Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This part is the lens for a small appliance light on select GE cooking products. It covers and diffuses the lamp, protecting the opening and restoring a clean, finished appearance so status illumination is easy to see.
Super easy with your parts and directions Read more
The Radiant Element Spring is an OEM part for GE electric ranges. This spring supports the radiant element coil and provides the necessary tension to allow the coil to glow red-hot during the cooking process.
Causes of a bad spring can include fatigue from repeated heating and cooling cycles, damage due to impact or mishandling, or corrosion over extended use.
Symptoms of a bad radiant element spring include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Black. 8-18 AB HXW 3/8
I ordered the part and was impressed to receive it within two day! I didn't need the screws I ordered (which I ordered just in case) but the trim was put on with no problem and my oven looks brand new again! Thank you! Read more
This oven light gasket seals the light lens/cover to the oven cavity. Replacing a worn gasket restores a tight barrier that helps keep heat, steam, and splatter away from the light assembly and lets the lens seat securely.
I researched on Appliancepartspros.com how to fix a control board. I came across some online videos showing exactly how easy the process really was. I also typed in the model number on the site and was able to pull up the parts diagrams to figure out which other part numbers I needed. I ordered the control board, light socket, light gasket, and light bulb. I was shocked to know that the control board came in the next day! The other parts arrived the following day as well, which definitely... Read more
This oven light cup is the interior housing that supports and shields the oven lamp and lens. Replacing a damaged cup keeps the light assembly secure and properly aligned so you can clearly see inside the oven during cooking.
Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now. Would definitely call again if I needed assistance. Read more
This anti-tip bracket assembly secures the rear of your range to the floor or wall. It helps prevent the appliance from tipping forward during everyday use and supports compliance with manufacturer safety and installation requirements. What it does:
This is the door pad. Consider replacing both when replacing trim number WB07T10230
Ordered replacement from appliancepartspro.com and installed. Took maybe 10 minutes to remove old one and instal new. Read more
This outer oven door glass panel replaces cracked or shattered front glass, restoring the door's protective barrier and factory look while helping maintain proper heat containment and safe operation.
This was absolutely the easiest process I have ever dealt with. I wouldn't call myself "Handy". I mean, I am a Senior Estimator for a very large Construction company and in my younger years, I was a custom carpenter. So while I can not say I am a complete novice, I have never repaired an appliance. I am also a visual learner, so if I am shown something using the right tools, I can repeat the process. My brother can fix anything with any tool, that's not me. So the glass broke. I found... Read more
This is a genuine OEM replacement screw that is to attach the oven door panels to each other. This is a fully threaded screw that fits the predrilled hole to connect the two components. The screw is used with a washer when installed. This screw does not require a nut; it connects directly into the oven part, where it has a built-in receiving nut. If this part becomes worn and breaks or is lost during repairs to the oven, it must be replaced before the oven can be reassembled.Component assembly screws like this one used in oven panels are not normally replaced. These are made of high-temperature steel and designed to last a long time; however, if the oven panels are removed to make repairs, one or more screws may become lost. If this happens, replacement screws must be purchased and installed before the oven can be used. This screw is a silver metal replacement part that is sold individually. It does not come with the washer needed to install it. Verify the number of screws needed before ordering. This screw is designed for use in ovens manufactured by General Electric and Kenmore.
My son-in-law helped me. He pulled the liner open enough that he could see he just had to tighten up the existing screw on the door handle.. For the liner, we put a new screw in each side and tighted it up. At first we were afraid it was in the hole the screw went into but finally got it to screw in tightly. Back in business!!! Read more
Oven doors utilize door hinges to open and close efficiently. There is a door hinge attached to opposite ends of the door, and the part is also connected to the range. With time, the hinges can wear out, get damaged, or break off. When the hinges are no longer functioning correctly, replacement parts are necessary to continue using the appliance.An indication that there is a problem with the door hinge on an oven door is difficulty opening or closing or a door that partially slips on one side or the other out of position. A visual inspection will determine the condition of a door hinge. The replacement of the piece is simple. Unplug the range from its power source before starting the repair. Wear gloves for protection. Check the condition of both hinges before ordering. This door hinge is an authentic OEM replacement part. It is sourced directly from the manufacturer. The piece is sold as an individual unit. The door hinge fits several different models of ranges. The replacement part is compatible with appliances produced by General Electric, Hotpoint, and RCA. It is manufactured using high-quality, durable metal materials.
Great!! very simple replacement and easy. Read more
This drawer wedge aligns and stabilizes the lower drawer so it opens and closes smoothly and sits flush. Replacing a worn or missing wedge helps eliminate wobble, rubbing, and gaps for better everyday operation.
This replacement control knob restores a secure, accurate feel when setting temperatures on your cooktop or range. Swap out a worn or broken knob to regain smooth, dependable control of your appliance's settings. What it does:
Watched the video and replaced it. Though I did one wire moving at a time, rather than pull all the wires off and then try to figure where they go. I did take a photo first though for backup, but did not need it. Need the needle nose pliers to take connectors off the old one. Did not want to rip wire from fastener. small Philips screw driver Use small socket on a drill to remove the 4 screws from the rear panel. took 5 minutes. Read more
This is a 6-20 machine screw, 3/8 inch length, used to secure trim, panels, or small components on compatible cooking appliances. Replacing a missing or damaged screw helps keep parts tight and prevents rattles or shifting during use.
Replaced all of the control parts for the GE oven. Read more
This left-side black door handle replaces a damaged or missing handle to restore a secure grip and the appliance's finished appearance. Designed to match the original door hardware for a straightforward replacement. What it does:
Replacement fastener used to secure appliance components. If a screw is missing or damaged, panels and brackets can loosen or rattle. Installing a new screw restores a tight fit and helps keep parts properly aligned.
This mounting screw secures appliance components to the chassis for a tight, rattle-free fit. Replacing a missing, stripped, or corroded fastener helps keep panels, brackets, or burner assemblies properly aligned and secure.