Jed8430 Parts

This 10-32 terminal block nut fastens wire lugs to the appliance's terminal studs. Replacing a missing, stripped, or corroded nut restores a tight, reliable connection and helps prevent heat damage or intermittent power at the connection.

• Secures wire lugs to a 10-32 terminal stud for a solid electrical connection
• Restores proper clamping force when the original nut is stripped, corroded, or missing
• Helps address loose/burned terminal connections, heat discoloration, or intermittent power at the block
• Suitable for terminal block and similar 10-32 stud applications on compatible appliances

• Disconnect power at the breaker or unplug the appliance before servicing
• Inspect the terminal block, studs, and wiring for heat damage; replace any damaged components
• Clean threads and start the nut by hand to avoid cross-threading; tighten firmly without overtightening
• If the stud turns while tightening, hold it with an appropriate tool to protect the block

Razor blade scraper.

Color: black. It measures about 1 inch in diameter.

Color: Black

This motor isolator is a vibration-damping grommet that cushions the motor mount to reduce noise and prevent metal-to-metal contact. Replacing worn isolators helps keep the motor seated correctly and the appliance running quieter and smoother.

• Cushions the motor to minimize vibration transfer to the chassis
• Helps reduce rattling or buzzing noises during fan/blower operation
• Supports proper motor alignment and mounting stability
• A common maintenance item when rubber mounts become cracked, hardened, or missing

• Disconnect power and allow hot components to cool before service
• Access the motor mounting points; replace isolators in matched locations
• Inspect adjacent mounts and hardware; replace additional isolators as needed
• Do not overtighten fasteners—compress the grommet evenly without deforming it

This replacement cooktop surface panel forms the appliance's upper cooking surface. It restores a smooth, level top, protects internal components from spills, and ensures correct alignment of the surface components for safe, reliable everyday use.

• Forms the cooking surface and covers the chassis beneath
• Provides openings/mounting points for surface components
• Common failure signs: cracks, chips, dents, rust, or finish damage that won't clean
• Warping or broken mounting points causing components not to sit flat or secure

• Disconnect power; for gas models also shut off the gas supply
• Wear cut-resistant gloves; handle carefully to avoid bending, chipping, or scratching
• Transfer surface components (e.g., burners/elements, bezels, gaskets, screws) from the old panel as directed by your model's service information
• After reassembly, restore power and, for gas units, check connections for leaks before use

The Filter is an OEM part for Whirlpool cooktops. This part is responsible for trapping grease and other airborne particles, ensuring that your kitchen remains clean and free from unwanted odors during cooking. It effectively captures grease and prevents it from accumulating in the exhaust system.

A bad grease filter can occur due to clogging, damage, or excessive wear. If you notice symptoms such as poor ventilation, persistent cooking odors, or visible grease buildup in the downdraft vent, it may be time to replace the worn-out or clogged grease filter with this genuine OEM part.

Symptoms of a bad grease filter include:

• Poor ventilation and airflow
• Lingering cooking odors
• Visible grease accumulation in the downdraft vent

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Color: gray. Measures about 2 inches in diameter.

This dual-ring surface heating element replaces a faulty top burner to restore flexible cooking power and even heat across the cooking zone. It fits compatible Whirlpool-range cooktops and provides inner and outer heating rings for varied pan sizes. What it does:

• Replaces a damaged or non-heating top burner element so the cooktop can heat again.
• Restores both inner and outer heating zones when one or both rings have failed.
• Helps resolve symptoms such as no heat from the burner, weak heating, or uneven cooking.
• Matches the OEM element design for direct-fit replacement on supported ranges.

• One dual-ring surface heating element (single assembly)

• Disconnect power to the appliance before attempting any service to avoid electrical shock.
• Allow the cooktop to cool completely before touching the element.
• Basic removal typically involves lifting the cooktop or opening the cooktop rim.

This is a replacement 6-32 x 3/8" screw used to secure panels and components on compatible Whirlpool appliances. It restores proper fastening for loose or missing fasteners so parts stay aligned and stable. What it does:

• Secures trim, panels, brackets or small components to the appliance frame
• Stops rattling or movement caused by a missing or stripped screw
• Helps maintain proper alignment of control panels and access panels
• Provides the correct thread engagement for safe, stable fastening

• One replacement screw (6-32 x 3/8")

• Disconnect power before accessing internal components
• Use the correct screwdriver or nut driver to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to threads or components
• Keep removed hardware organized and compare sizes before installation

This knob sleeve secures a control knob to the control shaft, restoring proper knob alignment and smooth operation so settings stay where you set them. What it does:

• Centers and stabilizes the control knob on the shaft
• Prevents knob wobble, slipping, or uneven rotation
• Helps maintain reliable control selection for temperature/settings
• Common symptom: loose, tilted, or spinning knob

• Disconnect power to the appliance before servicing for safety
• Remove the control knob to access the sleeve; installation typically slides into place on the control shaft
• Reinstall the knob and test function before restoring normal use

This spring element support secures and stabilizes a range or oven heating element to keep it properly positioned for consistent heating and safe operation. It replaces a worn or broken support that allows an element to sag or vibrate. What it does:

• Holds the bake/broil heating element in the correct position so it heats evenly
• Prevents the element from sagging, touching the oven cavity, or rattling during use
• Helps maintain correct element clearance to reduce arcing and uneven cooking
• Addresses symptoms like a loose or wobbly element, unusual noises, or intermittent heating

• One spring element support

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle the heating element and support carefully to avoid bending or damaging the element
• Verify correct part orientation against the oven's wiring diagram during installation

Replacement fan switch knob that provides a secure grip and clear indicator for adjusting fan settings on compatible Whirlpool appliances. The gray finish restores appearance and makes controls easier to use when the original is worn or damaged. What it does

• Replaces a cracked, missing, or worn fan switch knob so you can regain tactile control of the fan settings.
• Provides a visible pointer for accurate position selection.
• Restores original look and ergonomics to the control panel.
• Simple mechanical control part — no electrical components.

• Disconnect power to the appliance before attempting any service.
• Most knobs pull straight off the switch shaft; align the pointer and press the replacement knob onto the shaft until seated.
• If your model uses a retaining screw or clip, retain and reinstall it as required; use the proper tool and avoid overtightening.

A 6" replacement surface heating element for electric ranges and cooktops that restores heat to a single burner. Use this element to replace a damaged or non-heating coil and get your cooktop back to proper cooking performance. What it does:

• Heats cookware when the burner control is turned on; functions as the cooktop's primary heat source for one 6" burner.
• Replaces elements that are broken, visibly damaged, not heating, or heating unevenly.
• Re-establishes proper electrical contact at the burner connection when the element is correctly seated.
• Works with manual and infinite-switch style burner controls.

• One (1) 6" surface heating element.

• Disconnect power to the range at the circuit breaker before beginning any work.
• Allow the cooktop and element to cool completely; remove the old element by lifting and unplugging from the terminal block or unsnapping from the receptacle.
• Inspect the element receptacle/terminal for damage and replace the receptacle if loose or corroded.
• Seat the new element fully in the receptacle and test operation with power restored; do not operate without cookware or with damaged wiring.

This rear trim is a factory-style replacement piece that restores the finished back edge of your 30-inch range or cooktop for a clean, factory look and to help protect internal components from debris. What it does:

• Covers and finishes the rear edge of the cooktop or range for a factory appearance
• Helps block dust, grease and debris from entering the control or rear cavity area
• Replaces damaged, bent or missing trim that can catch food and interfering particles
• Fits the standard 30-inch width for compatible Whirlpool-style ranges

• One rear trim piece (30-inch)

• Disconnect power to the appliance before attempting any service
• Usually secures with screws or clips at the rear; inspect mounting points before installation
• Handle carefully to avoid scratching the finish; use appropriate tools and protective gloves