We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replaces a cracked, bent, or missing microwave exhaust damper flap. Installs on top of the unit to direct airflow and prevent drafts when not venting.
Most orders arrive by Tuesday, November 24
Turntable won't spin or rotates unevenly? This microwave turntable motor restores smooth rotation. Easy DIY repair—most complete it in under 10 minutes.
Removed 8 screws from bottom panel on microwave. Pulled two prong plug off old motor. Read supplied voltage off motor decal and tested for it. Deemed motor to be bad and changed it. Works great. After tearing old motor apart it seems a liquid got in there from inside microwave. No seal on motor. Bad design flaw in my opinion. Read more
Circular ring assembly that supports and rotates the glass turntable in your microwave. Replace if cracked, broken, or wheels are worn and damaged.
Microwave won't heat but runs? A faulty diode cable assembly prevents power conversion. DIYers report 10-minute fixes after diagnosing the issue.
Replaced the high voltage diode. You will need a special Torx screwdriver to remove the tamper resistant screws holding the cover. Once the cover is removed there should be a packet inside containing a schematic and detailed troubleshooting instructions. I used extreme caution to discharge the capacitor. The rest was simple. One screw and a push connector to remove and reinstall the diode. I fired it up and it was good as new. Thanks to AppliancepartsPros for the good guidance and extremely... Read more
Stainless steel control panel housing for microwave display and buttons. Replace if cracked, damaged, or cosmetically worn. Installs at top of unit.
Replaced the control panel Read more
Microwave tripping the breaker or won't power on? This thermostat protects against overheating. Common fix when the unit is dead. Moderate DIY repair.
Tried to turn the microwave on, checked the outlet for power, check the breaker to see if it was tripped, all was in order. Removed the over the range microwave and pull the covers, Tested continuity with a multimeter for each of the 4 normally closed thermostats, found 2 bad (open). The upper 110 and the lower right 70. Ordered the needed parts as well as both lamp sockets and bulbs as they where broken too. The parts where correct and where delivered on time. (Also, in your tools needed or... Read more
Microwave tripping breaker when door opens or at startup? A failed monitor switch with welded contacts is the likely cause. 30-minute DIY repair.
By replacing the switches. Read more
Fix uneven heating or broken turntable rotation with this microwave turntable assembly. Supports and rotates the glass tray for even cooking. DIY install.
It allowed the turntable to rotate level. Read more
Holds the light bulb in your microwave. Replace if bulbs keep blowing, socket is cracked, or light won't work. Confirm fit with your model number.
Secures your microwave door handle to the door panel. Replace this support bracket if it's cracked, broken, or missing to restore handle stability.
Watched the repair video on AppliancePartsPros.com and ordered two small parts. Would not have been able to do the repair without that video... or at least, wouldn't have been able to do the repair without perhaps forcing out the inner door and breaking some plastic tabs, leading to a VERY expensive repair. I saved a couple hundred dollars doing it myself. Read more
White microwave door assembly installs on front of unit. Replaces cracked, broken, or damaged doors with worn handles or shattered glass panels.
Ordered new door. Read more
Microwave not heating or making loud buzzing noise? The high voltage diode regulates power to the magnetron. DIY repair typically takes 30-45 minutes.
LG Help-line said probably a failed magnetron, but since out of warranty,referred me to an authorized LG repair service. They wanted $79.95 service call to come out & diagnose problem. I ordered replacement magnetron for less than cost of a service call, Plus the part was delivered next day! Works like new again. Happy wife = happy life! Notes for DYI-ers: 1.Be careful removing over the stove microwaves--get help,they are heavier than you think. 2.Unplug microwave for 48 hrs, carefully... Read more
The Door Key is an OEM part for GE microwaves. It is responsible for securely holding the microwave door closed during operation. A sturdy and reliable latching mechanism is important for safety and to prevent leaks of electromagnetic radiation.
Causes of a bad latch can include worn or damaged parts due to normal wear and tear over time. The mechanism undergoes a lot of opening and closing stress with repeated use. Impacts from improper handling can also damage latch components.
Symptoms of a bad latch include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I ordered a new part and was able to install it easily. Read more
The Installation Hardware kit is an OEM part for GE Built-In and Over-the-Range microwaves. It contains all mounting screws and brackets needed for installation into upper kitchen cabinetry.
Symptoms of faulty or inadequate hardware include:
Causes can be stripped screw holes, worn brackets, or omitted/lost original hardware disrupting a snug fit. Replacing with this hardware ensures safe support of weighty microwaves above cooktops.
Compatible with GE Profile, Hotpoint, and some Kenmore units, it facilitates installation or re-installation without frustration.
This is a complete microwave door assembly in black, including the outer panel, inner choke cover, handle, hinges, and door latch components. The door seals the microwave cavity to contain microwave energy safely during operation. Replace this assembly if the door is cracked, the latch no longer engages properly, the microwave won't start, or the door doesn't close securely.
I removed one screw from the vent cover on front top of the microwave and removed the cover. This is necessary in order to replace the door. I then lifted the door off of the hinges and then reversed the process. I opted to replace the entire door because it was cheaper than replacing the handle, plus it took less time. Read more
Grease filter for range hoods and over-the-range microwaves. Dimensions: 5-1/16" x 7-5/8" x 3/32" (5.0625 x 7.625 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.
Slid in new ones Read more