Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Microwave not heating or humming loudly? The high-voltage diode converts AC to DC for the magnetron. Repair takes 30-45 minutes with basic tools.
I replaced both the Magnetron and the high voltage diode. I now have a fully functional microwave. I received the parts on time and the quality was good. I would use appliance parts pro's again. Read more
Microwave completely dead with no lights or display? Failed thermostat is a common cause. This thermal safety switch prevents overheating. DIY repair in 1-2 hours.
I attempted to diagnose the four thermostats/thermal switches in the microwave....two right behind the control panel, one on top of the cooking cabin, and one under a metal shroud above the magnetron. While checking continuity with a voltmeter, i questioned one of them behind the control panel and the one above the magnetron. I then noticed a burn mark on the plastic connector sleeve for the one above the magnetron. I took a scrap piece of 14 gage copper wire and beat the ends flat with a... Read more
Glass cover that protects the cooktop light bulb on your over-the-range microwave. Replace if cracked, broken, or missing to restore appearance.
Screwdriver Read more
Secures microwave to mounting bracket. Replaces stripped, cross-threaded, or missing cage nuts. Installs inside cabinet housing for stable installation.
I took the machine screws out of the outer panel for the right side only. Then pull the panel back a bit to release the lips from the front of the machine and had immediate access to the internal assembly that housed mounting nut. Order the new parts from AppliancePartsPro.com during the Thanksgiving week. Still received via FedEx in short time due to their same day shipping - which was greatly appreciated and surprising. Most small part places take a while to get the product out the door,... Read more
Connects the turntable motor to the glass tray in your microwave. Replace if cracked, broken, or stripped teeth prevent the tray from rotating smoothly.
Opened up hinged bottom of microwave and saw that the old motor had come loose from its secure position. I decided to replace the old motor with the new one and secured it into place, which was very simple--just a matter of unplugging the old motor's connection; plugging in the new one; securing the motor in place with one screw; closing up the hinged bottom; putting in the new coupler; and checking to see if it works. It did! Read more
The Fuse is an OEM part for GE microwaves. It serves as a safety device that protects the microwave by breaking the circuit if there is a power surge or electrical fault. This helps prevent damage to the microwave's components and ensures safe operation.
You should replace the fuse if it becomes blown or damaged. Causes of a bad fuse can include power surges, electrical faults, or issues within the microwave such as overheating. These factors can cause the fuse to blow, rendering the microwave inoperable.
Symptoms of a bad fuse include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Fix a wobbling or scraping microwave tray with a new turntable roller ring. Supports the glass tray for smooth rotation and even heating. Easy DIY fix.
Microwave has no power or won't start? A faulty cavity thermostat often causes complete shutdowns. This part restores temperature control in 5-10 minutes.
Replacement vent grille that covers the top or front vent opening on your microwave. Install to replace a cracked, broken, or missing grille for a finished look.
Replacement cooking tray for over-the-range microwaves. Replaces cracked, warped, or missing trays. Installs inside cavity to support food during cooking.
This rivet assembly is a direct-replacement fastening piece used to secure appliance panels and components, restoring a stable, rattle-free fit and preventing movement caused by worn or broken rivets. What it does:
I replaced the stirrer fan cover and fan, which had some carbon and slight burn marks on it. It was difficult to remove the fan cover as it did not rotate. I had to pry it off with a flat blade screwdriver, breaking the plastic tabs on the cover (which was being discarded anyway). I then cleaned any visible carbon deposits and replaced the cover and fan, using the old stirrer fan holder as it appeared OK. However, I was unable to rotate the cover into the locked position so I could not insert... Read more
Mounting bracket support that secures your microwave to the cabinet or wall. Replace if cracked, bent, or damaged during installation to restore stability.
Installer missed drilled the hole for the mounting bolt so it was at an angle. To top that off, he had cross-threaded the bolt into the bracket and it couldn't be removed. Had to saw that bolt off to get the oven down. Looked up Appliance Parts Pros (as I've done in the past), checked their diagram, found the part(s), made the order, and received them quickly. Oven is done! Appliance Parts Pros makes it easy for the DIY'er to get the right part at a fair price. I'll use them again! Read more
The Microwave Gas Sensor is a vital component for maintaining the safety and efficiency of your microwave. This genuine OEM part is specifically designed to work seamlessly with Samsung microwave models, ensuring a perfect fit and optimal performance. The sensor continuously monitors gas levels within the appliance, helping to detect any irregularities that could pose safety risks. By accurately identifying gas leaks or malfunctions, it plays a crucial role in preventing potential hazards in your kitchen. Installing the Microwave Gas Sensor is straightforward, making it an ideal choice for DIY repairs. Replacing a faulty sensor with this genuine OEM part restores your microwave's reliable operation, giving you peace of mind and extending the life of your appliance. Trust in the quality and compatibility of this gas sensor to enhance the functionality and safety of your Samsung microwave.
Unplugged power cord. Removed the microwave from over the range. Removed vent and screws on of microwave, which allowed me to remove compartment containing sensor at upper left area of microwave. Removed clamp holding sensor. Removed and replaced sensor. Reversed process and reinstalled unit. Read more
Secures microwave components and mounting brackets. Replace this hardware assembly if screws are stripped, bolts are missing, or fasteners are damaged.
Got the right part the first time and at my door in 2 days. Thank you for the great service. Read more
Restores safe power to your microwave light. Replace if socket is heat-damaged, loose, or lights won't turn on. Verify fit with your model number.
Looked at youtube for a video of how to fix and it was very easy to follow. Worked perfectly! Read more
Rear wall mounting plate bracket that supports over-the-range microwaves during installation. Replace if bent, broken, or missing for secure wall mount.
Bought these two pieces through Appliance Parts Pro - they matched exactly at half the cost. Shipped same day. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.