Jas9800aab Parts

This door gasket seals the refrigerator door to help maintain a consistent internal temperature and reduce energy loss. It replaces a worn, torn, or hardened seal to improve cooling performance and reduce frost buildup. What it does:

• Creates an airtight seal between the door and cabinet to help keep cold air in
• Helps prevent warm air infiltration that can cause frost, condensation, or temperature swings
• Reduces compressor run time and energy waste caused by a failing seal
• Fits the refrigerator door opening; restores proper door shut and alignment

• One door gasket

• Unplug the appliance before starting any repair
• Clean the door frame and gasket channel before installing to ensure a proper seal
• Soften and position the gasket in the channel, then fasten any retainers or screws if present; follow OEM instructions for final seating
• If the gasket is stiff, warm it (per OEM guidance) to help form fit; avoid cutting or altering the gasket unless specified by the manufacturer

This extruded refrigerator door handle provides a durable, easy-grip replacement that restores a secure, finished pull on compatible GE refrigerators. Ideal when the existing handle is cracked, loose, or cosmetically worn. What it does:

• Replaces a damaged or broken refrigerator door handle to restore safe opening and closing
• Provides a full-length, extruded grip for comfortable handling
• Matches original mounting points for a direct-fit swap on compatible doors
• Improves appearance by replacing a scratched, faded, or cracked handle

• Typically installs with screws or clips at the door; refer to your model's service manual for exact fasteners
• Power/appliance disconnect not required for handle replacement, but remove contents and support the door to prevent slippage
• Handle surface may have protective film—remove before use

This small replacement bumper cushions and protects the appliance frame/trim where panels meet, helping reduce vibration, chipping and rattles for a cleaner, quieter fit. Ideal when the original bumper is worn, cracked or missing. What it does:

• Cushions contact between the frame/trim and adjacent panels to reduce noise and prevent damage
• Helps maintain proper panel alignment and sealing where the trim meets the cabinet
• Reduces rattling or vibration caused by loose or degraded trim pads
• Restores protective spacing that prevents chips or scratches to finished surfaces

• One frame front bumper

• Disconnect power to the appliance before starting work and follow all safety precautions
• Usually installs by pressing into a slot or onto a mounting surface after removing the trim piece; some trim removal may be required
• Inspect mating surfaces for damage or debris and clean before installing the new bumper
• Replace with the exact part number only; do not force or modify the bumper to fit

This is the glass cooktop assembly that covers and seals the cooking surface, providing a smooth, heat-resistant top for electric ranges. It restores a flat, stable surface for burners and makes cleaning easier. What it does:

• Replaces damaged, cracked, or chipped cooktop glass to restore a safe cooking surface
• Supports and aligns surface elements so burners sit correctly and heat evenly
• Seals the cooktop opening to help contain spills and simplify cleanup
• Helps prevent heat or glass fragments from exposing underlying components

• One range top and glass assembly

• Disconnect power to the range before starting any work; for gas ranges also shut off the gas supply
• Handle glass carefully and wear gloves; glass can break and cause injury
• Installation may require lifting and aligning the glass into clips or brackets—two people may be needed for safe handling
• Inspect surrounding seals and trim; replace damaged seals or fasteners as needed

This Haliant halogen surface element and pad assembly replaces a damaged or nonworking cooktop heating element to restore radiant heat and reliable surface operation. It fits Haliant-style radiant cooktops and provides the element plus its insulating pad for proper seating. What it does:

• Replaces a burnt-out or cracked halogen surface element so burners heat again
• Restores even heating when a single cook zone is not reaching temperature
• Replaces an element with visible damage, burned spots, or intermittent operation
• Provides the insulating pad that helps secure the element and reduce heat transfer to the cooktop frame

• One Haliant halogen surface element and pad assembly

• Disconnect power to the appliance at the breaker before starting any repair
• Handle the element carefully; glass halogen elements are fragile and can break
• Verify proper fit and seating of the pad and element before restoring power

Replacement cooktop guide that positions and supports the cooktop glass so the top sits level and secure. Restores proper alignment to reduce movement and uneven gaps around the cooktop edge for safer, more stable use. What it does:

• Aligns and stabilizes the cooktop glass to keep it seated correctly in the range cutout
• Helps prevent the cooktop from shifting, rubbing against trim, or vibrating during use
• Commonly replaced when the glass feels loose, sits unevenly, or the edge shows wear
• Supports a flush fit to help avoid chipping or damage where the glass meets the cabinet

• Disconnect electrical power (and gas supply if applicable) before servicing and wear cut-resistant gloves when handling the glass top
• Lift or remove the cooktop per the appliance service instructions to access and replace the guide
• Install the new guide, re-seat the cooktop, and verify the top sits flush and does not move; do not overtighten fasteners
• If the glass top is cracked or damaged, replace the glass top before reinstalling guides

This knob thermostat assembly replaces a worn or broken temperature control knob and switch, restoring user control of oven or range temperature. It provides a direct replacement that mounts where the original control knob connects. What it does:

• Replaces a damaged or non-responsive temperature control knob and its integrated thermostat/switch
• Restores the ability to set and adjust cooking temperature from the front control panel
• Helps resolve symptoms like a loose or cracked knob, inability to change temperature settings, or intermittent temperature control
• Works as the user-interface portion of the temperature control system (knob plus attached switch/shaft)

• One knob thermostat assembly (knob with attached thermostat/switch)

• Disconnect power to the appliance before beginning any repair to avoid shock or injury
• Remove the old knob assembly from the control shaft and secure the new assembly in the same orientation
• Do not force components; verify proper alignment of the shaft and mounting features before tightening

Includes 12 screws.

This bake element is the lower heating element inside the oven cavity. It supplies steady bottom heat during Bake cycles, helping the oven preheat properly and cook food evenly when the original element has failed.

• Provides the primary bottom heat during Bake mode
• Cycles with the oven control/thermostat to maintain set temperature
• Common failure symptoms: no heat in bake, very long preheat, uneven or undercooked results
• Visible damage may include blistering, cracks, or burned spots on the element sheath

• Disconnect power at the breaker and allow the oven to cool completely
• Remove racks; take out the element's mounting screws and gently pull the element forward to access the terminals
• Support and label wires; transfer them to the new element one at a time to avoid miswiring and prevent wires from slipping back
• Reinstall securely, restore power, and run a Bake test to verify operation

Includes: Anti-tip bracket, screws and instruction sheet.

This is the range surface unit infinite switch for an 8-inch burner. It regulates power to the large surface element so you can set and maintain the desired heat level during cooking.

• Controls the temperature of an 8-inch surface (cooktop) element
• Replaces a switch that causes an 8-inch burner to be stuck on high, not heat, or only work intermittently
• Helps restore smooth, adjustable heat settings
• Designed for the large surface element circuit on compatible ranges

• Disconnect power before servicing; this is a high-voltage repair
• Note knob orientation and wire positions; take a photo for reference
• Transfer wires one at a time to the new switch to maintain correct connections
• Ensure the switch shaft and knob align properly before reassembly and testing