Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This is a double burner grate. The grates on a gas stove offer protection to the actual burner portion where the flames originate.Grates on a gas stove can become damaged through heavy impacts, rust, or other elements. Failure to keep them clean on a regular basis can also lead to permanent damage. Using certain pots and pans that aren't recommended for the surface could also be a cause of premature wear. Wear gloves when installing this part and be careful not to damage the burner eyes or stovetop. After removing the old grates, prepare the new ones by locating the slots the grates fasten to. Input the outer corners of the grates into these slots and slowly lower them down, making sure they're lined up evenly.This GE double burner grate is a genuine OEM replacement part sourced directly from GE. The grate is only available individually and does not include other parts or the original appliance. This product is compatible with GE brand gas stoves.
All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door. The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time. I replaced the inside steel panel. Took about an hour. Was able... Read more
Removed the lower storage drawer. Removed the burner grates from the gas cook top. Unplugged the power. Pulled the stove out from the counter. Open the oven door. remove the oven racks. Remove the convection fan cover (4 screws). remove the nut holding the fan (note the nut has left hand threads).Remove the protective sheet metal cover from the back of the oven (6 screws), Disconnect the (3) wires from the convection motor (note wire placement). Remove the convection motor (3 screws). Reverse... Read more
I BOUGHT THE PART FROM YOU AND INSTALLED IT. Read more