer steps household AC up to the high voltage required by the magnetron to generate microwave energy. Replacing a failed transformer restores heat when the oven runs but food remains cold.

• Steps up line voltage to supply the magnetron during cooking
• Common symptom of failure: microwave runs but does not heat
• May also cause loud humming, a burning odor, or tripped breaker/fuse when energized
• Visual signs can include scorching or discoloration on the windings or terminals

• Disconnect power; the high-voltage capacitor can retain a dangerous charge—discharge it before servicing
• High-voltage microwave repairs are hazardous
• Note wire positions and mounting orientation before removal; transfer any brackets or insulators as configured
• Secure with original hardware and verify all connections are tight and routed clear of heat or moving parts

Grille assembly replaces the front vent and control-area trim on your range or oven, restoring a clean appearance and directing exhaust airflow. Ideal when the original grille is cracked, bent, loose, or missing. What it does:

• Covers the front vent/control area for a finished, factory look.
• Replaces cracked, dented, loose, or missing grille pieces that cause visible damage or rattling.
• Helps direct exhaust airflow out of the vent opening and keeps the area tidy.
• Uses the appliance's original mounting points for a direct replacement.

• Always disconnect power to the appliance before beginning any repairs.
• Installation typically requires removing the lower access panel or control trim to reach mounting screws/clips.
• Use common hand tools; handle the grille gently to avoid scratching the finish.

This control panel is the user console that houses the oven/range buttons and display, restoring normal operation and allowing program selection and status feedback. It replaces a cracked, unresponsive, or damaged front console. What it does:

• Provides the front keypad and display interface for programming temperatures, timers, and oven functions
• Restores responsive button input and clear status readouts when the original panel is cracked, worn, or non-functional
• Helps resolve issues where controls do not register presses or the display is obscured
• Works as the main user-access point for starting and stopping cycles and setting options

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Handle the panel carefully to avoid bending or damaging the display and connectors
• Some installations require removing the oven console trim and disconnecting wiring harnesses; keep screws and small parts organized

This run capacitor helps the appliance motor start and run smoothly by storing and releasing electrical energy. Replacing a worn capacitor can restore reliable motor operation and reduce abnormal motor noise or cycling. What it does:

• Provides the brief power boost motors need to start and maintain RPM
• Helps stabilize motor voltage and improve run efficiency under load
• Commonly linked to symptoms such as motors that hum but won't start, slow or intermittent motor operation, or unusual motor noise
• Reduces stress on motor windings that can lead to premature failure when functioning properly

• One motor capacitor

• Always disconnect power at the breaker or unplug the appliance before servicing
• Capacitors can hold a charge; discharge safely
• Observe proper polarity and mounting location during installation; secure wiring and connectors

This stirrer assembly circulates microwave energy inside the cavity so food heats more evenly and prevents cold spots. It replaces a damaged or noisy stirrer that can cause uneven cooking or unusual microwave noise. What it does:

• Spins the microwave stirrer to help distribute microwave energy for more even heating
• Reduces hotspots and cold spots during cooking
• Stops or reduces rattling, grinding, or squealing noises when the original stirrer is worn
• Helps prevent arcing or sparking caused by a cracked or broken stirrer cover

• Disconnect power at the breaker or unplug the appliance before servicing to avoid electrical shock.
• Access may require removing the microwave's outer cabinet or control panel; follow OEM service manual steps.
• Handle the stirrer and cover carefully—plastic parts can crack if forced.

This control panel is the user interface assembly that houses the touchpads/buttons and display used to operate the range/oven. Replacing a damaged or unresponsive panel restores normal control and visible cycle feedback. What it does:

• Provides the buttons/touchpads and display needed to select bake, broil, timers, and other oven functions
• Relays user commands to the oven's main control so cycles start and stop as expected
• Restores visible status/error indicators when the original panel is cracked, faded, or nonresponsive
• Helps resolve common symptoms like unresponsive buttons, missing display segments, or erratic control behavior

• One control panel (user interface assembly)

• Disconnect power at the breaker before beginning any work to avoid shock or injury
• Handle the panel and any attached ribbon/cable with care to avoid damaging fragile connectors or the display
• Basic hand tools are typically needed to remove trim and fasteners; reattach connectors securely before restoring power

This handle assembly replaces a damaged or worn appliance door handle, restoring a secure grip and normal door operation. Durable replacement designed to match the original fit and finish for an easy refresh. What it does:

• Provides a solid, ergonomically shaped grip for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that make the door hard to operate
• Helps restore proper door alignment and sealing when handle damage interferes with use
• Matches original mounting points for a direct replacement

• Disconnect power to the appliance before starting any repair
• Keep track of mounting screws and hardware during removal and installation
• Use basic hand tools (screwdriver, nut driver) and avoid over-tightening fasteners

This H.V. transformer supplies the high voltage needed to drive the magnetron in microwave ovens so food heats properly. Replacing a failed transformer restores the high-voltage supply that powers microwave output. What it does:

• Converts incoming low-voltage power to the high-voltage required by the magnetron
• Enables normal heating; a bad transformer can cause no-heat or weak-heat symptoms
• Can produce humming, burning smells, arcing, or tripped fuses when failing
• Works with the high-voltage diode and capacitor as part of the HV circuit

• One H.V. transformer

• Disconnect power and verify the appliance is unplugged before starting
• Discharge the high-voltage capacitor fully to prevent shock; use insulated tools
• Handle the transformer carefully — it is heavy and mounted with screws/brackets