Kbs5 Parts

Sealer for refrigerant line insulation.

This replacement power cord restores electrical connection to the appliance, providing a safe and reliable feed when the original cord is damaged or worn. It's a direct-fit wiring component meant for like-for-like replacement. What it does:

• Delivers AC power from the wall outlet to the appliance so it can operate.
• Replaces cords that are frayed, cut, melted, scorched, or have exposed wiring.
• Helps stop intermittent power, arcing at the plug, or appliances that won't power on due to cord damage.
• Works with the appliance's factory power inlet and strain-relief system when installed correctly.

• One replacement power cord.

• Always disconnect power at the breaker and unplug the appliance before installing.
• Match this cord to the appliance's original cord and connect using the existing terminals or connector; do not splice or alter wires.
• Use the proper strain relief and secure the cord to prevent pulling or chafing.

Replacement control knob that restores smooth, easy operation to a damaged, worn, or missing control knob. Simple push-on fit provides a secure grip for selecting settings and returns the control panel to a finished appearance. What it does

• Fits onto the appliance control shaft so you can turn and set functions reliably.
• Replaces cracked, stripped, chipped, or missing knobs that are hard to grip or won't turn.
• Restores tactile feel and clear position selection for safe, predictable control.
• Works as a direct-fit user control component—no internal parts required.

• Always disconnect power (unplug or switch off breaker) before replacing control components.
• Confirm control is in the OFF position, then align the knob with the control shaft and push on straight until fully seated.
• Do not force or hammer the knob onto the shaft; check for correct alignment of flats or splines.
• After installation, restore power and verify proper function before normal use.

This bin latch secures a refrigerator door bin to the door rail so your bin stays in place and won't tip or fall during use. It replaces a cracked, broken or worn latch to restore secure bin retention. What it does:

• Secures the door bin to the refrigerator door so contents stay in place
• Prevents the bin from popping out or tipping when opening the door
• Replaces damaged, cracked or worn latches that no longer hold
• Works with compatible door bins that use a snap-in latch retainer

• One bin latch

• Remove the door bin before replacing the latch to avoid dropping contents
• Snap the new latch into the bin until it clicks; it locks in place on the door rail
• Use care to avoid cracking the bin when prying out the old latch
• Disconnect power only when working near electrical components; follow all safety precautions

This electronic control assembly regulates the appliance's operation, simplifying cycle selection and timed functions so the unit runs as designed. It restores control communication between user inputs and internal components. What it does

• Receives user commands and runs the selected cycles or modes.
• Controls timing, relay outputs and signals to motors, pumps, valves or heaters.
• Manages the control panel display and indicator lights.
• Common symptom indicators: unresponsive controls, no power to cycles, error codes, or cycles that won't start/advance.

• Disconnect power before service to avoid electrical shock.
• Handle the board by edges and avoid static discharge; use ESD protection if available.
• Verify connectors are fully seated and wiring harness orientation before reassembly.

This factory replacement screw secures appliance components. It replaces missing or worn hardware to restore a tight, aligned fit for panels, brackets, and assemblies—reducing rattles and keeping parts firmly in place during everyday use.

• Fastens covers, brackets, trim, or internal assemblies to the cabinet/frame
• Replaces stripped, rusted, or missing hardware
• Helps correct loose or misaligned panels or handles
• Can reduce vibration noise caused by unsecured parts

• Disconnect power; shut off water or gas supply if applicable
• Use the correct driver/bit; hand-start threads to avoid cross-threading
• Tighten snugly without overtightening to prevent damage
• Replace any companion clips or grommets if worn

This freezer door gasket replaces a worn or torn seal to help restore a tight door closure and maintain proper cold temperatures. It seals the door edge to reduce air leaks and improve efficiency. What it does

• Forms a continuous seal around the freezer door to help prevent warm air from entering the compartment
• Helps maintain consistent internal temperatures and reduces frost buildup when sealing correctly
• Commonly replaced for visible cracks, tears, or warped sections that no longer seat properly
• Supports appliance energy efficiency by minimizing cold-air loss

• One replacement freezer door gasket

• Designed for drop-in replacement; remove the old seal and align new gasket into the door channel
• Warm the gasket slightly to ease positioning if needed; avoid overheating
• Inspect door hinge and strike for alignment before final installation to ensure a proper seal
• Disconnect power and follow basic safety precautions when working on the appliance

This upper ice crusher bin holds and channels crushed ice inside the freezer so the dispenser delivers manageable, crushed ice. It replaces a cracked or damaged crusher bin to restore proper ice storage and flow. What it does:

• Collects crushed ice produced by the crusher assembly and guides it to the dispenser chute
• Prevents crushed ice from spilling into the freezer compartment
• Helps reduce ice jams and uneven dispensing when undamaged
• Fits into the upper crusher housing to maintain correct clearance for the crusher mechanism

• Disconnect power to the refrigerator before starting any repair
• Remove remaining ice and any loose items from the ice area before removing the bin
• Handle the plastic bin carefully to avoid cracking; align tabs and slides when reinstalling
• If other crusher components are damaged or ice continues to jam, inspect the crusher assembly and dispenser parts

This is a genuine replacement screw used to secure panels, brackets, and components on compatible Whirlpool appliances. It restores proper fastening so loose parts stop rattling and panels stay aligned. What it does

• Fastens trim, panels, brackets, or mounting hardware to appliance chassis
• Helps stop vibration and rattling caused by missing or stripped fasteners
• Restores secure connections after repair or part replacement
• Matches OEM thread specification to fit intended mounting holes

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand and tighten until snug; do not overtighten
• Inspect mating threads and replace if damaged

This electro kit is a replacement wiring harness and connector assembly that restores electrical connections between controls and key components. Installing the kit can help resolve intermittent power, non-responsive controls, or complete loss of function. What it does:

• Replaces damaged or worn wiring and connectors to restore proper electrical flow.
• Re-establishes connections between the control board and components so controls respond correctly.
• Helps address intermittent electrical failures, loss of function, or error symptoms related to open/short circuits.
• Matches OEM-style connectors and terminals for a proper fit when the kit is the correct part for the model.

• Disconnect power (unplug or turn off breaker) before starting any work.
• Basic electrical experience recommended;
• Do not operate the appliance with exposed or unsecured wiring; route and secure harness per OEM routing.

6 - 19 x .250

This terminal cover protects the appliance's power terminal block by shielding live connections and reducing the risk of accidental contact. It restores a missing or damaged cover so the terminal area is safer and neater. What it does:

• Shields the terminal block to help prevent accidental contact with live electrical connections.
• Helps contain and hide the power cord connection for a cleaner appearance.
• Used when the original cover is cracked, broken, missing, or shows signs of arcing or heat damage.
• Supports safe service access by covering exposed terminals during normal operation.

• Disconnect power at the breaker or unplug the appliance before servicing to avoid shock or injury.
• Access the terminal area; ensure terminals are cool and dry before handling.
• Align cover over the terminal block and secure according to the OEM design; replace any damaged fasteners with correct OEM parts.
• If you see burn marks, melted insulation, or loose terminals, replace or repair the affected wiring/terminal block before installing the cover.

This top door hinge secures the refrigerator door to the cabinet and lets the door pivot smoothly. Replace a worn hinge to restore proper door alignment and even sealing for better cooling performance. What it does

• Supports the top of the refrigerator door and provides the pivot point for opening and closing.
• Helps keep the door aligned so the gasket seals properly and cold air stays inside.
• Worn or damaged hinge can cause door sag, uneven gaps, rubbing, or noisy operation.
• Restoring the hinge can reduce stress on the door and other hinge components.

• One top door hinge.

• Basic hand tools are usually required; support the door while removing or installing hinges to prevent injury or door damage.
• Disconnect power only if working near electrical components; this hinge replacement typically does not require electrical disconnection.
• If the door was removed, recheck alignment and gasket contact after reinstalling; adjustments may be needed.
• Follow OEM instructions and use proper safety equipment.